Hi again Patrik I have some Win 11 Pro Rigs and on all of them the overclocking system doesn't work anymore after the new Win-Update. All hosts are connected, the "Test connection" works. AM can read all stats without any problem. But AM won't execute any Clocking Profile inside the Managed Miner Properties. If I try to manually set any clocks in the "GPU overclocking" tab, it says "Failed to update the following hosts: xyz". If I click again on apply, AM doesn't print the error again. It just looks like the new overclocks are set, but they aren't. I have no firewall or anything else set. In order to check, I have copied over an older version of the 9.10.8 Remote Agent, but the problem remains. Then I switched to an older Win 11 backup from last month. And everything works fine as usually. Because I also updated AM from an older version to the newest 9.12.5, I really can't tell if it's a problem of the newest AM version, or just Windows 11. But the backup works, even with the newest AM version, so I think its something in Windows. No Windows 10 rig seems affected right now, only Win 11. The systembuilds: Doesn't work Windows 11 Pro, 23H2 22631.3235 Backup which works Windows 11 Pro, 23H2 22631.3155 Can you please check that? Thanks for your report - I will investigate. Can you please open services.msc and check if "IntelliBreeze Maintenance Service" is running correctly?
|
|
|
Hi Patrik, can you add please: Pyrin (PYI) and Nicehash Karlsen (KLS) Thanks Thanks for the feedback. I've pushed an update for this and your Awesome Miner should pick it up during the day.
|
|
|
Awesome Miner version 9.12.5
ASIC mining - DesiweMiner supported with reboot and default pools - Antminer T21 and E9 Pro supported - IceRiver integration improved Mining software - BzMiner 19.3.1 - Lolminer 1.84 - OneZeroMiner 1.3.0 - SrbMiner-Multi 2.4.7 - TeamRedMiner 0.10.18 Corrections - Correction to hash rate display for iPollo G1 - Correction to reading MAC address from Antminer L7 running the Awesome Miner firmware
|
|
|
Thanks,
I thought I looked over every single menu, But I missed that one.
It reports in Celsius is there any way to toggle to display in Fahrenheit
Today we only support temperature display in Celsius. The reason is that Celsius is being used by all ASIC miners and GPU mining software. However, I agree that the outside temperature may be easier to relate to in F so we might make this configurable in the future.
|
|
|
Hello Patrike,
Just stopped in to say hello to everyone and ask 1 question.
1st off, I really like your Awesome miner software, It really is Awesome! After 3-4 years of HiveOS, you have a new convert, me.
Question- Outside Temperature
Temperature, I searched and saw many of posts on GPU/ASIC temperatures.
On the dashboard there is a feature for Outside Temperature but I could not find any way to set up any API links or URL's.
How do you set that up, just thought it would be convenient? not a big deal.
Thanks for your feedback and question. Please go to the Awesome Miner Options dialog, Dashboard & History section. You can configure the outside temperature here, by entering your latitude and longitude.
|
|
|
Awesome Miner version 9.12.4
Version 9.12.4 ASIC mining - Initial monitoring support for Antminer S21 Mining software - BzMiner 19.3.0 - Nanominer 3.8.12 - OneZeroMiner 1.2.9 - Rigel 1.14.2 - TeamBlackMiner 2.17 - TeamRedMiner 0.10.17 - SrbMiner-Multi 2.4.6 Corrections - Correction to Awesome Miner Antminer firmware profile changess when running with immersion cooling - Correction to Profit Profile bulk updates for GPU clocking profiles - Correction to miner group search
|
|
|
I made some more tests. The problem is miniz Miner with version 2.2c it doesn´t work. With 2.1c it is working with your commandline.
Good point. Previously I was testing with 2.1c only and everything looked fine no matter how many times I tried to reproduce this issue. With 2.2c it isn't working no matter if I do --pers auto or --pers=auto. If I instead go to the Options dialog, Online Services, then edit the Nicehash Equihash 125,4 entry and change the Personalization from "auto" to "ZelProof", it's working fine. There is no need to manually adjust the command line parameters. This could be a workaround until the "auto" flag in Miniz is working again. hmm yeah now it works with ZelProof only, at the day i tested, AM only wrote zelproof instead of ZelProof doesnt matter what i wrote, but i restartet AM yesterday, maybe something was stuck. But i think it was a good point to show other that you can override parameters if you want and know how. can you add Abelian coin and the dual mining options for Teamredminer and Rigel. And glad to see back here patrike, i had a little fear because it was quite here for a while. I hope all is going well. Wish you the best for this year. The is a software definition update ready now, with a few updates based on your request. There will be a new version release now as well. Thanks and I also would like to wish you all the best!
|
|
|
I made some more tests. The problem is miniz Miner with version 2.2c it doesn´t work. With 2.1c it is working with your commandline.
Good point. Previously I was testing with 2.1c only and everything looked fine no matter how many times I tried to reproduce this issue. With 2.2c it isn't working no matter if I do --pers auto or --pers=auto. If I instead go to the Options dialog, Online Services, then edit the Nicehash Equihash 125,4 entry and change the Personalization from "auto" to "ZelProof", it's working fine. There is no need to manually adjust the command line parameters. This could be a workaround until the "auto" flag in Miniz is working again.
|
|
|
I will look into this for the next release.
|
|
|
Awesome Miner version 9.12.3
ASIC mining - Support for Marathon Antminer firmware Features - Expose additional properties for miners via the HTTP API Mining software - BzMiner 19.2.1 - Lolminer 1.82a - Nanominer 3.8.8 - OneZero Miner 1.2.8 - Rigel 1.12.2 - SrbMiner-Multi 2.4.5 - TeamBlackMiner 2.16 - TeamRedMiner 0.10.15 - WildRig 0.40.5 Corrections - Correction to pool personalization strings
|
|
|
Hi Patrike OneZeroMiner 1.2.8 Dynex mining together with Ziliqa, not show hashrate per card in GPU tab. AM ver. 9.12.2 Regards
Can you please send me an API report (toolbar: Tools -> API Report) for this scenario? You can send via PM. Thanks!
|
|
|
Goodnight. I've been looking for simple information for a few days now, but I can't find the answer anywhere on the internet. Unfortunately this is very sad, as this information and much more should be found easily by users. I run the command " [{"command":"ascset", "parameter":"0,hashpower,1295"}] " in the program provided by canaan (FMS V2.3.5), so far everything is perfect. The problem is that when the Avalon 1066 Pro is turned off and on or restarted, it loses this setting. I tried to add several commands through cgminer in the additional commands option, but without success. My problem is simple: how do I insert this command permanently on the equipment? or any command that has the same function that I can use in awesome?
Does anyone know how to enable ssh on the Avalon 1066 Pro?
thanks
I don't know if there are any ways of persisting this setting on the Avalon ASIC. However, Awesome Miner can send these kind of commands to your Avalons. To automate things you can use Awesome Miner to define a rule where you send this command to the Avalon miner once in case the condition Uptime < 10 minutes is true. This way, as soon as you restarted your Avalon miner Awesome Miner will once send this command to the miner. Awesome Miner Options dialog, Rules section: - Limit actions to run at most once every: 12 minutes - Trigger -- Mining uptime. Set 10 minutes, Less or equals - Action -- Miner command. Execute API commands. Command: ascset Parameters: 0,hashpower,1295
|
|
|
@Patrike hi boss, looks like Binance BTC price provider stucks. Since many days price not changed.
Regards
Is it different from what you see using this link? https://api.binance.us/api/v3/ticker/price?symbol=BTCBUSDI think their API is lagging a little bit at the moment, as it reports a bit lower value compared their web site and compared to everyone else.
|
|
|
@Patrike,
Can you take a look at ZelHash (Equihash 125,4) as some of the miners (LOLMiner / MiniZ) don't want to work on some pools for some reason.
I can't get them to work on Nicehash or Zpool within Awesome Miner, but if I run them manually from a bat file they work fine.
Looks like the --pers option is missing / set wrong for them.
TIA
** Update **
Tested this again, it's a --pers issue where "--pers" is not set correctly for the Zelhash (Equihash 125,4) algo.
I made a user defined online service for ZelHash for Nicehash to confirm this with the MiniZ Miner that this is the problem, results below with MiniZ now working.
Nicehash - Algo ->> ZelHash (Equihash 125,4) MiniZ needs "--pers=ZelProof"
Thanks for the report. I've looked into this and I think the solution will be to use "auto" for the personalization for this algorithm. I did notice that we need to make a change for Lolminer to work in this scenario as well. This will be updated in the next release.
|
|
|
Hi Patrike,
Can you add the following algo's for Zpool in the next update.
Blakecoin Curve (Curvehash) Mike Neoscrypt-xaya Sha3d Sha512256d Skydoge Whirlpool
Thanks.
Thanks for the feedback. We will add these.
|
|
|
Awesome Miner version 9.12.2
Awesome Miner Antminer firmware - Updated firmware mining profiles to support all new profiles in S19 firmware version 1.2.1-rc3 - Important: Some profiles has been removed or changed. Please review any Awesome Miner rules setting Antminer S19 firmware mining profiles to ensure the correct hash rate level is configured. ASIC mining - Improved IceRiver ASIC integration Features - Support active worker name variables for bulk edit Mining software - BzMiner 19.0.1 - Gminer 3.43 - Lolminer 1.81 - Rigel 1.10.1 - OneZero-Miner 1.2.7, including improved integration - SrbMiner-Multi 2.4.3 - TeamBlackMiner 2.15 - WildRig miner 0.39.9c Corrections - Corrections to Remote Proxy on recent versions of Raspberry Pi OS
|
|
|
Awesome Miner version 9.12.1
Awesome Miner Antminer firmware - Support for the latest firmware version (v1.2.1-rc3) - Add firmware support for Antminer S19k Pro and S19 XP Hydro Mining software - BzMiner 18.0 - CpuMiner-Opt 23.15 - Lolminer 1.78 - SrbMiner-Multi 2.4.2 - TeamBlackMiner 2.12 - WildRig Miner 0.39.8 Corrections - Correction to setting firmware mining profile via Awesome Miner - Correction to hash rate display with TT-Miner mining EGAZ - Correction to network scan with Auradine ASIC miners
|
|
|
Thanks for your report. I can see that it's current not in the main list from WhatToMine. For now, please add it manually via the Options dialog, Statistics Provider section, where you can fill in the following for "WhatToMine additional JSON URL": https://whattomine.com/coins/333.json
|
|
|
Awesome Miner version 9.12
ASIC mining - Added support for more Canaan Avalon ASIC miners - Added MAC address detection for Canaan Avalon and MicroBT Whatsminer Features - Introduce variables to include MAC addresses in worker names or miner descriptions Mining software - CpuMiner-Opt 23.14 - Gminer 3.42 - Lolminer 1.77b - Nanominer 3.8.6 - OneZeroMiner 1.2.6 - SrbMiner-Multi 2.4.1 - TeamBlackMiner 2.10 - TT-miner 2023.4.3 - WildRig 0.39.5 - XmRig 6.21.0 Corrections - Correction to display of correct result when setting default pools on Canaan Avalon ASIC miners - Correction to display of miner description in the miner list after being updated via the HTTP API
|
|
|
Awesome Miner version 9.10.9
Features - HTTP API for External Miners includes property to set the API connection to either enabled on disabled - Added more coin images Changes - Removed old pools Mining software - CpuMiner-Opt 23.7 - Lolminer 1.77a - Rigel 1.9.2 - TeamBlackMiner 2.08 - WildRig Miner 0.38.2 Corrections - Correction to MAC address display - Correction to Antminers running with ePic Blockchain controllers - Correction to SrbMiner-Multi integration with watchdog concept
|
|
|
|