vulgartrendkill
|
|
August 21, 2013, 10:41:43 AM |
|
I want to say. I got the cable today I was at work when i got it so I could not install it and test but I will tomorrow afternoon once I get to work Cablez is a great person fast on making the cable and fast on shipping the cable paid 8/13 got it 8/19 +1 Cablez is very good at what he does
|
|
|
|
winter
Legendary
Offline
Activity: 1338
Merit: 1000
|
|
August 21, 2013, 05:22:17 PM |
|
like i said i would update when i tested the cable out. works with out a problem now my BFL is stored inside a PC case with no wires coming out the back. Looks like nothing different from a normal pc A+ for the man with the name CABLEZ
|
|
|
|
bitpop
Legendary
Offline
Activity: 2912
Merit: 1060
|
|
August 21, 2013, 10:17:22 PM |
|
Thats why his mom named him cablez
|
|
|
|
vulgartrendkill
|
|
August 22, 2013, 10:05:55 AM |
|
like i said i would update when i tested the cable out. works with out a problem now my BFL is stored inside a PC case with no wires coming out the back. Looks like nothing different from a normal pc A+ for the man with the name CABLEZ Could you post some pics for me? I'd love to see what you've done... Thanks
|
|
|
|
PerryAlmar
Newbie
Offline
Activity: 2
Merit: 0
|
|
September 09, 2013, 07:41:09 PM |
|
Hi!
Same here as winter's case above. Got myself two Jalapenos that I would like to install inside of my PC. Therefore, I'm interested in two of the 6-pin connector to two barrel plugs adapter.
The cable shown in the middle on the pictures in the beginning of the post looks good to me. Can you please send me a quote for 2 such cables?
Do you ship worldwide?
|
|
|
|
Cablez (OP)
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
September 09, 2013, 08:50:04 PM |
|
PM sent.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
vulgartrendkill
|
|
September 18, 2013, 06:22:32 AM |
|
Hi there guys, Cablez, I have yet to receive my jally for which Cablez made me a 3 barrel connector psu adapter and psu switch. I would like to ask what polarity the connectors at set at? The reason I ask is because i have two technobit bitfury boards on the way that use the same connector, and I'd like to check if the cable I have would be able to power them also. The + on the center and - on the outside is what would be needed. Thnak you in advance.
|
|
|
|
Cablez (OP)
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
September 18, 2013, 07:50:31 PM |
|
Hi there guys, Cablez, I have yet to receive my jally for which Cablez made me a 3 barrel connector psu adapter and psu switch. I would like to ask what polarity the connectors at set at? The reason I ask is because i have two technobit bitfury boards on the way that use the same connector, and I'd like to check if the cable I have would be able to power them also. The + on the center and - on the outside is what would be needed. Thnak you in advance. The cables I make for Jalapenos provide +12V on a center(+ve) 2.5mmx5.5mm DC power plug. If the technobit boards can accept connections with those specs then it should work just fine. Do a check for loose fitment first.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
Cablez (OP)
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
September 19, 2013, 12:55:21 AM |
|
Added a new cable for you guys with Raspberry Pi's. 5V molex lead to micro B USB.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
hQIweXxXe
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 19, 2013, 05:03:28 PM |
|
nice!
|
|
|
|
Roy Badami
|
|
September 26, 2013, 09:25:07 PM |
|
I'd like a cable to provide 12V 5A from a standard Molex (i.e. 8981 series) connector to a 2.1 mm barrel connector (- on the outside, + on the inside), but I'd like it to have an inline 5A fuse. Yeah, I know the fuse is probably unnecessary, but humour me - it just makes me more comfortable to include a fuse when I'm replacing a 60W brick with a 1000W ATX PSU.
Are you able to make this up for me? I'd probably buy two so I have a spare for future expansion.
(This is for powering an Anker USB hub, BTW)
roy
|
|
|
|
Cablez (OP)
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
September 26, 2013, 09:45:32 PM |
|
Hey Roy, It is certainly doable to add an inline fuse to the power cable. It would be the first time I have had to do something like this for 5v though. I will PM you with the details of the holder/fuse I find.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
Roy Badami
|
|
September 26, 2013, 09:57:20 PM |
|
Hey Roy, It is certainly doable to add an inline fuse to the power cable. It would be the first time I have had to do something like this for 5v though. I will PM you with the details of the holder/fuse I find. Not 5V. 12V. So I guess the hub must have a DC-DC converter (or the brick is mislabelled?). I'll check with a meter but I'm assuming the brick is correct. roy EDIT: Re fuse, either 20mm or 1 1/4" is fine.
|
|
|
|
winter
Legendary
Offline
Activity: 1338
Merit: 1000
|
|
September 28, 2013, 05:40:57 PM |
|
Bought another cable from cablez and worked out again 100% smooth as butter thanks again you rock
|
|
|
|
Cablez (OP)
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
September 28, 2013, 06:27:28 PM |
|
Bought another cable from cablez and worked out again 100% smooth as butter thanks again you rock I am glad I could help and make your setup that much nicer.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
rupy
|
|
October 22, 2013, 08:07:10 AM |
|
|
BANKBOOK GWT Wallet & no-FIAT Billing API
|
|
|
Cablez (OP)
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
October 22, 2013, 12:14:12 PM |
|
I can help you with that, for sure. I will reply in that thread with my thoughts.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
zerocode20
Member
Offline
Activity: 84
Merit: 10
|
|
October 22, 2013, 07:07:27 PM |
|
Update, just bought this http://www.newegg.com/Product/Product.aspx?Item=N82E16817153145I want 6 cables with 2 plugs on each that plug directly into the PSU. I will mail the cables that come with it to you for modification. Want to run the 4 singles im getting and expand to 12 in the future. I also will send you the cpu cable for you to add a power toggle switch. Basically how many btc for adding 12 12v plugs and a switch then shipping it back? I am on the west coast usa. I will give great feeback This is my favorite PSU
|
"That which you call your soul or spirit is your consciousness, and that which you call 'free will' is your mind's freedom to think or not, the only will you have, your only freedom, the choice that controls all the choices you make and determines your life and your character."
|
|
|
johnnyc
Newbie
Offline
Activity: 26
Merit: 0
|
|
November 23, 2013, 10:06:05 PM |
|
Thanks Cablez! Received my 2 5V molex lead to micro B USB cables, 2 cables for the BFL jalas and power switch. All work perfectly. Great job!
|
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
November 26, 2013, 11:42:44 PM |
|
Hopefully you are still making cables Hi, I'd like 4 PCI-e Y cables 40cm i.e. from 1 barrel to 2 plugs (and make sure both ends of the Y are 40cm - don't skimp on making one of each pair shorter like last time) And more: 4 PCI-e cables from barrel to just crimped pins on the other end - 40cm again - so I can extend a PCI-e cable and plug it into these sort of connectors - the left hand side I mean of course: http://www.automatedshadestore.com/shop/avactis-images/4-Wire-Connector.pngThey need to handle at least 100W (12V 8.333A) per wire - is that what your standard cables handle? 6 pins for all cables ... unless it's possible to do a barrel that can handle both 6 and 8? If so then 8 would be better of course. If you can do an 8 - then let me know the cost difference between 6 and 8 so I can decide. Now for an optional tricky cable (2 of them): Can you make an OCZ 1250 modular PSU PCI-e cable? The catch of course is the connector that plugs into the PSU since each PSU company seems to have their own shape/pattern. These would be 8 pins with the non-PSU end of the plug being a split 8/6 plug like the OCZ ones. And lastly - I ordered 2 arctic fans from amazon the other day and they got here in only 3 days over a weekend (Australia) - can you do that also? Let me know how much that all adds up to in BTC and how quickly I can get them
|
|
|
|
|