aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2016, 07:49:49 AM |
|
My seasonic X-850 decided to melt the wires on my s5.. this is actually the 2nd time its done this.. :/ im really not a fan of modular power supplies ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) i put an old corsair non modular 750 on it for now.. thankfully all it did was shut off.. the psu still works.. i guess ill throw it in my server and let it have an easy life till it dies.. if bitmain would have used 8 pin plugs instead of 6 pin plugs i dont think it would have had this issue Never had this happen to me with any EVGA PSU. Maybe the connectors or the gauge is too smalls. Are you using 1 cable per each 4 socket? I really dont see how this would happen unless that unit is faulty. yeah 1 wire per.. perhaps the s5 is using more power then it should, but the first time the wire melted it was on a s3, at that time i was using 1 wire per blade. I'm not saying that this happened here, but I will say that in general, people need to check their connections. When you go through connecting cables, slow down and really make sure they are inserted. Some folks slap 'em in and they don't make great contact. Do it twice if you need too, but do it slow. (That's what she said ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ) it could be but this psu has been plugged into this s5 pretty much untouched since april.
|
|
|
|
VirosaGITS
Legendary
Offline
Activity: 1302
Merit: 1068
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2016, 08:05:06 AM |
|
yeah 1 wire per.. perhaps the s5 is using more power then it should, but the first time the wire melted it was on a s3, at that time i was using 1 wire per blade.
If you plugged 6 there should not be any problem, even low quality connectors should be fine, since 125 watts per is not much. Maybe the unit does not have over volt protection. *Shrug*
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2016, 08:10:18 AM |
|
yeah 1 wire per.. perhaps the s5 is using more power then it should, but the first time the wire melted it was on a s3, at that time i was using 1 wire per blade.
If you plugged 6 there should not be any problem, even low quality connectors should be fine, since 125 watts per is not much. Maybe the unit does not have over volt protection. *Shrug* yeah who knows.. its a seasonic.. supposed to be one of the top of the line power supplies.. anyway, i put it in my webserver thats running the ip camera network. it has an easy life now.. it only has to power 1 hard drive and an old amd x2 cpu that is 45w..
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2016, 09:45:38 PM |
|
My seasonic X-850 decided to melt the wires on my s5.. this is actually the 2nd time its done this.. :/ im really not a fan of modular power supplies ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1588%2F24527248606_f99906f037_k.jpg&t=665&c=MS7bQlGPYrQTsg) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1487%2F24257889080_340283f5f9_k.jpg&t=665&c=0pW_B-QkeJs5sA) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm2.staticflickr.com%2F1527%2F24553429085_abac11ebb5_k.jpg&t=665&c=myZLdXDERdRssQ) i put an old corsair non modular 750 on it for now.. thankfully all it did was shut off.. the psu still works.. i guess ill throw it in my server and let it have an easy life till it dies.. if bitmain would have used 8 pin plugs instead of 6 pin plugs i dont think it would have had this issue When used properly, it is actually hard to wreck one of these power supplies. They have a great 5 year warranty and I wish more electronics were built like these.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2016, 06:09:23 AM |
|
My seasonic X-850 decided to melt the wires on my s5.. this is actually the 2nd time its done this.. :/ im really not a fan of modular power supplies ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) (removed pics to save space) i put an old corsair non modular 750 on it for now.. thankfully all it did was shut off.. the psu still works.. i guess ill throw it in my server and let it have an easy life till it dies.. if bitmain would have used 8 pin plugs instead of 6 pin plugs i dont think it would have had this issue When used properly, it is actually hard to wreck one of these power supplies. They have a great 5 year warranty and I wish more electronics were built like these. And I would not say all modular are bad I have some "high" quality modular, which really seasonic should be. But I like it allows me to plug in cables I need and others I leave in the box no need to have mess of cables hanging around. But in all reality server PSU's have taken over on a lot of mining. I'm not sure when I will need another PSU again but likely will be server when I do.
|
|
|
|
|
dorvader
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2016, 02:34:41 AM |
|
I have several s5 antminer with a problem
if you turn off and on, they reset to factory alone.
other with harware version 0.0.0.0 and 0 hashrate
and other with only 1 hashboard mining... the other hashboard is off...
|
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2016, 06:40:39 AM |
|
I actually prefer immersion cooling. Sticking your miners in a clean fish tank, wiring it all up, then filling the tank with mineral oil. Then pumping that oil to a cooling method, a simple pump and radiator with a fan, pumping the mineral oil through a water cooled heat exchanger, or one of these days, I'll try GeoThermal cooling to go along with my solar and wind power.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 24, 2016, 08:24:20 PM |
|
I finally decided to upgrade my S3+ to an S5 because I found one used for about what I paid for my S3+ used. I only run 1 machine at home due to electricity costs, and new hardware is just too expensive for me to justify buying for a hobby.
Question: I've scanned through several threads but cannot find a simple, definitive answer to "the best" fan(s) to use. I want it to be quieter than the 70db stock fan, but I want it to stay cool, too (about 25*C ambient). Could anyone recommend me a fan or push/pull fan combo to use? Thanks.
|
|
|
|
leowonderful
Legendary
Offline
Activity: 1624
Merit: 1129
Bitcoin FTW!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 24, 2016, 10:16:03 PM |
|
I finally decided to upgrade my S3+ to an S5 because I found one used for about what I paid for my S3+ used. I only run 1 machine at home due to electricity costs, and new hardware is just too expensive for me to justify buying for a hobby.
Question: I've scanned through several threads but cannot find a simple, definitive answer to "the best" fan(s) to use. I want it to be quieter than the 70db stock fan, but I want it to stay cool, too (about 25*C ambient). Could anyone recommend me a fan or push/pull fan combo to use? Thanks.
If noise is not a BIG issue, then try these. http://www.centrix-intl.com/details.asp?Parent2ID=1&productid=13257&gclid=Cj0KEQiAxrW2BRCFidKbqKyq1YEBEiQAnMDWxqwAlFvsRE32V0jYyad3sjzCFVa1jWH8zmjNMEpnlRsaAi1Z8P8HAQI use this on my single S5 and it's comparable to the S7 fan. Very similar design but EXTREMEMEMELY good cooling. Centrix makes really good fans, generally. Great for the price and a really high rpm PWM fan for the price. To compare, most pwms at 20$ only go up to ~2000. This goes to 4500.
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2016, 08:00:39 AM |
|
Does anyone want a S5? My electric costs are about equal to earnings, making it hard to continue... Whats it worth?
|
|
|
|
VirosaGITS
Legendary
Offline
Activity: 1302
Merit: 1068
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2016, 08:04:20 AM |
|
Does anyone want a S5? My electric costs are about equal to earnings, making it hard to continue... Whats it worth?
Anywhere from 75$ to 200$ i guess? Its hard to say, people arent even buying one well priced because the difficulty went so up. I'd probably buy one if really cheap, but would also sell one in the upper end.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2016, 08:04:38 AM |
|
Does anyone want a S5? My electric costs are about equal to earnings, making it hard to continue... Whats it worth?
if you are in usa check craigslist.. in my home town they are still going for over 400$
|
|
|
|
adaseb
Legendary
Offline
Activity: 3836
Merit: 1727
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2016, 08:04:54 AM |
|
I finally decided to upgrade my S3+ to an S5 because I found one used for about what I paid for my S3+ used. I only run 1 machine at home due to electricity costs, and new hardware is just too expensive for me to justify buying for a hobby.
Question: I've scanned through several threads but cannot find a simple, definitive answer to "the best" fan(s) to use. I want it to be quieter than the 70db stock fan, but I want it to stay cool, too (about 25*C ambient). Could anyone recommend me a fan or push/pull fan combo to use? Thanks.
Put your S3 fans in your S5, it will be quieter Does anyone want a S5? My electric costs are about equal to earnings, making it hard to continue... Whats it worth?
People stopped buying miners and are buying GPUs instead.
|
|
|
|
KeezAZA
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 224
Merit: 100
https://eloncity.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2016, 05:58:14 PM |
|
Is there a way to keep the ATX power supply running after AC power is restored? I have a Raidmax 1000w ATX PSU. I have done the paper clip mod, but after a power failure i have to remove the clip and put it back. My Zapper Gold 750w is using a paper clip too and is not phased by power interruptions.
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2016, 06:05:51 PM |
|
My SeaSonic start's right up after power restore. I actually use the breaker box to power-off/on my S5's, and have had no issues over the past year. I power-down during the high-rate price time, and back on when the rate goes back down.
|
|
|
|
VRobb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2016, 11:59:27 PM |
|
I finally decided to upgrade my S3+ to an S5 because I found one used for about what I paid for my S3+ used. I only run 1 machine at home due to electricity costs, and new hardware is just too expensive for me to justify buying for a hobby.
Question: I've scanned through several threads but cannot find a simple, definitive answer to "the best" fan(s) to use. I want it to be quieter than the 70db stock fan, but I want it to stay cool, too (about 25*C ambient). Could anyone recommend me a fan or push/pull fan combo to use? Thanks.
I used a pair of Noctua iPPC 3000rpm pwm fans in push/pull. I set the fan control at 80% (with slight OC for extra hash goodness) and it kept @60c or lower. MUCH quieter than the stock fan, but that's not saying much, is it??
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2016, 01:39:53 AM |
|
I finally decided to upgrade my S3+ to an S5 because I found one used for about what I paid for my S3+ used. I only run 1 machine at home due to electricity costs, and new hardware is just too expensive for me to justify buying for a hobby.
Question: I've scanned through several threads but cannot find a simple, definitive answer to "the best" fan(s) to use. I want it to be quieter than the 70db stock fan, but I want it to stay cool, too (about 25*C ambient). Could anyone recommend me a fan or push/pull fan combo to use? Thanks.
I used a pair of Noctua iPPC 3000rpm pwm fans in push/pull. I set the fan control at 80% (with slight OC for extra hash goodness) and it kept @60c or lower. MUCH quieter than the stock fan, but that's not saying much, is it?? Not really stock is hot and loud. That is just what a stock S5 is, for better or worse. Even the best modded S5 I still don't think will touch under clocked Avalon 4.1. That is the most quiet modern miner I think out there. And I have played with a lot of different miners. (No not including like stick miners in this, just big full size miners).
|
|
|
|
CarrollFilms
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 156
Merit: 100
Can I eat a Bitcoin?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 27, 2016, 12:35:54 AM |
|
Does anyone want a S5? My electric costs are about equal to earnings, making it hard to continue... Whats it worth?
If you're willing to work out a price, I'll gladly buy it off of you. PM me if you're still selling.
|
Back in my day Bitcoin used to cost $69
|
|
|
talks_cheep
Legendary
Offline
Activity: 1036
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 27, 2016, 03:30:32 AM |
|
Is there a way to keep the ATX power supply running after AC power is restored? I have a Raidmax 1000w ATX PSU. I have done the paper clip mod, but after a power failure i have to remove the clip and put it back. My Zapper Gold 750w is using a paper clip too and is not phased by power interruptions.
Your Raidmax is a piece of junk psu, in fact it has no right to call itself a psu. I wouldn't put that sh*t in any of my computer builds.
|
|
|
|
|