Block Erupter Prisma (>=1.4 T/device, 0.75-0.78 W/G, <1 BTC/T, October Shipping)

[mrpark]

I was told you can use BTC Guild with the controller: That's really the one I plan to use...

BTCGuild stratum address.

Code:

stratum-lb-usa48.btcguild.com

[daddyfatsax]

I was told you can use BTC Guild with the controller: That's really the one I plan to use...

BTCGuild stratum address.

Code:

stratum-lb-usa48.btcguild.com

That is correct, make sure you use the address you have listed. stratum.btcguild.com will not work on the tube/prisma.

[dogie]

3) Dogie's guide depends on Friedcat replying.
1) Technical support (at least from me) depends on Friedcat replying.

Looks like he took a long rest so his emails will come soon.

[mrpark]

Thanks, no rush on updating, just some suggestions. thanks for the replies... Maybe I can see how it works myself and post my findings.

3) Dogie's guide depends on Friedcat replying.
1) Technical support (at least from me) depends on Friedcat replying.

Looks like he took a long rest so his emails will come soon.

[praeluceo]

So if I have a full computer, with a couple of 12-port hubs, could I feasibly run 24 of these from one server with one instance of cgminer or bfgminer without issue? Or is there more to the 4-device limit that I'm missing here?

[Furio]

So in the post they state a few ways to ask for details, yet when I contact Phasebird, I have to copy paste my request to the email adres, mmmmmmmmmmmmkay never mind then.......

[wegrzyn6]

Hello!
Do Prisma are wires for connecting RPI?
What I need is a feed of connectivities RPI of Prisma?
What I need a usb adapter to connect to the Prisma?

[naituida]

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

[yslyung]

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

spunds VERY good but a step by step for noobs ?

TIA

[vortexz]

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

can I use this with any mining pool ? like nicehash ?

[naituida]

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

can I use this with any mining pool ? like nicehash ?

Yes. cgminer is handling all the stratum part.

[vortexz]

awesome !

[vortexz]

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

spunds VERY good but a step by step for noobs ?

TIA

My prismas will come in 1 week or so, so I would really appreciate a full guide too !
Thanks !

[sdjernes]

ASICMINER has released their branch of cgminer:   https://github.com/blockerupter/cgminer

This branch supports both Tube and Prisma, you'll need AM's USB adapter to connect to your USB port. A random CP2102X usb to uart adapter might work as well if you can customize the adpater by adding a pull resistor to the TXD.

How to build:

• ./autogen.sh
• ./configure --enable-blockerupter
• make

There's also a win32 binary here:
https://mega.co.nz/#!NY1FQbqB!4HFdFED73LbtrdNLU9ixJ-3asjmI1jhwc-7Qik9_x3w

How to run:
No extra command line parameters are needed. The Tube or Prisma will be identified as "BET" in cgminer.

Code:

./cgminer -o YOUR_POOL -u WORKER -p PASSWORD

Y

With this release I will start the build process this weekend to get a CubieTruck A20 image made.

A few points:

1. The initial release will be a pretty generic Cubian with the AM cgminer installed.
2. This will be put up under the CoinMineBoss site when out.

Round 2 build will be:

1. MinePeon UI with basic functionality.
2. Update the above.

[vortexz]

anyone got tracking number ? they told me on 7 oct that I will have a tracking number in 2-3 days, they still haven't replied, starting to get a little worried here.

[xhomerx10]

I'm only speculating here but access to Hong Kong from Shenzhen might be restricted right now.

[dogie]

I'm only speculating here but access to Hong Kong from Shenzhen might be restricted right now.

.... Absolutely 0 chance of that [regarding the protests].

[vortexz]

so what is going on then ?
I hope they didn't turn into scam now !

[xhomerx10]

Maybe it's this?

"Dear sir,

 Emma here for help.
 So sorry to make you feel inconvenience. The main reason of DHL delay is not the China National Holiday, is the HK Customs.
 The truth is that numerous packages which all merchants handed over to DHL forwarder were stucked in Hk custom waiting to be released and all will be postponed to reach the HK DHL house . This is why DHL service people said there is no package of yours when you called them.Such severe situation was caused by 2 smuggling cases which happened recently here and both were also published on HK custom web page. Government also involves in and investigations are still on the go.

 More information can be found as follows：
http://www.customs.gov.hk/en/publica...x_id_1220.html
http://www.customs.gov.hk/en/publica...x_id_1223.html

 I have seen your message yesterday and asked relevant staff contact with DHL and custom for further information. I will let you know when i get any news. I will apply refund you the DHL shipping charge for this delay compensation.

 Thank you
 sincere
 Emma"

 ...although one would think Asicminer would have still been able to inform its customers if this was the reason.

[mikep2012]

so are they giving tracking numbers or not?
cause i got nothing.