Lots of interest, but nothing spoken for.
Make me a reasonable offer!

Shipping in the US/48 is now included at the above asking prices!

Roger
Invested
Cash
Kindergarten
Roger
Old
Lost
Life
Every
Day
 

You are correct I was completely backwards on the calcs, efficiency is how much power it needs to draw from the wall to achieve the wattage rating!

http://en.wikipedia.org/wiki/80_Plus

Have a read there to understand rating and efficiency.

Just because a Power Supply "says" it's a 1050 watt 80 plus gold means that the power on whatever rail is rated at the wattage stated for your HX1050 it is actually rated at 12v@87.5A which = 1050 watts.  So far so good.  Next 80+ gold means that at 50% load the power supply will achieve 90% efficiency or .9*1050 = 945 watts at FULL 100% load it will achieve .87*1050 = 913.5 watts.  These are the rates the specific power supplies have been "Certified and tested" to operate at.  Can they do more than that?  Yes some are better than others, but the 80+ rating is all that is guaranteed from a manufacturer

Stats on the HX1050
+3.3V@25A, +5V@25A, +12V@87.5A, -12V@0.8A, +5VSB@3A
80 PLUS GOLD Certified

Percentage of rated load    20%   50%   100%
80 Plus Gold               87%   90%   87%

I'm going to guess your power supplies are under powered.  The HX1050?  I think you said 1020, but didn't see that model the HX1050 has 1050 watt on the 12v at 88% efficiency is 924 watts.  IF the cards are in fact pulling near 300 watt each and the 2 PSUs are BOTH plugged into the motherboard it will also be drawing power from the 2nd power supply.  That being the case you are drawing more than the PSUs can steadily supply.  You said nearly 1550 at the wall 2 850 watt gold rated is 90% efficiency is 1530 watt.  I think you're under powered!

Shipping & Delivery   
Shipping: $17.45 Expedited Shipping | See details
 
Location:
Norman, Oklahoma, United States
 
Ships to: United States

US here Ohio to be exact.  Vacation to the beaches around the US, not California yet farthest west I have made it is Las Vegas.  Also been to Windsor Canada, but other than that pretty sheltered from the world.  Bitcoin has actually allowed me to learn more every day even outside of the currency, but the cultures and happenings around the world!

district PM'd you.

Diamond 6970 - detects by both win and bamt will mine for a second then lock up showing a negative temp reading?
Radeon Ref 5870 - fan drilled and oiled - detects in win and bamt - will mine for a few minutes then rate drops to 0

Those 2 cards install in windows7 and display picture fine have used them for basic browsing and such while attempting different drivers etc. attempting to mine with them.  I can't say what function they are capable of above displaying windows basics though.

Pm'd cannachris back.

I am willing to work on price on the rigs within reason, but unless someone speaks for a rig and doesn't want to purchase ALL the cards in it then I do not want to sell the cards by themselves at this time.

3 BTC shipped in the US for everything?

https://bitcointalk.org/index.php?topic=36061.0

Do that and go back to the old drivers.

http://www.monoprice.com/Product?c_id=102&cp_id=10245&cs_id=1024502&p_id=1321&seq=1&format=2&utm_expid=58369800-11.R-enhtUGRrSdHz5vzpVS2g.0&utm_referrer=http%3A%2F%2Fwww.monoprice.com%2FSearch%2FIndex%3Fkeyword%3Dmolex%2Bp4

I believe even if it did fit the grounds/voltage are in the wrong spots on a PCIe connector.  I used the adapter above for my 1 PSU that does not have a the P4 connector.

If you don't want magical floating by wire cards you can always buy

https://bitcointalk.org/index.php?topic=485258.0

or I have a person that makes aluminum frames within 2 hours of me I would be willing to pick up and ship with each for their cost+gas/4

Make an offer on the lot and mine some scrypt while btc price recovers from the fall of Gox!

Pictures with forum name and date?
Where are these shipping from?
Escrow?
Are you a Scammer?

Rig 1
MSI MS-7390 Motherboard - 2 16x 2 1x pcie slots
7 gigs ram total all 4 slots occupied
Quad Core CPU (socket am2) + Heatsink/fan
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 1050 watt power supply - 80 plus certified
sata to pcie and/or molex to pcie connectors included

XFX 6950 flashed to 6970
Gigabyte HD7850

4 gig jump drive running BAMT 1.1 can be included if needed would be default install
This is currently running at 770Kh/s with no overclocking those 2 cards are capable of 850+Kh/s when overclocked

1.1 BTC or $600


Rig 2
HP DC5800 motherboard - 1 16x 2 1x pcie slots
2 gigs ram total all 4 slots occupied
socket 775 cpu + heatsink/fan
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 800 watt power supply
sata to pcie and/or molex to pcie connectors included

XFX 6870
AX6870 w/ arctic accelero twin turbo
HD5850 w/ arctic accelero L2 plus

4 gig jump drive running BAMT 1.1 can be included if needed would be default install
This is currently running at 900Kh/s with no overclocking those 3 cards are capable of 1+Mh/s when overclocked

.9 BTC or $500


Rig 3
HP xw4300 motherboard - 1 16x 1 8x 1 1x pcie slots
2 gigs ram total all 4 slots occupied
socket 775 cpu (says processor not supported on boot (core 2 duo I believe, but boots and runs bamt fine) + heatsink/fan
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 800 watt power supply
sata to pcie and/or molex to pcie connectors included

MSI 6850 - occasionally has to be reset as temp shows 510* and quits mining has been mining 2+ days currently stable
HD5830 Extreme - has an aftermarket fan clipped on the heatsink (runs cooler than any other cards I own, but can include a brand new arctic accelero L2 plus)
H6790 - 679F1GD - different fan is glued and spliced on this one as well temp runs fine

4 gig jump drive running BAMT 1.1 can be included if needed would be default install (this one is wrapped in black electrical tape since the casing broke)
This is currently running at 690Kh/s with no overclocking those 3 cards are capable of 780-800Kh/s when overclocked

.75 BTC or $400
2 of the cards are hanging from their metal brackets from wires attached to the ceiling they are not magic or floating without assistance!


Rig 4
HP DC5800 motherboard - 1 16x 2 1x pcie slots
3 gigs ram total all 4 slots occupied
socket 775 cpu + heatsink/fan - This socket 775 bracket did not fit right so had cardboard on the underside of the mobo to pull the heatsink tight and the fan is screwed right into the heatsink.
power switch
2 1x to 16x non-powered risers included
HP/Delta Electronics 800 watt power supply
sata to pcie and/or molex to pcie connectors included

HD 5830 Extreme - occasionally artifacts fine after reboot
HIS 6870  - fickle - sometimes crashes display driver and shows 0Khs, fine after a few cgminer restarts running for 3 days currently without issue (this card is in a different desktop not pictured, but is included with rig 4)

No jump drive or hard drive included - this is currently running fine on win7 because bamt complained and woudl show GPU errors so unknown if BAMT works with this one
This is currently running at 570Kh/s between the 2 cards in different systems with no overclocking those cards are capable of 600+Kh/s when overclocked

.55 BTC or $300


Extra Card Graveyard
HD5830 Extreme - Bare Card does not detect in win or bamt
VT5850 - fan/heatsink - does not detect in win or bamt
6950 - H695FN1G2M - Bare - can throw in a gel icy vision cooler with no mounting screws or hardware with this one - this card had heavy artifacts and would not mine last time I tried installing it
Diamond 6970 - detects by both win and bamt will mine for a second then lock up showing a negative temp reading?
Radeon Ref 5870 - fan driller and oiled - detects in win and bamt - will mine for a few minutes then rate drops to 0

This is 1 lot of cards as is .15 BTC or $75


Prices listed do NOT include shipping and are given for close to current value; use the USD price to calc at payment time coinbase or preev pricing.  
Wanting to ship to the US only will use USPS flat rate with insurance.
Have done multiple trades with solid trust history, but if required can use trusted escrow understanding this is mining hardware and as I did the best to describe any issues it can be fickle as many of you know so would prefer escrow be released on deliver and can work with the buyers if they are unhappy or unable to get something to work.
The 3 HP motherboard do not include system fans or USB headers, but they complain on boot about those not being installed so require you to hit F1 on boot.
Edit: forgot to mention the PSUs are larger than standard size.  They have the same bolt pattern to attach to a frame etc, but are longer.

Willing to do a package deal for everything and make me an offer for items shipped. Price and packages will however stay reasonably close to what I'm asking for now.

Scrypt or SHA256 stuff?

Would there be more interest if I sold 3 rigs with 3 cards each and a 4th setup with the cards that have issues?  I have got messages asking for pieces parts, but I'd rather not part out 1 card at a time if possible.

Radeons
6790 - 200KHs - installed different fan after old one locked - mines fine
6850 - 230KHs - mines for undetermined amount of time sometimes days sometimes hours then goes to 510* and quits - consider this one failing, but possibly fixable?  I did recently reapply heat sink paste and it still happens
5830 - 260KHs - different fan installed on the open heat sink - mines fine - have an extra unopened arctic accelero mono fan, but with the clip on fan that's on it it runs cooler than my other cards so I just left it.
5830 - 260KHs
5850 - 400KHs - arctic accelero mono fan
6870 - 300KHs - This card is troublesome - sometimes mines fine sometimes causes display driver to crash in windows and cgminer must be restarted multiple times to work.  It seems better with some drivers than others, but consider this one failing
6870 - 300KHs
6870 - 310KHs - arctic accelero dual fan cooler
7850 - 330KHs
6950/6970 - 430 KHs
6970 - 430KHs? - This one mines for a few seconds then goes to a negative temp and quits?
5870 - 400KHs? - this one I never go working correctly it detects and will run for a short period in BAMT and just slowly drops to no KHs

IF everything were fixed and working with minimal overclocking and tweaking this setup would push 4MHs, but due to issues with a few of the cards noted above It's currently around 2.5-3MHs consistently pushes higher than that while I play with the other cards.  The above noted speeds with the exception of the 5850 are non-overclocked speeds.

Have a few other cards that I consider dead 2 are 5800 series bare cards that have no fans/heat sinks that aren't detected by the OS I will have to check the model on the other, but it artifacts and locks the system when you try to mine.

Systems - The HP Boards complain about no USB or System fans connected so you MUST hit F1 on startup to boot those 3 - unless you shorted the pins or installed USB headers and fans these need manual intervention after reboot or power outage.
1 - HP XW4300 motherboard - 1 full size, 1 8x, 1 1x - 2 Gig Ram (4 512 sticks) - socket 775 cpu
2 - HP DC5800 motherboard - 1 full size, 2 1x - all 2 gig ram (4 512 sticks) - socket 775 cpu - 1 of these boards to be delivered tomorrow
1 - MSI - Will get model but 2 full size and 2 1x slots - will get specs on this system

PSUs - These are Delta Electronics/solid PSUs - they are LARGER than standard power supplys, but same bolt pattern...
3 XW9400 Workstation PSUs 800 Watt
1 XW9600 Workstation PSU 1050 Watt

There are 4 complete setups with room for a few newer or different cards if you're unable to get the "faulty" cards working between the 4 boards there are 13 pcie slots with 12 cards that boot and are detected in the systems with 4 cards that do mine to a point, but have issues.  There are also 3 cards included 2 that don't detect and 1 that artifacts and wouldn't mine the last time I tested it.

I would be willing to work with a trusted escrow with payment on delivery understanding that some of these cards have issues etc.  Shipping will be pretty expensive for all of this and if you would be willing to help up front with shipping maybe .2 btc that would be great.

So 4 complete working motherboards, processors, power supplies, memory, power switches, and risers + video cards described above.

4.3 BTC in escrow .2 up front to help shipping you pay Escrow fees with trusted escrow I will also "tip" the escrow.  Escrow Released on Delivery?

Yes from the cgminer 3.4 readme:

eg:
--avalon-options 115200:24:10:45:282

The values are baud : miners : asic count : timeout : frequency.

Baud:
The device is pretty much hard coded to emulate 115200 baud so you shouldn't
change this.

Miners:
Most Avalons are 3 module devices, which come to 24 miners. 4 module devices
would use 32 here.

Asic count:
Virtually all have 10, so don't change this.

Timeout:
This is how long the device will work on a work item before accepting new work
to replace it. It should be changed according to the frequency (last setting).
It is possible to set this a little lower if you are trying to tune for short
block mining (eg p2pool) but much lower and the device will start creating
duplicate shares.
A value of 'd' means cgminer will calculate it for you based on the frequency

Sample settings for valid different frequencies (last 2 values):
34:375 *
36:350 *
39:325 *
43:300
45:282 (default)
47:270
50:256

Frequency:
This is the clock speed of the devices. Only specific values work, 256, 270,
282 (default), 300, 325, 350 and 375.

Note that setting a value with an asterisk next to it will be using your
avalon outside its spec and you do so at your own risk.