CCminer(SP-MOD) Modded GPU kernels.

[Slava_K]

I have on Alexis78 705MH (sp 695) on skein... Noescrypt 1.050MH (sp 0.400)... x17 14MH (sp 10.5). 1080Strix (1930 core 10200 mem).

[sp_]

On the gtx 1070 I get 590 with the sp-mod and only 540 on the same clocks with the alexis miner(high oc).

500@90 watt with proper settings.(mem -500, core oc +150, tdp 55%)

Neoscrypt is broken. With the 1.5.80 windows build you should get 1100 on the gtx 1080
x17 is 5% faster than 1.5.80 (May 2016) More can be done here.

[TR8888]

After owning many many 280x's for years, Ive gone and got my first nvid rig, 5 x 1070.. I feel like a noob again

I'll be floating around here asking noobish questions, I've just read the last 10 pages of this thread.. Good work sp_

[Amph]

-i 26 seems to give the best hash/w ratio but 50% tdp is still the most interesting.

Yes. Nice find.

so best results with

Voltage  +20%
Intesity -i 26
tdp 50%
memclock -500

coreclock oc'ed.

+150 core clock yes , of course to find the best settings i would have to test over a much longer period of time, but it should be close

that +20mv is the key here, it's equal to running at 60% the core, in fact is above 1800, but of course you get lower wattage if you put 50%/+20mv instead of 60% PL

can you try without the +20mv and tell em the core, i want to know if we have the same one, i have 1720 without the 20mv

Yes that's about right, each 10% bring you about 25mhz, but above 20% at this tdp it doesn't give you more, so you can expect getting 0% Vcore 1720-30 / ~1740-50 10% / 1760-70 20%, dunno if this behavior is card dependent though, i seem to get different result than others with my OC's (EVGA FTW 1070)

it's strange i tried +20% voltage on the core with msi but the core stay at 17xx with 50% power limit, i'm using 4.3.0 version of msi

[bensam1231]

Voltage is locked on ALL 1XXX series cards (it's perma locked on all 9XX series cards as well). You can't increase voltage, the slider doesn't do anything. Only way to increase it is with bios mods and even then sometimes it's hardcoded directly into the cards.

The only way to influence voltage is with the TDP slider. You wont ever be able to hit more then what it's set at at the factory TDP just increases power delivery to the card (the voltage will still be maxed) at higher then 100%. That aside, trying to increase voltage while decreasing TDP doesn't even make sense as one is decreasing voltage while the other attempts to increase it.

[tbearhere]

Hashrates fluctate.

If you spread your rigs on the 3 coins below you should have gotten around 0.004BTC for 1 GHASH in the last  24hours.

($2,24) (bitcoin is $1000 today)

live from yiimp:

All that work to exchange them for BTC. I don't know why Epsylon3 doesn't make his pool like zpool. We're going to do it anyhow. And I would be mining there at his yiimp pool more.

[Epsylon3]

you can auto sell if you want, but with your exchange accounts The problem is .. its hard to handle both modes and i dont want this auto-sell system involved with my yiimp instance

[bensam1231]

Hashrates fluctate.

If you spread your rigs on the 3 coins below you should have gotten around 0.004BTC for 1 GHASH in the last  24hours.

($2,24) (bitcoin is $1000 today)

live from yiimp:

All that work to exchange them for BTC. I don't know why Epsylon3 doesn't make his pool like zpool. We're going to do it anyhow. And I would be mining there at his yiimp pool more.

Yup, especially when you need to juggle more coins. It's not worth the effort, especially when things can get saturated really easily and you need some sort of automated bacekend to handle the coin juggling (basically what YAAMP is).

[grrrgrrr]

Hashrates fluctate.

If you spread your rigs on the 3 coins below you should have gotten around 0.004BTC for 1 GHASH in the last  24hours.

($2,24) (bitcoin is $1000 today)

live from yiimp:

Those coins are consistently 25~35% below expectation

[sp_]

Those coins are consistently 25~35% below expectation

Zpool reports 0.048BTC/GHASH in the last 24 hours. if you subtract the 20% (bug or fee). You end up a bit higher than on one of the coins on yiimp. I think this is because zpool is switching between the most profitable coin. Zpool also have 5 coins in total and not 3. I would like to do this on yiimp too. Is it possible? (mine with 3 wallets and one worker)  

[Epsylon3]

you can use --max-diff in ccminer

[bensam1231]

Those coins are consistently 25~35% below expectation

Zpool reports 0.048BTC/GHASH in the last 24 hours. if you subtract the 20% (bug or fee). You end up a bit higher than on one of the coins on yiimp. I think this is because zpool is switching between the most profitable coin. Zpool also have 5 coins in total and not 3. I would like to do this on yiimp too. Is it possible? (mine with 3 wallets and one worker)  

Yup, no idea how you're supposed to mine one algo with multiple coin outputs on yiimp... talked about that before.

[sp_]

you can use --max-diff in ccminer

You need to make a bat file like this:

:loop
ccminer -a skein -u <myriad address> (...) --maxdiff xxxx
ccminer -a skein -u <Aurora address> (...) --maxdiff yyyy
ccminer -a skein -u <digibyte address> (...) --maxdiff zzzz
ccminer -a skein -u <myriad address> (...) --maxdiff xxxx
ccminer -a skein -u <Aurora address> (...) --maxdiff yyyy
ccminer -a skein -u <digibyte address> (...) --maxdiff zzzz
ccminer -a skein -u <myriad address> (...) --maxdiff xxxx
ccminer -a skein -u <Aurora address> (...) --maxdiff yyyy
ccminer -a skein -u <digibyte address> (...) --maxdiff zzzz
ccminer -a skein -u <myriad address> (...) --maxdiff xxxx
ccminer -a skein -u <Aurora address> (...) --maxdiff yyyy
ccminer -a skein -u <digibyte address> (...) --maxdiff zzzz

ccminer -a LBRY -u <LBRY address> (...) --timelimit 60 (Failover mining. 1 hour on LBRY (if all the diff's are too high))
goto loop

Find good values for xxxx yyyy and zzzz, and the miner will skip to the next coin if the diff is too high. (payout is low). Or just mine on zpool.ca with 20-30% fee.

http://coinmarketcap.com/currencies/auroracoin/ (3.84BTC 24h volume)
http://coinmarketcap.com/currencies/digibyte/ (20.09 BTC 24H volume)
http://coinmarketcap.com/currencies/myriad/ (1.67 BTC 24h volume)

failover:

http://coinmarketcap.com/currencies/library-credit/ (13.00 BTC 24h volume)

[Amph]

at the moment is just better to mine monero than doing all that stuff

[jonesskill]

Where i can see the numbers 1070-1080 mining monero with this miner?

[_javi_]

at the moment is just better to mine monero than doing all that stuff

500 h/s for a 1070 doesnt seem the most profitable...

[Amph]

at the moment is just better to mine monero than doing all that stuff

500 h/s for a 1070 doesnt seem the most profitable...

yeah you need the sp mod which does 900hash, but i can do 700 with the open source one

[sp_]

at the moment is just better to mine monero than doing all that stuff

500 h/s for a 1070 doesnt seem the most profitable...

yeah you need the sp mod which does 900hash, but i can do 700 with the open source one

I think I will sell it to nicehash without the sourcecode, locked to BTC payouts. And then I will release a free version under a different name with  a 15% fee, that can be used on other pools  . Or I will just continue to grow my farm and keep the kernel private. With ethereum gone, the profit of mining will tank...

Prerelease results monero Hashrates sp-mod #2 pascal (2-jan-2017)

gtx 1060 3gb: 550h/s
gtx 1060: 600h/s
gtx 1070: 900h/s

[m1n1ngP4d4w4n]

at the moment is just better to mine monero than doing all that stuff

500 h/s for a 1070 doesnt seem the most profitable...

yeah you need the sp mod which does 900hash, but i can do 700 with the open source one

I think I will sell it to nicehash without the sourcecode, locked to BTC payouts. And then I will release a free version under a different name with  a 15% fee, that can be used on other pools  . Or I will just continue to grow my farm and keep the kernel private. With ethereum gone, the profit of mining will tank...

Prerelease results monero Hashrates sp-mod #2 pascal (2-jan-2017)

gtx 1060 3gb: 550h/s
gtx 1060: 600h/s
gtx 1070: 900h/s

15% fee

with the opening of nicehash source, you may not have alot of time before another miner come out with similar hashing. You may want to release it with a decent fee :p

[sp_]

The panda miner is coming.

Here is Jim Jefferies view on the panda:

https://www.youtube.com/watch?v=LZJ-_OTvsqo

 

Panda joke starting @ 8:39