Please go to the Options dialog, Balance section, Wallet balance. If you edit your Litecoin entry (or the one with a failure), select the first address in the list and click the Test button - is that working? Then move on to select the next and Test it. Are all working here?

Thanks for the feedback. Yes, this is a feature request I get from time to time and it will probably be something for the future. I agree that it would make sense to have.

Just to confirm, the coin is always visible but sometimes the statistics shows all zeros or similar? If that's the case, it doesn't sound like a problem in Awesome Miner itself. This coin isn't part of the main listing at the provider, and the reason might be because of this instability.

Awesome Miner version 8.0.1
 GPU mining
  - Improved output from Diagnostics
 Features
  - Heat map for display of temperatures and hashrates of miners. Heat maps can be created from a Miner Group in the Groups tab.
 Mining software
  - Miniz Miner 1.6v6
  - TeamRedMiner 0.7.10
  - SrbMiner Multi 0.5.1. This version is configured differently compared to older versions
  - Lolminer implementation updated to use algorithm parameter instead of coin parameter
 Corrections
  - Correction to Fan Speed trigger for ASIC miners
  - Correction to wallet balance total in case one of the wallets failed to update correctly

Hi Joseph,
Thanks for the additional details. At the moment, I'm not aware of any ways to set this "Core Voltage %". I hope it will run fine anyway using the properties that is supported via Awesome Miner. The Native Overclocking is generally smoother than using the MSI Afterburner integration.

Right now your mining software is launched and controlled by Ethos and you are using the External Miner concept in Awesome Miner to monitor the mining details.

In order to be in full control of the mining, you need to:
1) Install Awesome Miner Remote Agent on Linux
https://support.awesomeminer.com/support/solutions/articles/35000086210-remote-agent-for-linux
2) Instead of using an External Miner, you add your miner as a Managed Miner, where you can define mining software and mining pool to use. At this point, Awesome Miner will be responsible for launching and controlling the mining software.
https://support.awesomeminer.com/support/solutions/articles/35000085995-add-managed-miners-using-the-wizard

I don't have have experience with EthOS myself, but the concept above are the general steps to run Awesome Miner Remote Agent on Linux.

Can you please go to the Options dialog, Statistics Provider section and see if "Keep coins even when no longer listed by provider" is enabled? If not, please check it to make sure Awesome Miner keeps coins from being removed.

Hi Joseph and thanks for your question.

I'm not aware how to set Core Voltage (%) like MSI Afterburner. On nVidia 2000-series it isn't supported at all. On the 1000-series nVidia will enforce a number of limits the voltage anyway so you will never get 100% higher voltage even if configured. This is why the nVidia drivers mainly focus on the "Core voltage limit" these days.

What kind of voltage behaviors do you get when you set it to +100% compared to 0% in MSI Afterburner? How does that compare to setting a voltage limit in Awesome Miner instead (at keep the setting in MSI Afterburner at 0%)?

Thanks for the report.

I've identified the scenario. If you have multiple addresses and the check for one of them fail, the failure will not be indicated in the user interface. The last balance for the address will still be displayed, but no longer part of the total.

I will correct this in the next release, to indicate if there was a failure and let the total value assume the last known balance for the address that failed once. After this change, you will always see the total balance correctly.

Thanks for your question. "Interface offline" indicates one of the following:
1) The mining software you are running isn't responding with any monitoring information when requested by Awesome Miner. If this is the case, it's some bug in the mining software that cause the monitoring interface (API) to stop working
2) Awesome Miner do receive the monitoring information from the mining software, but Awesome Miner do something wrong and fail to process and display this information.

When this problem happens, can you please select the miner and send me the API report via PM? You can generate the API report via the toolbar: Tools -> API Report. With this API Report I can verify if the mining software is responding with any monitoring details. Thanks!

I can clearly see that you are running some pirate/hacked version of Awesome Miner that you didn't pay for.

1) Uninstall Awesome Miner and run an anti-virus check on your computer. Hopefully you don't have any viruses at this point
2) Remove your Awesome Miner configuration files. Remove all files in this folder: %appdata%\AwesomeMiner\
3) Download and install Awesome Miner from our web site:
https://www.awesomeminer.com/download
4) Sign up for a subscription on our web site:
https://www.awesomeminer.com/signup
5) Once you have a valid subscription, I'm more than happy to help you. At this point, please create the setup again with your Ethermine pool. If it isn't working correctly, please start the miner with the Diagnostics button and share the output with me via the contact form below:
https://www.awesomeminer.com/contact

Thanks!

I've updated the mining software definitions for Miniz and TeamRedMiner.

For SrbMiner, I've not yet updated because I need to review all changes - just like you pointed out.

Please try to put your wallet address in the field "Worker name" instead - leave the "Wallet address" field empty. It's a bit different from pool to pool if they expect the wallet to be provided as waller or worker.

Please go to the Options dialog, Managed Hosts section. I think you have some duplicates of the hosts here (either duplicate IPs, or a combination of hostnames and IP addresses that points to the same Remote Agent). Can you please review this list and make sure there are no duplicate, and once you ensure this, please restart Awesome Miner once. For mining processes that already are running and no longer listed as Mining in Awesome Miner - please stop them manually before you proceed.

If the above didn't resolve the problem, please also make sure you only have a single Awesome Miner instance running controlling your Remote Agents.

Please open the Properties for your mining pool. Update the URL to:
stratum+tcp://eu1.ethermine.org:4444

Thanks for the feedback. Using the algorithm-approach is probably the best way forward, as these are fully configurable for you as well. I will look into this.

Awesome Miner version 8.0

 Important:
   Awesome Miner and Remote Agent now requires Microsoft .NET Framework 4.7.2 or later.
   - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required.
   - For Windows 7, Windows 8 and older versions of Windows 10 and Windows Server, please download and install:
     https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer
 Awesome Miner Antminer firmware
  - Antminer firmware S17, S17+, T17, T17+ version 2.0.3 supported and released
  - The rule action to set Firmware mining profile has been improved to allow any mining profile property to be set
 ASIC mining
  - The operations to set Default Pools, Reboot, Change firmware and set web password have been redesigned to work on multiple kinds of ASIC miners
  - NOTE: If using Innosilicon, Avalon 10-series or Whatsminer, please open the Properties of the External Miner and select the correct ASIC hardware type. The miner credentials are also entered for the External Miner Properties or globally in the Options dialog, Mining Settings section.
  - Avalon 10-series ASIC integration improved with: Default Pools, LED on/off, Pause/Resume mining, Set network settings
  - Avalon ASIC support for latest firmware versions
  - Whatsminer ASIC integration improved with: Reboot, Restart, Default Pools, LED on/off, Pause/Resume mining, Change password, Firmware updates, Set network settings. Requires August 2020 firmware.
  - Antminer S19 improvements, including operations to pause (sleep) and resume mining
 GPU mining
  - Display of PCI Bus ID on the GPU tab
  - Display of GPU memory size and GPU memory manufacturer on the GPU tab
  - The GPU information dialog (View GPU Details) can also show information for Linux based systems
  - Detection of nVidia Cuda 10.2 and 11.0 to support selection of mining software with dependencies on recent Cuda versions
 Features
  - Miner groups: The miners in a group can be sorted by IP address
  - Miner groups: Display of ideal hashrate. Configurable in the Options dialog, General section
  - Miner groups: Display the number of hashing miners (miners with a non-zero hashrate). Configurable in the Options dialog, General section
  - Miner groups: Miners can be added to Virtual miner groups via the Miners tab, via the context menu, Group section
  - Miner groups: Virtual miner groups can be opened from the Groups tab - opened in Miners tab with a filter for the selected virtual miner group
  - Miner groups: Use colors to indicate if a miner group (on the group page) has one or more miners not hashing or not running at all
  - Filtering: Filtering of miners to only show miners with zero hashrate
  - Filtering: Improved miner list filtering where filtering can be applied on a number of properties. Configurable via the toolbar Find, Property filter.
  - Filtering: Improved miner list filtering by introducing profiles, where filters can be saved with a name and activated with a click
  - Filtering: The miner list indicates if a filter is active, including a button to clear all active filters
  - Information column: Display ASIC chip temperature
  - Information column: Display ASIC firmware version for more ASIC models
  - Add miner wizard: Network scan supports IP ranges to be entered like 192.168.0-2.100-199
  - Add miner wizard: External Miners can also be added with IP ranges, to add a large number of miners at once
  - For large mining operations where the concept of Global command queue is displayed, use right click to be display a context menu where the queue can be cleared
  - Export of all selected miners and their current status to CSV. The feature can be acccessed via the toolbar Tools -> Export -> Export to CSV
  - The dashboard will display Pool balance, Wallet balance and Exchange balance when the coin is Bitcoin
  - Mining history can store statistics in 1 hour intervals instead of 5 minutes, if configured
 Security
  - Permissions to access Virtual Groups can be assigned to user groups
  - Improvements when using multiple user accounts in the Windows application, where it's made possible to sign out and sign in with another account (via the Menu).
  - Configurable permission: Financial details, to define if revenue, profit, and balance should be displayed
  - Configurable permission: Manage user groups, to define if groups can be added, modified and removed
  - Configurable permission: Organize miners, to define if miners can be moved to other groups
  - When a user is assigned access to all miners, all virtual groups will also be included
 Integration
  - Added wallet balance support for ARRR and updated for KMD
  - Pool balance for F2pool
  - Zergpool regions configurable
 Configuration
  - The Total group in Groups tab can be hidden. Right click on the area of groups to show or hide this group. If hidden, the group will be hidden in the web interface as well.
  - Number of coins to show with exchange rate the status bar can be configured (from 0 - 20). The default is still to show 15 coins. Configurable in the Options dialog, Coins section.
  - Variables (to be used by rules) can be view and configured in the Properties of a miner
 User interface
  - Improved use of metric units for large hashrate and power usage
  - External Miner Properties organized to have the most common settings available in the General section while less common settings have been moved to the Advanced section
  - Summary tab for a miner has been reorganized to give a better overview
  - ASIC tools menu has been reorganized to match the improved support of ASIC miners for several of the operations
  - Rule action menu for ASIC related operations has been reorganized in a similar way
  - Operations performed via the ASIC tools menu with progress display will now list all miners with their configured ASIC hardware before any operation is performed
  - Added more coin images
 Web
  - The feature to move miners to a group is made available via the web interface
  - Web interface can redirect to a the requested page after signing in
  - Ideal hashrate and number of hashing miners is displayed on the Groups page in the web interface
 Changes
  - Adjusted timeout values for ASIC miner web requests
 Mining software
  - CryptoDredge 0.25.1
  - XmRig 6.3.3
  - GMiner 2.22
  - T-Rex 0.16.2
  - Nanominer 1.10.1
  - Lolminer 1.07
  - Bminer 16.3
  - Miniz 1.6v5
  - PhoenixMiner 5.1c
 Corrections
  - Correction to display of GPU PCI Bus ID when using automatic mapping to system monitoring
  - Correction to web dashboard circle graph
  - Correction to Mining Pool Hub pool balance
  - Correction to Remote Agent running on Fedora Linux with 7 digit process identifiers
  - Correction to reading of nVidia power usage on Linux
  - Correction to NbMiner Ethereum mining protocol for 2miners.com

Is it Windows that gives this error or what is the context? I'm not familiar with it and I cannot find an exact match for the message when searching online.

In the Managed Miner Properties, please go to the Command Line section and uncheck "Execute batch commands with Administrator privileges". Can you please verify if this works better?

Hello,
Can you please try if the following works better?
bash -c "sudo /root/utils/oc_dpm.sh 1800 1100 950"