Um... well, you might want to flash the firmware as a first step. Go to
S4 Firmware to get it from Bitmain.
Also, make sure you don't have that miner exposed to the outside world (i.e. you don't have port forwarding to it). Change the password for sure.
Wow, where did you get the miner? Maybe seller flashed it with his own info but looking at the address your not the only one this is happening to, this hacker made over 8btc so far with this hack.
I bought the miner off of Amazon from HolyScott computers, although I swear when I ordered it it was from Centrix and was advertised as fully refurbished including a new image flashed to the SD card. I also updated it to the CG miner 4.8 myself from the Bit Main site.
Yes, I immediately tracked down this scumbag using block explorer and he or she has so far gotten a pretty good haul using this one address. It's pretty pissy but I think I've gotten enough tips from the good people here to right the ship. Man, I freaking hate thieves and liars.
@kano
I'd also suggest you contact not-so-nice-hash immediately and get them to block the address
That's a good idea and I'm going to do it.
14wsz2DGdQWLBgf63PXc14gboLFVgFyQ13@omega015
how are you currently accessing the miner? is it on your local network or remote somewhere?
I access the miner by plugging it into my router and then going to its address on the LCD screen of the miner through my browser. I cannot open my router for some reason.
Try this website to see if your router is open to either port 80 or 22 (SSH)
http://www.canyouseeme.org/ If it is, you need to get into your modem/router settings and close any port forward that's open.
In the mean time I also suggest disconnecting your internet (cable or dsl line but leave your modem/router switched (if its providing your IP address/wireless). Leave your laptop/pc connected as normal and the antminer. Then reset the antminer and using the default IP, login and first change the password to something else. Now you can setting it up how you want with your IP, pool settings etc.. and see if the problem returns.
EDIT: if the problem still persists after this then there is something dodgy on the miner itself that needs resolving in the software/firmware. BTW are you getting the firmware from bitmains website?
I've reset all those things while the s4 was connected and operating. However, I do need to go and do that offline. I didn't know it was possible. Thank you. I am getting the firmware from bitmain's website.
@kano
I appreciate that you stepped up as the pool operator. Now I know I made the right switch.
@generalt
In my research online I found a video on Youtube that mentions doing this and I am going to open this up tonight and reflash the image. Thank you.
Thank you for all of your help. I appreciate it a lot. It's very frustrating to have come into this problem. It alleviates a lot of the anguish when people more knowledgeable than myself will help me get back to hashing. I had to respond to everyone's replies in one post because I am new to the forum and there blockades in place that limit my ability to post. Thank you all again. I will update after I have tried everything suggested.
Erik