["WAIT LIST"] BFL Mini-Rig Order Date/Ship Date

[Inspector 2211]

Dust,

         that explains it. You didn't jump the line at all - I just got my tracking number today, estimated delivery date is Saturday 8-11.
I don't know whether FedEx really delivers on Saturday, though.

edit: now the estimated delivery date shows 8-14

Cheers and no offense,

Harry C.

[FalscherGold]

Inaba got my Mini-Rig yesterday. 8/10/2012.

[papaminer]

Anybody want to sell 1 mini rig to me?

Please PM me.. what are your conditions.. ( no weird conditions please)

Located in Sacramento, California

[Inspector 2211]

Anybody want to sell 1 mini rig to me?

Please PM me.. what are your conditions.. ( no weird conditions please)

Located in Sacramento, California

If my doctor tells me on Monday, after viewing the ultrasound images and blood work done on Friday, that I have terminal liver cancer or something in that ballpark, the miniRig is of no use to me, and I can sell it to you for what I paid for it.
(I'm not kidding - I wouldn't be kidding about topics such as this one.)

Of course, I sincerely hope that the tests show that I do not have any kind of cancer, and no liver cirrhosis, either.

[jamesg]

Anybody want to sell 1 mini rig to me?

Please PM me.. what are your conditions.. ( no weird conditions please)

Located in Sacramento, California

If my doctor tells me on Monday, after viewing the ultrasound images and blood work done on Friday, that I have terminal liver cancer or something in that ballpark, the miniRig is of no use to me, and I can sell it to you for what I paid for it.
(I'm not kidding - I wouldn't be kidding about topics such as this one.)

Of course, I sincerely hope that the tests show that I do not have any kind of cancer, and no liver cirrhosis, either.

I sincerely hope that your tests results don't show that also, but if they do, I'll give you $1k more than he will.

Just sayin....

[Cablez]

I also hope all is going to be well with you inspector.

I would pay you +$1000 on any serious offer you get if you do decide you will sell.

[Michail1]

I see a possible auction as I would also be interested; however, I would be more interested in the test results.

Best Wishes.

[BlackPrapor]

Anybody want to sell 1 mini rig to me?

Please PM me.. what are your conditions.. ( no weird conditions please)

Located in Sacramento, California

If my doctor tells me on Monday, after viewing the ultrasound images and blood work done on Friday, that I have terminal liver cancer or something in that ballpark, the miniRig is of no use to me, and I can sell it to you for what I paid for it.
(I'm not kidding - I wouldn't be kidding about topics such as this one.)

Of course, I sincerely hope that the tests show that I do not have any kind of cancer, and no liver cirrhosis, either.

Wish you all the best man. If you do need to sell the rig, do it on eBay 

[papaminer]

I am sorry about this... inspector..

I'd rather pray for ur health than having a mini rig...

that's all i have to say...

[Inspector 2211]

I'm happy to say that both the blood test and the ultrasound images did not show anything wrong with my liver.
The excruciating abdominal pain    when coughing, which I experienced on Friday, remains unexplained, however.
Today, the pain was less severe - but not completely gone, either.

My miniRig is scheduled to arrive tomorrow (Tuesday).
Today, AT&T installed a Uverse line in my third mining office, which will be dedicated to the miniRig.
(My other two mining offices contain 10 BFL singles, each, but about 2 months from now, they will host 12 and 13 Singles, respectively.
Once I have traded the 25 Singles and the FPGA miniRig for two ASIC rigs, I will go back to renting only one or two offices, most likely two.)

Thanks for all the good wishes!

[Michail1]

I'm happy to say that both the blood test and the ultrasound images did not show anything wrong with my liver.
The excruciating abdominal pain    when coughing, which I experienced on Friday, remains unexplained, however.
Today, the pain was less severe - but not completely gone, either.

My miniRig is scheduled to arrive tomorrow (Tuesday).
Today, AT&T installed a Uverse line in my third mining office, which will be dedicated to the miniRig.
(My other two mining offices contain 10 BFL singles, each, but about 2 months from now, they will host 12 and 13 Singles, respectively.
Once I have traded the 25 Singles and the FPGA miniRig for two ASIC rigs, I will go back to renting only one or two offices, most likely two.)

Thanks for all the good wishes!

Congrats!

[Cablez]

Very good to hear Inspector, take care of yourself.    Back on topic:  #of mini-rigs purchased by me = 100................in a dream I had.

[tytus]

I have picked up my rig today ... there are no instructions in the box :-) how do You use the rig ? do I have to install the easy-miner from the bfl page (http://www.butterflylabs.com/drivers/) ? I hope I can use this on a linux machine :-(

[rjk]

I have picked up my rig today ... there are no instructions in the box :-) how do You use the rig ? do I have to install the easy-miner from the bfl page (http://www.butterflylabs.com/drivers/) ? I hope I can use this on a linux machine :-(

Plug in to USB, install and run cgminer, shouldn't be any more complicated than that.

[tytus]

Thanks, running. I had to add -S for all devices by hand though (debian). Did anybody try to tune the speed with the bfl driver: "Auto-Tune Package – For speed tuning Mini Rigs" ?

[WhitePhantom]

Thanks, running. I had to add -S for all devices by hand though (debian). Did anybody try to tune the speed with the bfl driver: "Auto-Tune Package – For speed tuning Mini Rigs" ?

Three weeks ago (there may be an updated version out now?), the auto-tune package hosed about 10 of the FPGAs in my two rigs.  Sonny sent me two firmware packages to load manually, which fixed the issue.  I also found that updating the firmware on one FPGA while the rest are mining almost always resulted in a bad firmware update, requiring me to do it over several times until I realized what was wrong.

Here are the two firmware packages Sonny sent to me.
https://www.box.com/s/e8cd6a2e651cc87b604c

What I did in the end was to use EasyMiner to view the properties of each FPGA and identify which ones were using the 1320 MH/s firmware.  I updated each of them to use the 1500 MH/s firmware and then mined with them for a while to see if errors showed up.  All but one had a 20%+ error rate, so I flashed them back to the 1320 MH/s firmware.

The Mini-Rig FPGAs don't throttle when there are errors, so I guess it was worthwhile since I got one running at 1500 MH/s with only a 2% error rate in exchange for a 13% speed increase.

[tytus]

I use cgminer but have little experience with this sa far and have problems with the interpretation of the output.

 cgminer version 2.6.4 - Started: [2012-08-14 20:53:04]
--------------------------------------------------------------------------------
 (5s):24426.6 (avg):25884.2 Mh/s | Q:478  A:4912  R:26  HW:0  E:1028%  U:263.3/m
 TQ: 0  ST: 20  SS: 0  DW: 65  NB: 3  LW: 7930  GF: 0  RF: 0
 Connected to ... with LP as user ...
 Block: 0000066476ac30aede3828015e1fe66d...  Started: [21:10:31]
--------------------------------------------------------------------------------
 [P]ool management [.]ettings [D]isplay options [Q]uit
 BFL  0:  46.5C         | 1491.5/1492.8Mh/s | A:154 R:1 HW:0 U: 8.26/m
 BFL  1:  47.0C         | 1491.7/1492.8Mh/s | A: 45 R:0 HW:0 U: 2.41/m
 BFL  2:  37.9C         | 1491.7/1489.0Mh/s | A:186 R:1 HW:0 U: 9.97/m
 BFL  3:  42.3C         | 1491.6/1489.0Mh/s | A: 64 R:0 HW:0 U: 3.43/m
 BFL  4:  45.6C         | 1491.7/1489.0Mh/s | A: 76 R:0 HW:0 U: 4.07/m
 BFL  5:  37.6C         | 1491.7/1489.0Mh/s | A: 93 R:0 HW:0 U: 4.99/m
 BFL  6:  37.5C         | 1314.9/1316.3Mh/s | A:357 R:3 HW:0 U:19.14/m
 BFL  7:  40.7C         | 1314.9/1316.3Mh/s | A:335 R:2 HW:0 U:17.96/m
 BFL  8:  43.8C         | 1314.9/1316.3Mh/s | A:346 R:2 HW:0 U:18.55/m
 BFL  9:  39.9C         | 1314.9/1316.3Mh/s | A:329 R:3 HW:0 U:17.64/m
 BFL 10:  43.4C         | 1314.9/1316.3Mh/s | A:327 R:1 HW:0 U:17.53/m
 BFL 11:  37.8C         | 1313.9/1312.4Mh/s | A:305 R:1 HW:0 U:16.35/m
 BFL 12:  39.1C         | 1313.9/1312.4Mh/s | A:344 R:2 HW:0 U:18.44/m
 BFL 13:  35.5C         | 1313.8/1312.4Mh/s | A:325 R:1 HW:0 U:17.42/m
 BFL 14:  37.9C         | 1314.0/1312.4Mh/s | A:329 R:3 HW:0 U:17.64/m
 BFL 15:  38.5C         | 1313.8/1312.4Mh/s | A:310 R:1 HW:0 U:16.62/m
 BFL 16:  40.4C         | 1313.9/1312.4Mh/s | A:331 R:3 HW:0 U:17.74/m
 BFL 17:  34.6C         | 1313.9/1312.4Mh/s | A:369 R:2 HW:0 U:19.78/m
 BFL 18:  37.4C         | 1313.9/1312.4Mh/s | A:304 R:0 HW:0 U:16.30/m
--------------------------------------------------------------------------------

I see that:
- there are 19 devices
- the devices that report higher hash rate (MH/s) have few accepted shares (A:...) and low utility (U:...)
- there are no hardware (HW:0) errors

... to see this in easyminer I would have to connect it to a windows machine :-(

[BlackPrapor]

I use cgminer but have little experience with this sa far and have problems with the interpretation of the output.

 cgminer version 2.6.4 - Started: [2012-08-14 20:53:04]
--------------------------------------------------------------------------------
 (5s):24426.6 (avg):25884.2 Mh/s | Q:478  A:4912  R:26  HW:0  E:1028%  U:263.3/m
 TQ: 0  ST: 20  SS: 0  DW: 65  NB: 3  LW: 7930  GF: 0  RF: 0
 Connected to ... with LP as user ...
 Block: 0000066476ac30aede3828015e1fe66d...  Started: [21:10:31]
--------------------------------------------------------------------------------
 [P]ool management [.]ettings [D]isplay options [Q]uit
 BFL  0:  46.5C         | 1491.5/1492.8Mh/s | A:154 R:1 HW:0 U: 8.26/m
 BFL  1:  47.0C         | 1491.7/1492.8Mh/s | A: 45 R:0 HW:0 U: 2.41/m
 BFL  2:  37.9C         | 1491.7/1489.0Mh/s | A:186 R:1 HW:0 U: 9.97/m
 BFL  3:  42.3C         | 1491.6/1489.0Mh/s | A: 64 R:0 HW:0 U: 3.43/m
 BFL  4:  45.6C         | 1491.7/1489.0Mh/s | A: 76 R:0 HW:0 U: 4.07/m
 BFL  5:  37.6C         | 1491.7/1489.0Mh/s | A: 93 R:0 HW:0 U: 4.99/m
 BFL  6:  37.5C         | 1314.9/1316.3Mh/s | A:357 R:3 HW:0 U:19.14/m
 BFL  7:  40.7C         | 1314.9/1316.3Mh/s | A:335 R:2 HW:0 U:17.96/m
 BFL  8:  43.8C         | 1314.9/1316.3Mh/s | A:346 R:2 HW:0 U:18.55/m
 BFL  9:  39.9C         | 1314.9/1316.3Mh/s | A:329 R:3 HW:0 U:17.64/m
 BFL 10:  43.4C         | 1314.9/1316.3Mh/s | A:327 R:1 HW:0 U:17.53/m
 BFL 11:  37.8C         | 1313.9/1312.4Mh/s | A:305 R:1 HW:0 U:16.35/m
 BFL 12:  39.1C         | 1313.9/1312.4Mh/s | A:344 R:2 HW:0 U:18.44/m
 BFL 13:  35.5C         | 1313.8/1312.4Mh/s | A:325 R:1 HW:0 U:17.42/m
 BFL 14:  37.9C         | 1314.0/1312.4Mh/s | A:329 R:3 HW:0 U:17.64/m
 BFL 15:  38.5C         | 1313.8/1312.4Mh/s | A:310 R:1 HW:0 U:16.62/m
 BFL 16:  40.4C         | 1313.9/1312.4Mh/s | A:331 R:3 HW:0 U:17.74/m
 BFL 17:  34.6C         | 1313.9/1312.4Mh/s | A:369 R:2 HW:0 U:19.78/m
 BFL 18:  37.4C         | 1313.9/1312.4Mh/s | A:304 R:0 HW:0 U:16.30/m
--------------------------------------------------------------------------------

I see that:
- there are 19 devices
- the devices that report higher hash rate (MH/s) have few accepted shares (A:...) and low utility (U:...)
- there are no hardware (HW:0) errors

... to see this in easyminer I would have to connect it to a windows machine :-(

This is just a few minutes after start. Keep it running for at least 1 hour, then make a screenshot =). I've got 1 box with 19 units too btw.

[Garr255]

- there are 19 devices

This is because one MiniRig is actually 20 (+/- 1) Next generation Singles (which probably won't ever be sold individually).

[WhitePhantom]

- there are 19 devices

This is because one MiniRig is actually 20 (+/- 1) Next generation Singles (which probably won't ever be sold individually).

Both of mine have 18, but each one hashes at the advertised speed.