Zerovert - First Truly & Only Anonymous Coin with Zerocoin | Mandatory Upgrade !

[TheCoinFinder]

We really need to get this coin on another *decent* exchange. C-Cex's wallet for ZeroVert is down *again* and this time for quite a while.

[nonny12]

If you do some zerocoin minting, wait for it to confirm, then close the wallet, there's always errors when you reopen the wallet daemon (64-bit Windows). Sometimes it says my wallet.dat is corrupt, other times it says that the database is corrupt and needs to be rebuilt. Do you need screenshots of this, Poramin?

[valsens]

every time i am open the new wallet says : " corrupted block database detected.do you want to rebuild the block database now? " i press ok and start reindex every time ,how i solve this without reindex every time

[cnerd]

one month now and there are still a gazillion wallet bugs
good job

[illodin]

Has anyone received twitter giveaways yet?

[valsens]

any answer??? because of that error  i cant receive all coins that i mine (yesterday nothing)

[fonyo]

Hi guys, I am trying to export my private key but code -4. The new wallet did not start.

Private key for address xxxxxxxxx is not known (code -4)

Could you please help me?
Thank you

Here's the guide I created for this:

http://www.reddit.com/r/ZeroVert/comments/2ni1sn/how_to_update_your_zerovert_wallet_from_0871_to/

[MisO69]

Abandoned?

Looks like a scam or just FUD spreading trolls?

I can't sync the new wallet. Stuck on block 3728.

[odaxis]

I think that Vertcoin's fork takes much time now.
But I didn't see any announces of ZVTC coming fork and new wallets here.

[nonny12]

I think that Vertcoin's fork takes much time now.
But I didn't see any announces of ZVTC coming fork and new wallets here.

ZER must get a new wallet to work with the new network, right?

[odaxis]

I think that Vertcoin's fork takes much time now.
But I didn't see any announces of ZVTC coming fork and new wallets here.

ZER must get a new wallet to work with the new network, right?

yeap.

[zeustiao]

Sounds good, hopefully it will be open source from release, or at least have a solid roadmap to when it will be open source.

[Gazzatron]

Help.....

Using version 0.8.7.1 I dumped my private key and, on another machine, loaded version 0.8.7.2 then fully sync'ed. From the console did an import private key and my old wallet address appeared along with the new wallet address, but not the coins. Deleted all but the wallet.dat and re-sync'ed, still no coins. Can I send the coins from the old wallet to the new wallet as I even tried using the old wallet.dat but the new version failed to load.

Help......

[pseudonymdude]

Help.....

Using version 0.8.7.1 I dumped my private key and, on another machine, loaded version 0.8.7.2 then fully sync'ed. From the console did an import private key and my old wallet address appeared along with the new wallet address, but not the coins. Deleted all but the wallet.dat and re-sync'ed, still no coins. Can I send the coins from the old wallet to the new wallet as I even tried using the old wallet.dat but the new version failed to load.

Help......

Hi,

I think I can help you.

The old wallet.dat can only be used in 0.8.7.1.  Do the exact same thing you did before.  Start up 0.8.7.2 without a wallet.dat in your roaming/zerovert folder.  Let it fully sync.  Then, importprivkey yourprivkey in the console.

If your coins don't show up:

edit: Step 0: Close currently running qt
1. Windows key+r
2. Type cmd
3. Hit enter
4. C:/restofpathwayto/zerovert-qt.exe -rescan (ie. if you put the folder in your C: drive C:/Zerovert/zerovert-qt.exe -rescan)
edit: 5. Hit enter

That fixed it, right?

[Gazzatron]

Help.....

Using version 0.8.7.1 I dumped my private key and, on another machine, loaded version 0.8.7.2 then fully sync'ed. From the console did an import private key and my old wallet address appeared along with the new wallet address, but not the coins. Deleted all but the wallet.dat and re-sync'ed, still no coins. Can I send the coins from the old wallet to the new wallet as I even tried using the old wallet.dat but the new version failed to load.

Help......

Hi,

I think I can help you.

The old wallet.dat can only be used in 0.8.7.1.  Do the exact same thing you did before.  Start up 0.8.7.2 without a wallet.dat in your roaming/zerovert folder.  Let it fully sync.  Then, importprivkey yourprivkey in the console.

If your coins don't show up:

edit: Step 0: Close currently running qt
1. Windows key+r
2. Type cmd
3. Hit enter
4. C:/restofpathwayto/zerovert-qt.exe -rescan (ie. if you put the folder in your C: drive C:/Zerovert/zerovert-qt.exe -rescan)
edit: 5. Hit enter

That fixed it, right?

Did'nt work, I tried several times getting the same error on startup:

EXCEPTION: St12out_of_range
vector::_M_range_check
C:\Program Files (x86)\Zerovert\zerovert-qt.exe in Runaway exception

The old wallet still syncs up to the latest block, why can't I just send them to the new wallet address?

[replicator]

Did'nt work, I tried several times getting the same error on startup:

EXCEPTION: St12out_of_range
vector::_M_range_check
C:\Program Files (x86)\Zerovert\zerovert-qt.exe in Runaway exception

The old wallet still syncs up to the latest block, why can't I just send them to the new wallet address?

I had a similar problem, don't remember the error message though. I erased the Zerovert directory in "Roaming" completely, then ran the new wallet.

[pseudonymdude]

Help.....

Using version 0.8.7.1 I dumped my private key and, on another machine, loaded version 0.8.7.2 then fully sync'ed. From the console did an import private key and my old wallet address appeared along with the new wallet address, but not the coins. Deleted all but the wallet.dat and re-sync'ed, still no coins. Can I send the coins from the old wallet to the new wallet as I even tried using the old wallet.dat but the new version failed to load.

Help......

Hi,

I think I can help you.

The old wallet.dat can only be used in 0.8.7.1.  Do the exact same thing you did before.  Start up 0.8.7.2 without a wallet.dat in your roaming/zerovert folder.  Let it fully sync.  Then, importprivkey yourprivkey in the console.

If your coins don't show up:

edit: Step 0: Close currently running qt
1. Windows key+r
2. Type cmd
3. Hit enter
4. C:/restofpathwayto/zerovert-qt.exe -rescan (ie. if you put the folder in your C: drive C:/Zerovert/zerovert-qt.exe -rescan)
edit: 5. Hit enter

That fixed it, right?

Did'nt work, I tried several times getting the same error on startup:

EXCEPTION: St12out_of_range
vector::_M_range_check
C:\Program Files (x86)\Zerovert\zerovert-qt.exe in Runaway exception

The old wallet still syncs up to the latest block, why can't I just send them to the new wallet address?

New wallet address is the same as the old wallet address.  Your coins are safe.  You just aren't able to access them.  Trying to send them to another address will create more headaches and makes no sense.

Try this again and it should be easier since you did it once already:

Step 1: Back up everything in case it doesn't work.
Step 2: Throw out roaming folder.
Step 3: Move the Zerovert folder you launch with (that contains zerovert-qt.exe - the 0.8.7.2 version) to your C: drive.
Step 4: Sync up 0.8.7.2 wallet
Step 5: Go to console and do the importprivkey yourprivkey thing
Step 6: Close running qt
Step 7: Windows key+r
Step 8: Type cmd
Step 9: Hit enter
Step 10: Type the following in command console:
                  C:\Zerovert\zerovert-qt.exe -rescan
Step 11: Hit enter
(Try to do steps 7-11 before another block is mined.  (Meaning, you want to be synced while doing 7-11.  That's up to 10 minutes so it shouldn't be difficult; just don't take a break after you close the qt.)

edit: Also, you have to make sure the program is closed before starting it again through windows or command console.  Otherwise, you'll get an error.  You can click that little arrow near the bottom right to see if it's still running.

edited this a few times for clarity

If you follow that exactly and it doesn't work, what OS are you using?

[Gazzatron]

I've tried on both Vista64 and Windows7 x64 and both accepted the old wallet address but fail to reveal the coins and gave the same error doing a rescan. I have restored the 8.7.1 wallet and sent the coins to my 8.7.2 wallet successfully. My 8.7.2 wallet still has the old wallet address, is there a way of removing it ?

By the way thanks for trying to help.

[pseudonymdude]

I've tried on both Vista64 and Windows7 x64 and both accepted the old wallet address but fail to reveal the coins and gave the same error doing a rescan. I have restored the 8.7.1 wallet and sent the coins to my 8.7.2 wallet successfully. My 8.7.2 wallet still has the old wallet address, is there a way of removing it ?

By the way thanks for trying to help.

Huh.  Surprised that worked.  I thought they would be on different forks.

There's no real reason to remove it.  The way I'd remove it is by dumping and importing the private keys I wanted to keep, but that might not work for you.

[Gazzatron]

Both wallets sync'ed up to the same block. I sent 0.1 coin first to check and when it arrived and confirmed in the 8.7.2 wallet, I sent the rest at a cost 0.02 fees. Could have saved myself hours if I tried this after the first failure...

****Anyone else trying this method, send a small amount first*****