CCminer(SP-MOD) Modded GPU kernels.

[bensam1231]

Low power usage is usually a sign that the algo isn't very well optimized.

say it to xmr miner developers )))

That is almost exclusively memory, same with Ethereum. Lyra2Z is not. :DDD

[sp_]

zcoin dev posted a public ccminer with fix for rates poolside problem

I have also fixed the poolside problem now.

[zorvalth]

guys, did somebody compare the bitcore profit from calcs and pools? No matter the miner on both suprnova i yiimp i got massive difference like 40%. On all other algos i\m always between 0 and 10-15% difference tops...

[Dr_Victor]

guys, did somebody compare the bitcore profit from calcs and pools? No matter the miner on both suprnova i yiimp i got massive difference like 40%. On all other algos i\m always between 0 and 10-15% difference tops...

I have compared - everything is ok for me.

[pallas]

Low power usage is usually a sign that the algo isn't very well optimized.

say it to xmr miner developers )))

That is almost exclusively memory, same with Ethereum. Lyra2Z is not. :DDD

lyra2z uses a bigger table, hence why it uses gpu ram unlike lyra2rev[12]

[wacko]

guys, did somebody compare the bitcore profit from calcs and pools? No matter the miner on both suprnova i yiimp i got massive difference like 40%. On all other algos i\m always between 0 and 10-15% difference tops...

For the past 24 hours I've got ~ 33% less btx than calcs promise. But the day before that it was ~ 10% less. Mining on yiimp.eu. I don't know, maybe the calcs are wrong on this one, maybe the diff was jumping a lot (althouth I don't see it going much above 10k for the last few days).

[candyiman]

guys, did somebody compare the bitcore profit from calcs and pools? No matter the miner on both suprnova i yiimp i got massive difference like 40%. On all other algos i\m always between 0 and 10-15% difference tops...

For the past 24 hours I've got ~ 33% less btx than calcs promise. But the day before that it was ~ 10% less. Mining on yiimp.eu. I don't know, maybe the calcs are wrong on this one, maybe the diff was jumping a lot (althouth I don't see it going much above 10k for the last few days).

im mining on miningpoolhub   but it has often invalid shares yet miner is solid

[stevascha]

interesting kernel dev 

[sp_]

1070ti 2250 2275 Can go higher with more oc...

[zorvalth]

guys, did somebody compare the bitcore profit from calcs and pools? No matter the miner on both suprnova i yiimp i got massive difference like 40%. On all other algos i\m always between 0 and 10-15% difference tops...

For the past 24 hours I've got ~ 33% less btx than calcs promise. But the day before that it was ~ 10% less. Mining on yiimp.eu. I don't know, maybe the calcs are wrong on this one, maybe the diff was jumping a lot (althouth I don't see it going much above 10k for the last few days).

WTM uses last 24h average diff, so if yo compare it with your profit for the last day should be pretty correct.

[sp_]

1070ti 2250 2275 2350 Can go higher with more oc...

[sp_]

with my 1080ti's doing 3300 easy, i wont worry about this SP_mod unless a 1070ti does 2500-2700, no point for me otherwise.

What are your clocks to reach 2300?. My mod can do 2350-2400 now, but I have the cheapest 1070ti card with a "reference" cooler so I guess 2500 is possible with the more expensive 1070ti cards.

[sp_]

I think the main thing that will hurt sp_ and his buyers of this mod is stale shares. sp_ isn't good in optimizing miner <=> pool communications.

I have improved the pool communication in sp-mod #1 optimized for the miningpoolhub pool.

sp-mod is currently testing with 1410.190 valid shares. 0 invalid...

[abudfv2008]

tpruvot's release seems to have lower rates poolside than in the miner window.

zcoin dev posted a public ccminer with fix for rates poolside problem
with this public ccminer (correct pool rates) :
1060 6gb (micron) (70% tdp): 1200 kH/s
1080ti 11gb (70% tdp): 3260 kH/s

will test on 70ti this week end ..

For lyra2z it doesn't matter what memory on board. That's why it is one of the best for top GPU's, just like skunk. 1080 is exactly 2 times faster than 1060/6Gb

[Dr_Victor]

I think the main thing that will hurt sp_ and his buyers of this mod is stale shares. sp_ isn't good in optimizing miner <=> pool communications.

I have improved the pool communication in sp-mod #1 optimized for the miningpoolhub pool.

sp-mod is currently testing with 1410.190 valid shares. 0 invalid... (550 MHASH)

According to the picture you have at least 260 gtx 1070 working.

[rednoW]

There is an omen - if sp_ starts to get interest to some coin - time to leave. The coin will sink ))

[bensam1231]

zcoin dev posted a public ccminer with fix for rates poolside problem

I have also fixed the poolside problem now.

There is a faster miner out there somewhere. I can find references to it, but I can't actually find it. It does 2200 on a 1070. No idea where it is. If it can be found it would give a bigger headstart on your revision.

guys, did somebody compare the bitcore profit from calcs and pools? No matter the miner on both suprnova i yiimp i got massive difference like 40%. On all other algos i\m always between 0 and 10-15% difference tops...

It's always been off by about 30%. I haven't said anything because it keeps people off other algos and keeps hash artificially inflated on BTX. Too many people depend on calculators and most never look at actual profits they're making. XD

[Frank White]

How do i donate/buy the spmod xzc optimized lyra miner.. Ill pay w/e u ask. Thank you SP

[halker2010]

guys, did somebody compare the bitcore profit from calcs and pools? No matter the miner on both suprnova i yiimp i got massive difference like 40%. On all other algos i\m always between 0 and 10-15% difference tops...

For the past 24 hours I've got ~ 33% less btx than calcs promise. But the day before that it was ~ 10% less. Mining on yiimp.eu. I don't know, maybe the calcs are wrong on this one, maybe the diff was jumping a lot (althouth I don't see it going much above 10k for the last few days).

WTM uses last 24h average diff, so if yo compare it with your profit for the last day should be pretty correct.

wait right now is it more profitable to mine btx or zcoin with 1070 because i get around 20-30 cents more on each 1070 and it seems btx profibility is off the chart in whattomine.

[omshree]

Sp-mod 4 not showing stats in AM, is there any solution for this?