go to the dashboard, where you can select the Algos to mine instead of the algo, scroll till the last that is CUSTOM POOL
|
|
|
Just me on my own there right now though, so wouldn't mind some company, especially if the other pool isn't working as expected
Rewards on the pool is 3.2 zumba, because MN are active ?
|
|
|
ok ok, I miss to select "custom pool" in the dashboard menu..... Rx580 ethereum mod(1click srbpolaris) is giving me 963 H/s with intensity 144, ws 8,2 threads. Haven't touched memory & core overclock from ethereum and timing with optimization as I don't know how to do it properly. So, for the moment, those rx 580 rigs will be happy to mine monero. x16r: sg miner configuration for rx 580 was ( ))) -g 2 --thread-concurrency 1792 I 19. I don't know how to translate it in ggs but I will try tonight The Baffin rigs, that have a small ssd and an hdd, are giving error 761 when I try to install GGS in the HDD (d:\) or in the SSD and then restart, error, restart, till I kill it. I am not in a rush, as I'm mining turtlecoin there (cryptonight lite v7 that you do't support yet) waiting for AEON, but I would like, one day or another, to run a full optimize on the baffin as I know speed can be much higher. I know turtlecoin is a satoshi coin... but they are friends Any suggestion on the 761 error ?
|
|
|
Ok, it doesn't work in one part: x16R Two biggest pool are suprnova ( but I can't as its similar to mining pool hub require registration) and ravenminer. I use zergpool for test normally but noone of the 3 work. Basically the non default pool doesn't work even if selected. I will test for other algos I (GGS, not me as I didn't know they exist) connected now to cryptopoolparty and speed seem ok but better than whatever I achieved with sgminer going over 7.3 Mh/s for each rx 580 so this part is working. Problem is that GGS isn't taking an average of the speed (all the algos are changing)so I can only wait for the pool to recognize me and I don't know how to deal with that and making test on the various options. For now I will wait result from the pool. Edit: no, all the custom pool doesn't work. Kindly note that Cryptonight lite is not cryptonight lite v7 that is what is supported right now from turtlecoin and will be from aeon later on. the non v7 will be alive for another 24h and then death. So, what's the point ? .
|
|
|
Trying to understand ? good attitude Have you try fishing ? if you go in the middle of nowhere and find a fisherman, he will probably tell you which fly to use. If you got in a pond with plenty of fishermen, probably the same guy will just ignore you. Same here.... Somewhere, sometimes ago, some guys had access to some document from Amd. explaining what is the workflow . I was unable to find the original document even if the link is somewhere in Bitcointalk but you probably can and also you will understand it Have you looked at: https://bitcointalk.org/index.php?topic=1758267.0 ? then you don't need to reflash thousands of bios: Go here on monday ( ver 1.3.3 probably will be uploaded and its supposed to work ) https://bitcointalk.org/index.php?topic=1716584.2560
|
|
|
You are on 1.3.2 and you selected custom pool but there is no v7 ? It's a bug I've reported a while ago and the Dev I think he fix in the 1.3.3 that is due before week end.
memory is allocated based on intensity. I had 4 gb card and I remember 112 for cryptonight. for now, you can just lower the intensity till is less than 4 gb if you would like to test. Not sure why, I remember it worked even if was 4,3gb.
ALso this bug has been fix in 1.3.3.....
|
|
|
Can I dualmine with an intel13 6100 ? Just because mining stellite, the pool doesn't accept difficulty lower than 15 k and sometimes I got kicked out
|
|
|
I think that the DCR pool is reserved for Asic now. Cost of the additional energy to run DM for DCR is above what you will get in mining. DM something else
|
|
|
Can I use the sumokoin easyminer with the new algo or do I have to use something else for mining with my CPU?
|
|
|
Thanks. Lost in translation, by windows italiano and me
|
|
|
where you ordered ? for how much ? in the website it show out of stock
|
|
|
a couple of question: I have a rig with 6 1050ti and Xevan, with the Nplus 2.2 doesn't start. it open but it close immediately. Nplus doesn't recognize it so isn't closing it? What to do ? It worked on the 2.1, same rig.
X17: I have two rigs mining ahashpool and zergpool as I'm trying to decide which pool is better because with two it take too long to reash the payment limit. Always X17 is mined on Ahash pool and not on Zergpool, even if the pool show higher returns(generic on the pool). Why ?
last: in the switch windows, last column width is not large enough: i normally read only stratum//tcp/ algo.mine.
can we have 8 caracter more so I can read if its zerg or ahash pool ?
|
|
|
Jce miner can't use Huge pages even if present, recognized by windows Can be that doesn't like the fact that huge pages are on drive d: instead of c: ?
|
|
|
Lamtec, may be just may be, providing more info so people may help you ? My not so educated guess is that you are mining ethereum with a 3 gb 1060 gtx with windows 10. Windows 10 reserve a part of the 3 gb for . So, with the dag size you are at limit. Go back to win7 and you will mine for few other months. Or change algo or, better, mine UBIQ/Ella/Musiccoin/EGEM etc that have much smaller dag
|
|
|
Dear Devoloper,i have 20+ mixed 8 gpu rigs(rx 470,480,570,580) , 1-All same type rigs(forex all 570 working!!) 2-Mixed rigs (forex 5 570,3 480 working!) 3-Mixed rigs 2 580,6 570--- 570's working 580's 0 hash.Claymore all working flawless.something wrong on 580's rigs.480,470 or 570 working without issues.
The rx580 are 4 gb ? Go to device: Select the RX 580, input 2 threads, 112 and 8 as worksize. It should work
|
|
|
Just tell us exactly what you need. You want best setup / card / algos we found in order to put that as default or guideline ? Or I haven't understood what you need ?
|
|
|
Its ethereum bios mod with CN timings.
|
|
|
Can I use this sg miner , with the basic algos, with a Giant N (when cryptonight normal will be Death) ?
|
|
|
Percy, a friend of mine can take 1, so we are at 5 if the newbie take one or someone else joinI am ready to send you € by paypal or crypto in ADVANCE if you would like to proceed with the 1x5 order as you have 50 times the Merit that I have and I think you prefer to receive those ASAP and then send to me rather then the opposite Let me know
|
|
|
|