good, then u saving bitcoins, & replying my post will make u 40, only 10 less for 50

Hi, dacoinminster, ur script is working fine, & my small tip 1btc to u(i can only give that much now)
Thanks.

I too tried with Extra flag -b in GUI & also in cmd, both unable to connect & removed -b & its working fine.
Don't know how to make miner to know new block came.

Can u please explain me from my above post?
Did you saying to disable what i marked in red?
Thanks.

Hi, i am ready
30 for 33, u know my paypal, send 30PPUSD, i send 33BTC, to same address or different address, PM.

bobR, actually WE are increasing the difficulty in mining.

Its very easy, if there is only 10 people & 100 plates of food.
But its very DIFFICULT, if there is only 100 plates of food, but 10000 people trying to get it.

Bitcoinpool.com is a very new pool miner & only few people mine there. I mine there every day to get some bitcoins & give some support.
I feel, they are some what unlucky for not getting many users to mine in their pool.

In gpu miner in Extra flags u can enter -v -w128 -f1.....
But with 8800GTS u cant expect much. no CUDA, its seems worst than my 9400GT in mining.
If u r adventures, try overclocking with MSI Afterburner.
Increase core clk until system freezes then reduce 10MHZ &  fix with it.
Also REDUCE mem clk while mining & watch where u get max & where u get minimum hashing. At max hash fix it.
Reducing mem clk reduces TEMP, so u can run fan slower, if u want & i prefer 100% fan, don't want to fire my card by mistake.

I really don't understand what this post saying.
I have HD6870 & mining mostly with -v-w128 -f 1-15(anything depends other pgms)



You saying the red circle in the picture.
I always see other programs respond slow when i am mining at -f1,
Watching videos avi, mkv,youtube....gets slower, so i change -f1 to f15 or more.
After i change that, i see my hash rates goes down by some 20-30 depending on the video i see & when i listen music, i dont have to change -f1, winamp plays well.
VlC version is 1.1.7.

But i never saw CORE Mhz dropping. How should it drop?
Once i start system, my core & mem clk goes to default (900 & 1050) & i open MSI afterburner which increases core to what i set, but mem clocks dont get lower auto, so i reduce to max low, close afterburner & open again & now mem clk shows last set max low in middle & i further low it to 370. thats it. whether i mine or not, watching videos or not, until another reboot, i don't see any core or mem clk change.

Ah, now i got it, its due to catalyst control center which is installed by default. which has overdrive which changes it.
Please uninstall catalyst control center, if u dont feel needed.
I only installed ATI display driver, APP 2.3 or 2.4, vc++ & ATI catalyst install manager.
removed catalyst control center, WMV9/VC-1, AVIVO, Hydra, amd drag & drop, application profile.

I see no difference in running my system with the above only installed.
Hope this helps & can tip me also, if u feel

I see a bug or problem using ur script on google chrome.
It doesn't save the check boxes. save given by slush has no use.
Every time i closes google chrome completely & open chrome, every thing is back to NO SCRIPT page, then have to change Time offset, & check the check boxes needed again.
Please make it save the changes. I used google chrome 10.0.648.134 version.

Kiv a request.

Is it possible to add a timer to know how many shares were mined for an hour.
fixed 1 hour or custom-able timer , its ur choice according to code & knowledge.
It will be very useful to know how many shares mined per hour, as yesterday it took me a hell lot to remember & mark it on paper.
Some servers mine more shares, some mines less & also -w128, w256, gives different no. of shares.
Since in GUI, many things are possible at least a fixed one hour timer to measure no. of accepted shares will be nice addiction.
Thanks.

I have only one GPU, i mean only one card, HD6870 in my pc

I found this site & the software it gives. Trojan, virus free & also free for non commercial purpose.
Since we all mining with electricity & i thought this may help to reduce some.
I just downloaded & using it for few hours & see no difference.

https://grano.la/software/how_it_works.php

U can try & please give feedback.

I also found another software which is given away free, says it can encrypt empty folder & we can drag & drop files by giving password.
Installed, but not tried.
Grab when its free.
Also virus,trojan free.


http://www.tipradar.com/download-cryptainer-le-free-encryption-software.html


Feedbacks & bitcoins are always welcome.

check this.
http://bitcointalk.org/index.php?topic=4493.0

Before, i got 20% usage, now zero, but others differ.
It may work for u. 11.4 & 2.4 BETA

I tried to see what difference in shares.
I ran both for 1 hour to mine deepbit in PPS & i got this.
-w128 = 232 shares.
-w256 = 221 shares.

11 shares less & no stale in both.

seems 128 mine more shares by reducing worksize.

mostly i use -v -w128 -f1.
I have quad coreQ8400 @ 2.66Ghz, windows 7 32 with aero enabled.
Before with 11.2 & 2.3 , if i run -f1 then even minimize & maximize was slower, now no lag.
HD6870 OC to 1047 core clk, 370 mem clk, fan 100% , temp is 65C-66C & getting 270 Mhash/s
I use GUI pocblm.
Its really strange why some gets 25% or less cpu usage & i get zero.

7 hours later,

Why w128, when the card handles w256 & also putting w256 gives around 7-10Mhash/s more?

Please some one explain, coz it confuses me a lot.
Thanks.

You all installed just sdk 2.4 or both 11.4 & sdk 2.4?

Coz, i Installed 11.4 ati display driver & sdk or app 2.4 & still seeing ZERO %



I tried with 2.2 & 2.1, but with 11.4 they cant recognize by windows or cards.
Seems its due to change in installation path or something.
coz 2.3 installs at C:\Program Files\AMD APP\bin\x86, while 2.2 & 2.1 installs at C:\Program Files\ATI Stream\bin\x86 .

I have to uninstall 11.4 & then try 10.12 or less to check 2.2 or 2.1
Coz, just uninstalling 2.4 from 11.4 & installing just sdk 2.1 & 2.2 & 2.3(not sure abt 2.3 coz forgot) from "http://download2-developer.amd.com/amd/Stream20GA/ati-stream-sdk-v2.1-vista-win7-32.exe" seems useless.

I do later & tell.
Besides you guys try with 11.4 if tried only 2.4

When clicking any link in stats page which shows solved blocks, http://bitcoinpool.com/block.php?block=112689
Gives error "Direct access to this location is not allowed."

How to logon to the site bitcoinpool.com with the user name & password, besides new user, there is no link to login to bitcoinpool.com.

I got less before & now i feel getting a little bit more.
& more over, i see the gpu usage is ranging from 85 -99% instead of straight 99% as before.
Also while my CPU TIME in task manager, for system idle process says 109:18:09, i think i am running system for 3-4 days without reboot.
But for the poclbm.exe it says cpu time 0.00.06 with 44,520K memory & guiminer.exe says cpu time 0.03.36 with memory 28,772K.
I am sure guiminer & poclbm is running for past one day without exit.
since, it says 600+176+4470 shares, so around 5000 shares. I run my card in many pools & keep on changing for testing & to get some more coins..
With my HD6870 i think at most i can get 250-300 shares per hour. 260-278 Mhash/s i got. & also some times to stop miners for installing & uninstalling sdk's.



I am not sure about 2.1 & 2.2. But i am sure it is slightly faster than 2.3 & more over it takes 0 cpu for pocblm & also less gpu usage.
So, something is there, & please test it to make sure.
I am new to mining & graphics stuff, programming.....only thing i know is 5970 has 3200 shaders & was fastest in mining.
But seems due to 11.4 & 2.4 may be 6990 with 3072 core (instead of 3200 in 5970) can beat 5970 in mining.



Thanks for the tip.

Hi,

I yesterday came across preview (beta) of next ati catalyst driver.
They call it 11.4 instead of 11.3(don't know why) & stream SDK, which was renamed to APP SDK 2.4 is also in that package.
I downloaded & tested & mining & found it reducing poclbm 25 or 50% usage to 0 even with/without -f1 & also it reduces gpu use from straight 99 to variable 92 - 99%
I have HD6870 & at 1038 core & 370 mem with 100% fan & 66C temp, i am getting 274-277 Mhash/s in windows 7 32 bit with aero.

I see some odd thing, many or i say all suggest to use -w128 while the max atleast 6870 supports is 256, so putting -w256 actually increases 2-6 Mhash/s.

U can find BETA of 11.4 & sdk 2.4 here.
http://support.amd.com/us/kbarticles/Pages/Catalyst114earlypreview.aspx

Just update without uninstall & select custom instead of express to not install useless things like hydra, eyinfinity...for mining.
I installed only these 3, Ati display driver, Ati catalyst install manager & APP SDK 2.4 & VC++ 2010.

Any ideas , feedback are welcome & also some 1 or 2 bitcoins.
I can't able to get more than 3-4 with my card daily.
Thanks.