ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH

[scrawford84]

I own a metal fab shop, would anyone be interested in either galvanized, aluminum or stainless covers for their S5s? Cardboard is a really bad idea.

I'd be interested, what kind of price do you think ballpark?

Not sure, I need to get my hands on the dimensions. I'd likely use galvanized to keep the price as low as possible. Looks like I'd need to knock out 6 holes per capping with the water jet, 4 PCI-e and 2 data ribbons. I might try to get my hands on a dead or cheap S5 locally to get proper measurements.

It would be 4 holes for the pci-e, and 8 holes for the screws since I imagine you would use the same mounting location. The ribbons would not need to be outside the cover.

[soy]

Best option in my opinion is s3 case 

Ah, but would the cover PCIE connections ports line up?

[soy]

I own a metal fab shop, would anyone be interested in either galvanized, aluminum or stainless covers for their S5s? Cardboard is a really bad idea.

So, you'd be capable of fabricating water cooled sinks for S3's and S5's?

[freemind1]

Currently how much is the waiting time for delivery of S5 in European countries? More than 2 months? Can someone give me an approximate date please?

[Truman]

Currently how much is the waiting time for delivery of S5 in European countries? More than 2 months? Can someone give me an approximate date please?

No, if you order right now not more than 5 days.

[Prelude]

I own a metal fab shop, would anyone be interested in either galvanized, aluminum or stainless covers for their S5s? Cardboard is a really bad idea.

I'd be interested, what kind of price do you think ballpark?

Not sure, I need to get my hands on the dimensions. I'd likely use galvanized to keep the price as low as possible. Looks like I'd need to knock out 6 holes per capping with the water jet, 4 PCI-e and 2 data ribbons. I might try to get my hands on a dead or cheap S5 locally to get proper measurements.

It would be 4 holes for the pci-e, and 8 holes for the screws since I imagine you would use the same mounting location. The ribbons would not need to be outside the cover.

Ah OK, thouhgt I'd need holes for the ribbons. Good to know. I really need to get my hand on an S5.

I own a metal fab shop, would anyone be interested in either galvanized, aluminum or stainless covers for their S5s? Cardboard is a really bad idea.

So, you'd be capable of fabricating water cooled sinks for S3's and S5's?

Yes, shouldn't be a problem.

I've also had someone request a full S5 case, ala S3. Going to look into that too when I find an S5.

[dogie]

i received my s5 but after an hour of hashing, one of the hashboard shows 30 "-" (dashes). tried powering up one board and its the same

What is the exact make and model of the PSU you're using? Tried hard restarts [turn off at the PSU]? If that's still not working, you can try plugging that blade into the other port on the controller. Let us know.

[smit1237]

Best option in my opinion is s3 case 

Ah, but would the cover PCIE connections ports line up?

No, but this is not a problem

[scyth33]

i received my s5 but after an hour of hashing, one of the hashboard shows 30 "-" (dashes). tried powering up one board and its the same

What is the exact make and model of the PSU you're using? Tried hard restarts [turn off at the PSU]? If that's still not working, you can try plugging that blade into the other port on the controller. Let us know.

using a dell poweredge 2100w psu. tried the other ports and still the same. the led is not lit on the hashboard.

after letting the miner turn on for some time, ~2-5mins, the problem board would start to hash. not sure what went wrong but it was not like that when i first powered the miner.

any idea if i can send just the hashboard back? would be too expensive if i send the entire miner

edit: i might have found the solution. but i am not able to understand Russian. could someone please translate for me? here's the link https://bitcointalk.org/index.php?topic=950408.0;all

and

Пpoблeмa peшeнa. Bce paбoтaeт Smiley
U27 4VK4 вылeтeлa (LN1134), кинyли c U30 пpoвoдoк c выxoдa и вce зapaбoтaлo. Кидaли пpoвoдoк c U24, peзyльтaтa нe былo.

[aarons6]

i received my s5 but after an hour of hashing, one of the hashboard shows 30 "-" (dashes). tried powering up one board and its the same

What is the exact make and model of the PSU you're using? Tried hard restarts [turn off at the PSU]? If that's still not working, you can try plugging that blade into the other port on the controller. Let us know.

using a dell poweredge 2100w psu. tried the other ports and still the same. the led is not lit on the hashboard.

after letting the miner turn on for some time, ~2-5mins, the problem board would start to hash. not sure what went wrong but it was not like that when i first powered the miner.

any idea if i can send just the hashboard back? would be too expensive if i send the entire miner

edit: i might have found the solution. but i am not able to understand Russian. could someone please translate for me? here's the link https://bitcointalk.org/index.php?topic=950408.0;all

and

Пpoблeмa peшeнa. Bce paбoтaeт Smiley
U27 4VK4 вылeтeлa (LN1134), кинyли c U30 пpoвoдoк c выxoдa и вce зapaбoтaлo. Кидaли пpoвoдoк c U24, peзyльтaтa нe былo.

are you sure you didnt accidentally plug the pcie in the wrong way.. the 2 should be facing opposite directions.
i know they are keyed, but if you are persistent you can put them in backwards.

[scyth33]

i received my s5 but after an hour of hashing, one of the hashboard shows 30 "-" (dashes). tried powering up one board and its the same

What is the exact make and model of the PSU you're using? Tried hard restarts [turn off at the PSU]? If that's still not working, you can try plugging that blade into the other port on the controller. Let us know.

using a dell poweredge 2100w psu. tried the other ports and still the same. the led is not lit on the hashboard.

after letting the miner turn on for some time, ~2-5mins, the problem board would start to hash. not sure what went wrong but it was not like that when i first powered the miner.

any idea if i can send just the hashboard back? would be too expensive if i send the entire miner

edit: i might have found the solution. but i am not able to understand Russian. could someone please translate for me? here's the link https://bitcointalk.org/index.php?topic=950408.0;all

and

Пpoблeмa peшeнa. Bce paбoтaeт Smiley
U27 4VK4 вылeтeлa (LN1134), кинyли c U30 пpoвoдoк c выxoдa и вce зapaбoтaлo. Кидaли пpoвoдoк c U24, peзyльтaтa нe былo.

are you sure you didnt accidentally plug the pcie in the wrong way.. the 2 should be facing opposite directions.
i know they are keyed, but if you are persistent you can put them in backwards.

Nope. I'm very sure i plugged in the right way

was looking through the kernel log and found this

Code:

[   33.701934] FPGA detect asic addr err
[   33.701934] 
[   33.707311] 
[   33.707311] 
[   33.707311] !!!!Restart1 detect asic addr!!!
[   33.707311] 
[   33.716429] clear FPGA nonce buffer
[   33.720721] get chain2 reg0x0
[   33.723829] send BC data:
[   33.723829] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11 
[   33.830195] chain2 total asic:0
[   33.833498] total chain_num{1}
[   33.836699] FPGA detect asic addr err
[   33.836699] 
[   33.842078] 
[   33.842078] 
[   33.842078] !!!!Restart2 detect asic addr!!!
[   33.842078] 
[   33.851176] clear FPGA nonce buffer
[   33.854977] get chain2 reg0x0
[   33.858088] send BC data:
[   33.858088] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11 
[   33.964967] chain2 total asic:0
[   33.968272] total chain_num{1}
[   33.971469] FPGA detect asic addr err
[   33.971469] 
[   33.976850] 
[   33.976850] 
[   33.976850] !!!!Restart3 detect asic addr!!!
[   33.976850] 
[   33.985941] clear FPGA nonce buffer
[   33.989742] get chain2 reg0x0
[   33.992846] send BC data:
[   33.992846] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11 
[   34.099765] chain2 total asic:0
[   34.103091] total chain_num{1}
[   34.106288] FPGA detect asic addr err
[   34.106288] 
[   34.111798] S5 board
[   34.114101] 
[   34.114101] 
[   34.114101] !!!!soft set defult asic num 0!!!
...
[   36.683826] gDiff_nonce_num{0}gNonce_Err{0}
[   36.688196] gSubmit_nonce_num{0}
[   36.691576] chain0 asic00 ret nonce_num{0}
[   36.695858] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[   36.701325] dev->temp_out_ctrl{1}
[   38.154552] asic cmd return 1b80e000
[   38.158335] chain2 reg crc_r{0xd}crc{0x0} Err ret{0x1b80e000}
[   38.164359] asic cmd return 1b800b02
[   38.168101] chain2 reg crc_r{0x1f}crc{0x0} Err ret{0x1b800b02}
[   38.174196] asic cmd return 1b800b02
[   38.177934] chain2 reg crc_r{0x1f}crc{0x0} Err ret{0x1b800b02}
[   38.184029] asic cmd return 1b800b02
[   38.187775] chain2 reg crc_r{0x1f}crc{0x0} Err ret{0x1b800b02}
[   38.193875] asic cmd return 1b800b02
[   38.197621] chain2 reg crc_r{0x1f}crc{0x0} Err ret{0x1b800b02}
[   38.203988] asic cmd return 1b800b02

[nokati]

hi,

I try to get the S5 on water colling.

Can someone please check the dimminsion of the boards for me so I can find a water cooling heatsink for it.

this one is for avalon II, but maybe it can fit.

304mm*138.5mm*26mm

http://www.alibaba.com/product-detail/miner-BTC-watercooling-kits-full-cover_60200516120.html

Thanks!

[coinits]

Miner Porn

[dunand]

hi,

I try to get the S5 on water colling.

Can someone please check the dimminsion of the boards for me so I can find a water cooling heatsink for it.

this one is for avalon II, but maybe it can fit.

304mm*138.5mm*26mm

http://www.alibaba.com/product-detail/miner-BTC-watercooling-kits-full-cover_60200516120.html

Thanks!

http://shop.syscooling.com/goods.php?id=47

Look at this thread
https://bitcointalk.org/index.php?topic=929437.0

[MissouriMiner]

Miner Porn

 

[soy]

i received my s5 but after an hour of hashing, one of the hashboard shows 30 "-" (dashes). tried powering up one board and its the same

What is the exact make and model of the PSU you're using? Tried hard restarts [turn off at the PSU]? If that's still not working, you can try plugging that blade into the other port on the controller. Let us know.

using a dell poweredge 2100w psu. tried the other ports and still the same. the led is not lit on the hashboard.

after letting the miner turn on for some time, ~2-5mins, the problem board would start to hash. not sure what went wrong but it was not like that when i first powered the miner.

any idea if i can send just the hashboard back? would be too expensive if i send the entire miner

edit: i might have found the solution. but i am not able to understand Russian. could someone please translate for me? here's the link https://bitcointalk.org/index.php?topic=950408.0;all

and

Пpoблeмa peшeнa. Bce paбoтaeт Smiley
U27 4VK4 вылeтeлa (LN1134), кинyли c U30 пpoвoдoк c выxoдa и вce зapaбoтaлo. Кидaли пpoвoдoк c U24, peзyльтaтa нe былo.

are you sure you didnt accidentally plug the pcie in the wrong way.. the 2 should be facing opposite directions.
i know they are keyed, but if you are persistent you can put them in backwards.

I noticed the PCIE hashboard connecters are a slightly lower tolerance quality than in C1 or previous.

[coinits]

Miner Porn

 

Making a profit?

[smit1237]

i received my s5 but after an hour of hashing, one of the hashboard shows 30 "-" (dashes). tried powering up one board and its the same

What is the exact make and model of the PSU you're using? Tried hard restarts [turn off at the PSU]? If that's still not working, you can try plugging that blade into the other port on the controller. Let us know.

Пpoблeмa peшeнa. Bce paбoтaeт Smiley
U27 4VK4 вылeтeлa (LN1134), кинyли c U30 пpoвoдoк c выxoдa и вce зapaбoтaлo. Кидaли пpoвoдoк c U24, peзyльтaтa нe былo.

They mean LN1134 dead,  bridge u30 out to... i dont know where.

[bgibso01]

Miner Porn

Funny, I wonder how many of those little wire shelf setups have been sold to miners.  I've got 3 myself.

[soy]

Those are available in chrome at Walmart.  I've been using a less expensive 4 shelf white cart found in the laundry section going for ~$12.59.  Caveat, they don't mention those work best when a small cable tie is used to fasten each shelf to a cross bar.  Otherwise it's a no screw fit together deal.  So cheap I've been using one per miner and supplies.  Thinking of putting two miners and supplies on each to exploit window access better.