[ANN] CRAVE 1st POS Masternodes | Dark Assets | I2P | Market =Embrace The Dark=

[Hyperjacked]

When masternodes are rolled out, masternode owners will get a percentage of the 1 CRAVE pos, correct?  If so, what will that percentage be?  And how many Crave will be needed to run a masternode?

Thanks.

Read the thread ICM said minimum 500 crave for cravenodes...you can have your own market for large qty's !

I'm in the process of reading the thread.  But as a community, you should never tell people, "Read the thread" even if the same annoying question is asked over and over again.  Good "customer service" helps build a strong, mature community.

Masternodes have to be profitable to run.  I want to do the math to see at what point they'd be profitable with only 1 Crave per block.  But to do that, I need the variables I asked for.

I apologize sir! I was in the middle of something and cam across rude...ICM explains it better than me is all!

[MickGhee]

Theres only 520k coins , we are below $100k coinmarketcap , trolls have arrived to buy cheap coin,lol, noobs cant understand how cheap this coin is just now because they so used to ipo or premines when a coin launches with them its instant $250k coinmarketcap and works its way down....this pump hasnt evan began yet

fucking a

[MickGhee]

When masternodes are rolled out, masternode owners will get a percentage of the 1 CRAVE pos, correct?  If so, what will that percentage be?  And how many Crave will be needed to run a masternode?

Thanks.

no the plan is to have a percentage charged to users who wish to use a hyper node  that fee goes to the masternode which processed it plus the 1 crave  i hope that explains it better

[parkranger455]

i like this coin but problem at the moment is it is being pumped. someone put up a 21btc wall at 79k sats so i can only assume he has put up buy walls to sell his stash. i may well be wrong but if im right i know i can get in much cheaper than now

[Everething]

Any news from Poloniex?

@Poloniex, at your earliest convenience would be most excellent

[industrialcoinmagic]

DarkPool daemon available at:

https://github.com/industrialcoinmagic/darkpoold

It is Python, and connects with RPC to crave-qt or craved.  Use --burn command to burn CRAVE for BLUR.

Can use --help command to see available calls.

Run an instance as server:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword server

Then you can run commands like:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword burn --source craveaddresstoburncoinsfrom --quantity #ofcrave

I am looking at modifying Boottle which is a client web wallet that you run local and has easy button to turn darkpoold server on and off.  Right now is command line only.

Burn period runs for ~30 days from block 17000.

[mitchr4]

DarkPool daemon available at:

https://github.com/industrialcoinmagic/darkpoold

It is Python, and connects with RPC to crave-qt or craved.  Use --burn command to burn CRAVE for BLUR.

Can use --help command to see available calls.

Run an instance as server:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword server

Then you can run commands like:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword burn --source craveaddresstoburncoinsfrom --quantity #ofcrave

I am looking at modifying Boottle which is a client web wallet that you run local and has easy button to turn darkpoold server on and off.  Right now is command line only.

Burn period runs for ~30 days from block 17000.

Dev, you every work on other projects? Or a history in cryptography?

You got your shit together better than any other coin I've seen...

[proletariat]

DarkPool daemon available at:

https://github.com/industrialcoinmagic/darkpoold

It is Python, and connects with RPC to crave-qt or craved.  Use --burn command to burn CRAVE for BLUR.

Can use --help command to see available calls.

Run an instance as server:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword server

Then you can run commands like:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword burn --source craveaddresstoburncoinsfrom --quantity #ofcrave

I am looking at modifying Boottle which is a client web wallet that you run local and has easy button to turn darkpoold server on and off.  Right now is command line only.

Burn period runs for ~30 days from block 17000.

Dev, you every work on other projects? Or a history in cryptography?

You got your shit together better than any other coin I've seen...

Some say he is Satoshi on crack.

[nokat]

UNSPENDABLE_MAINNET = 'Bs8Haw3nAsWf5hmLfKzc6PMEzcxUGSYjxf'
yes that is a burn address. since the hex is 1B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
i can trust that. but people who are new might not trust it.

you could have made a proper burn address like BurnBurnBurnBurnBurnBurnBurnEku2FS


Great job anyway!
Looks good

[igor107th]

lol

[cryptocrap]

UNSPENDABLE_MAINNET = 'Bs8Haw3nAsWf5hmLfKzc6PMEzcxUGSYjxf'
yes that is a burn address. since the hex is 1B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
i can trust that. but people who are new might not trust it.

you could have made a proper burn address like BurnBurnBurnBurnBurnBurnBurnEku2FS


Great job anyway!
Looks good

OMG , THIS IS SO AMAZING. 

[industrialcoinmagic]

UNSPENDABLE_MAINNET = 'Bs8Haw3nAsWf5hmLfKzc6PMEzcxUGSYjxf'
yes that is a burn address. since the hex is 1B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
i can trust that. but people who are new might not trust it.

you could have made a proper burn address like BurnBurnBurnBurnBurnBurnBurnEku2FS


Great job anyway!
Looks good

BurnBurnBurnwhatever is not "proper"   This is "proper". 

[nokat]

UNSPENDABLE_MAINNET = 'Bs8Haw3nAsWf5hmLfKzc6PMEzcxUGSYjxf'
yes that is a burn address. since the hex is 1B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
i can trust that. but people who are new might not trust it.

you could have made a proper burn address like BurnBurnBurnBurnBurnBurnBurnEku2FS


Great job anyway!
Looks good

BurnBurnBurnwhatever is not "proper"   This is "proper". 

well BurnBurnBurnBurnBurnBurnBurnEku2FS is made the same way counterparty and dogeparty made their burn address.
it is more proffesional. since anyone who looks at it even once would know that no one can have the private key for that.
they one you used, they have to actually find the hex of it using a base58 calculator to see if its a burn address or not.
 

[sologap]

DarkPool daemon available at:

https://github.com/industrialcoinmagic/darkpoold

It is Python, and connects with RPC to crave-qt or craved.  Use --burn command to burn CRAVE for BLUR.

Can use --help command to see available calls.

Run an instance as server:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword server

Then you can run commands like:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword burn --source craveaddresstoburncoinsfrom --quantity #ofcrave

I am looking at modifying Boottle which is a client web wallet that you run local and has easy button to turn darkpoold server on and off.  Right now is command line only.

Burn period runs for ~30 days from block 17000.

the best dev, thanks

[ocminer]

Can someone give me a hint why I would burn my CRAVE for BLUR ?

[sologap]

Can someone give me a hint why I would burn my CRAVE for BLUR ?

it is same as BTC to XCP

[Kimowa]

DarkPool daemon available at:

https://github.com/industrialcoinmagic/darkpoold

It is Python, and connects with RPC to crave-qt or craved.  Use --burn command to burn CRAVE for BLUR.

Can use --help command to see available calls.

Run an instance as server:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword server

Then you can run commands like:
./darkpoold.py --backend-rpc-password=craverpcpassword --backend-rpc-user=craverpcuser --rpc-password=darkpooldpassword burn --source craveaddresstoburncoinsfrom --quantity #ofcrave

I am looking at modifying Boottle which is a client web wallet that you run local and has easy button to turn darkpoold server on and off.  Right now is command line only.

Burn period runs for ~30 days from block 17000.

Everyone congratulate dev, keep community positive he does amazing work for us all. Thanks dev i love the work you are doing.

[goblynn]

so can somebody explain to me what this BLUR is..and why i would burn Crave for it?

[goblynn]

Can someone give me a hint why I would burn my CRAVE for BLUR ?

ahah oops...happened before i hint send

[Kimowa]

Can someone give me a hint why I would burn my CRAVE for BLUR ?

for anonymous coloured coins and use adrenaline node and other he list on main page