Spexx
Sr. Member
Offline
Activity: 350
Merit: 250
Mining Co-operative
|
|
March 04, 2015, 10:21:26 AM |
|
As for a CUDA miner for XMG, well I suspect (no proof whatsoever) that there has been one around for ages now but nobody has published it openly. It must surely be possible, though not necessarily easy. Well, I can sustain your suspect as one of my contacts (who I know works in a company which pays its employees to get multiple degrees) claimed to be able to port everything in "a few days" but also that "our usual contracts are just way more profitable" so hopefully its impact is small. I have no doubt that someone knowledgeable could do just that. I would be fascinated, from a purely technical point of view you understand , how such a CUDA miner would actually perform. My experiments with compiling the XMG miner included having a go at making something that might just run on a 386/486 similar to the type of (multiple) processor you get on GPU cards and Co-Processor cards. It worked. I described it once on IRC as "runs like a sloth on dope" but if you had hundreds of them it could add up.
|
|
|
|
hefty
|
|
March 04, 2015, 12:04:41 PM |
|
Having been offline for a time, I have a lot of catching up to do on this thread. Two things to reply to posts on the (current) last page are that:- 1) I will be writing a comprehensive guide for XMG mining on Windows. 2) I will be releasing a new XMG mining suite for Windows in due course and this will include the option to run the miner windowless (along with a desktop icon to stop the windowless miner, which might otherwise be a bit of a problem). I have just put together a new mining rig. We are talking AMD 9590. The speed of this CPU is staggering. The heat from this CPU is staggering. I have already overclocked it to just over 5200 MHz which gives 122 Kh/s with the XMG miner under Windows 8.1 but I can't maintain a safe core temperature at this speed even with a massive water cooler and fans running max rpm. Anybody got any liquid Nitrogen that I can play with? This new rig has been named "Wolf" in honor. Thanks man. hi spexx you dont need nitro you can try this fans https://www.youtube.com/watch?v=ThsuBvPkGcc, and bench on north pole great performance though. i overclocked 8320 at 5014/1.58vcore hot as hell on water and one same core always failing after hour of prime blended. can you send me your hash non overclocked 9590 when you have time. cheers
|
|
|
|
Spexx
Sr. Member
Offline
Activity: 350
Merit: 250
Mining Co-operative
|
|
March 04, 2015, 12:52:56 PM |
|
Having been offline for a time, I have a lot of catching up to do on this thread. Two things to reply to posts on the (current) last page are that:- 1) I will be writing a comprehensive guide for XMG mining on Windows. 2) I will be releasing a new XMG mining suite for Windows in due course and this will include the option to run the miner windowless (along with a desktop icon to stop the windowless miner, which might otherwise be a bit of a problem). I have just put together a new mining rig. We are talking AMD 9590. The speed of this CPU is staggering. The heat from this CPU is staggering. I have already overclocked it to just over 5200 MHz which gives 122 Kh/s with the XMG miner under Windows 8.1 but I can't maintain a safe core temperature at this speed even with a massive water cooler and fans running max rpm. Anybody got any liquid Nitrogen that I can play with? This new rig has been named "Wolf" in honor. Thanks man. hi spexx you dont need nitro you can try this fans https://www.youtube.com/watch?v=ThsuBvPkGcc, and bench on north pole great performance though. i overclocked 8320 at 5014/1.58vcore hot as hell on water and one same core always failing after hour of prime blended. can you send me your hash non overclocked 9590 when you have time. cheers I have already considered taking Wolf to work, where we have a dry/chilled room at 3 to 4 degrees C The Pub just down the road has a nice cold cellar too I thought about posting a pic of Wolf, but there is nothing to see. It is black. The case is black. The bezel on the DVD/RW is black. The mobo is mostly black. The cooler is black. The graphics card is black. The RAM is black. The PSU is black. All the cables are black. The fans are black. Even the bloody case screws are black. The only things not black are the LEDs. I could install some black-light LEDs instead I had to use a torch for most of the time that I was assembling it and I am not joking either. I could post up a pic of the torch. Right now I have a problem. The mobo (ASUS Sabretooth 990FX R2.0) has a faulty network interface. I got this mobo cheap in an Amazon Warehouse Deal but it was supposed to be perfect. Only the software CD was missing - not a problem since it can be downloaded. I complained and got a refund of twenty quid - about 20 percent off what I paid. Cool. A network card will cost me six and a half quid delivered and I can use up the one PCI slot which would otherwise go unused forever. This does mean that I have to wait a few days for the card to arrive before unleashing this beast on the mining pools. I will run a benchmark on stock 4700 MHz (w/o turbo boost) and another on 5000 MHz (equivalent to turbo boost) for comparison. It will run at 5000 all day in a warmish room.
|
|
|
|
hefty
|
|
March 04, 2015, 03:57:01 PM Last edit: March 04, 2015, 04:08:29 PM by hefty |
|
tooth r2.0 and chvf are best mobos for visheras, i miss my amds . I7s i have now have 2 times lower tdp and still getting hotter than visheras with same custom loops in same cases(arc 2), i need to delid them this weekend to se how much i can oc them, now my dcs are hitting 80C@4,8ghz visheras never passed 60C after 12h of prime.I had 8350 oced to 4.8 rock solid at 1.48, your beast could prob downvolt and stay at stock clock.
|
|
|
|
Spexx
Sr. Member
Offline
Activity: 350
Merit: 250
Mining Co-operative
|
|
March 04, 2015, 04:32:21 PM |
|
tooth r2.0 and chvf are best mobos for visheras, i miss my amds . I7s i have now have 2 times lower tdp and still getting hotter than visheras with same custom loops in same cases(arc 2), i need to delid them this weekend to se how much i can oc them, now my dcs are hitting 80C@4,8ghz visheras never passed 60C after 12h of prime.I had 8350 oced to 4.8 rock solid at 1.48, your beast could prob downvolt and stay at stock clock. I have downvolted a fair bit and can get it to run the XMG miner full tilt on a knife-edge in a warm room at 5083 MHz. The temperature at the heat-spreader is 42.3 degrees (measured) while the core is at 73 degrees (indicated). It's a micro-furnace. Just 0.1 degree higher at the spreader and it will stop. What amazes me is that I can push it to almost 5400 and it will boot into Windows 8.1 reliably, even when downvolted. I think I might have been lucky enough to get a particularly high quality chip here. De-lidding your Intel eh? Good luck with that. I have seen the videos ... and winced. Use some Coollaboratory Liquid Ultra in place of the stock thermal compound and you should see a massive improvement, according to reports.
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
March 04, 2015, 05:06:02 PM |
|
Share your opinion for the best slogan. There are 3 votes per members available. Last few hours for the voting is finished. The other link I posted needs a little more votes.
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
hefty
|
|
March 04, 2015, 05:49:40 PM |
|
Website looks great, good job. m i right if i say that some page`s are not finish yet?
Right. You guys doing so much work and doing it great and still manage to be best PR-s here on bcttalk, and i understand its hard to do it all in such a short time. You have team full of great people working on coin and miner development but did you consider making another m-face team for Marketing/Branding/Web/Graphic design/SEO to help you with some tasks.
|
|
|
|
hefty
|
|
March 04, 2015, 06:05:39 PM |
|
tooth r2.0 and chvf are best mobos for visheras, i miss my amds . I7s i have now have 2 times lower tdp and still getting hotter than visheras with same custom loops in same cases(arc 2), i need to delid them this weekend to se how much i can oc them, now my dcs are hitting 80C@4,8ghz visheras never passed 60C after 12h of prime.I had 8350 oced to 4.8 rock solid at 1.48, your beast could prob downvolt and stay at stock clock. I have downvolted a fair bit and can get it to run the XMG miner full tilt on a knife-edge in a warm room at 5083 MHz. The temperature at the heat-spreader is 42.3 degrees (measured) while the core is at 73 degrees (indicated). It's a micro-furnace. Just 0.1 degree higher at the spreader and it will stop. What amazes me is that I can push it to almost 5400 and it will boot into Windows 8.1 reliably, even when downvolted. I think I might have been lucky enough to get a particularly high quality chip here. De-lidding your Intel eh? Good luck with that. I have seen the videos ... and winced. Use some Coollaboratory Liquid Ultra in place of the stock thermal compound and you should see a massive improvement, according to reports. you won silicon lottery with that chip and that mobo is great, top oc on water on overclock.net is 54xx prime stable that cpu you have is beast . i already have it "Coollaboratory Liquid Pro 2" but have so much work last days i didnt done it yet on dcs, first time i was afraid doing it 2 i do it with razor slowly i dont like that yt hammer video guide , on 4770k i got 8C to 12C improvment across cores
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
March 04, 2015, 06:58:03 PM |
|
Website looks great, good job. m i right if i say that some page`s are not finish yet?
Right. You guys doing so much work and doing it great and still manage to be best PR-s here on bcttalk, and i understand its hard to do it all in such a short time. You have team full of great people working on coin and miner development but did you consider making another m-face team for Marketing/Branding/Web/Graphic design/SEO to help you with some tasks. If you have some good people who can do Marketing/Branding/Web/Graphic design/SEO let us know! Always interested!
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
goldlabel
|
|
March 04, 2015, 07:29:23 PM |
|
Website looks great, good job. m i right if i say that some page`s are not finish yet?
Right. You guys doing so much work and doing it great and still manage to be best PR-s here on bcttalk, and i understand its hard to do it all in such a short time. You have team full of great people working on coin and miner development but did you consider making another m-face team for Marketing/Branding/Web/Graphic design/SEO to help you with some tasks. yup right on the spot My respect for you guy`s if i can help i will, web/Graphic design Told 111magic allready im busy to make 1 or more vid`s for magic, dont know if they are on time for the competition if not, to bad its all for magic
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
March 04, 2015, 07:34:12 PM |
|
Website looks great, good job. m i right if i say that some page`s are not finish yet?
Right. You guys doing so much work and doing it great and still manage to be best PR-s here on bcttalk, and i understand its hard to do it all in such a short time. You have team full of great people working on coin and miner development but did you consider making another m-face team for Marketing/Branding/Web/Graphic design/SEO to help you with some tasks. yup right on the spot My respect for you guy`s if i can help i will, web/Graphic design Told 111magic allready im busy to make 1 or more vid`s for magic, dont know if they are on time for the competition if not, to bad its all for magic Thanks Goldlabel. Have a little feeling Magi has to wait for your video's. Think you are very good at that! Will sent you a pm about Graphic design.
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
March 04, 2015, 07:58:40 PM |
|
lets use the future #magi #(XMG/MAGI) coin for payment merchant/service with no fee only at http://m-epays.comThis is the winner of the Twitter slogan contest! Congrats with 1000 XMG. Thank you all for joining the contest! New campaign will start soon!
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
|
March 04, 2015, 08:07:50 PM |
|
Congratulations for the contest winner. Stick tight Magi community !
|
|
|
|
Spexx
Sr. Member
Offline
Activity: 350
Merit: 250
Mining Co-operative
|
|
March 04, 2015, 09:18:30 PM |
|
Congratulations for the contest winner. Stick tight Magi community ! Adding my congratulations here. Stick tight? You bet! Lots of cheap XMG on the exchanges now and I am buying. Come dump on me at silly prices again please
|
|
|
|
xms
|
|
March 04, 2015, 09:19:11 PM |
|
Congratulations for the winner
#magi (XMG) rule
|
XMG: 9Dqt2gQz5iNFFsMiFS3ftDd486RQQFW9Sx , BLE: JTk35RjRPD5wUzRRRUEb6t84QRvJKkfeFz
|
|
|
jefzzz
Jr. Member
Offline
Activity: 59
Merit: 10
Yungsin
|
|
March 04, 2015, 09:32:01 PM |
|
Thanks Amigo ... @103tang0 @cryptsy @bitcoingarden .... This is me : @Arinimar ( the winner of contest slogan xmg coin #magicoin ) My Original Tweet : https://mobile.twitter.com/arinimar/status/568893424536940545Bitcoin garden vote : http://bitcoingarden.tk/forum/index.php?topic=2924.msg88047#msg88047And now i want to say thanks for the vote of my slogan contest for the all who give me a vote with my slogan. And i hope magi/xmg coin become more acceptable and profitable cryptocoin for the gateway payment in the future. Thanks amigo.... My address : 9RSN3ksQ3ojf3YRcGqT7nLBaEYuwEbyzEF
|
▄▀ DICE & Binary Option ▄▀ ░░░░░░░░░░░ gogooption ░░░░░░░░░░░ (https://gogooption.com) ▄▀ 1% house edge ▄▀
|
|
|
goldlabel
|
|
March 04, 2015, 09:41:30 PM |
|
Congratzz with your winning slogan.
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
March 04, 2015, 10:00:35 PM |
|
Congrats Jefzzz! Reward is already paid!
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
dcbis0n
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 05, 2015, 03:44:21 AM |
|
Congrats on the win @Arinimar!
|
|
|
|
seeksilence
|
|
March 05, 2015, 04:43:53 AM |
|
Just spent several hours to set up a new pool with 1% fee and PROP payout. Please register at http://104.207.149.217/index.php?page=registerTest script: ./minerd -a m7mhash -o stratum+tcp://104.207.149.217:3333 -u test.test -p x See "Help -- Getting Started" for details. Please transfer some hash power to the pool. Also, please note I will disconnect the old free pool in one/two days. Thanks. Big thanks for Joe's support! I have updated the list of mining pools used by my XMG mining software package. If you are already using this software, run C:\XMGminer\Setup.bat and select "Download latest list of XMG Magi mining pools" from the drop-down menu. This will do exactly what it says on the tin. After the download has completed, select "Proceed with setup" from the drop-down menu to enter the required details to get up and running. Remember to register on XMGpool and set up your worker(s) first !!! See you there Add a domain for easy accessing the pool website: xmgpool.cfNote the script should still use the ip address. Also if the token expires while registration, you can just refill the password and pin and check the checkbox before "I agree...". BTW, Spexx, what is the download link for your newest version? I am not sure if the one on the coinmagi.org is the newest.
|
|
|
|
|