Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!

[duyquang06]

is there any auto update feature ?

[1715330560]

1715330560

[1715330560]

1715330560

[thin]

testing out 1.2.10.  Cryptonight algo on 8 x RX570s

xmr-stak v2.1 7650 H/s
GGS v 1.2.10  7633 H/s

is there a remote monitoring option?

what are your settings for xmr-stak ?

[UnclWish]

In 1.2.10 problem with high CPU usage is no so hard, but exists. After several hours GGS start to use CPU jumping from 2% to 14%.
I think that it's due to statistics charts... Stop-Start didn't helps. Only restarting...

I think you must add an option to restart after selected period of time. Or do something else with CPU usage. Maybe if GGS is minimized charts must stop?

[oldman8]

In 1.2.10 problem with high CPU usage is no so hard, but exists. After several hours GGS start to use CPU jumping from 2% to 14%.
I think that it's due to statistics charts... Stop-Start didn't helps. Only restarting...

I think you must add an option to restart after selected period of time. Or do something else with CPU usage. Maybe if GGS is minimized charts must stop?

Yeah, i think adding a user preferred/auto restart function would be cool too.
Btw, can add a function to change font size too?
Sorry, old man can't see very well . 

[oxothuk]

version 1.2.10
Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.

It must be your pool, then. Which coin are you mining at which pool?

Confirm this problem on some pools,  zpool and mine,   in both tested   Neoscrypt,  after some time workers disappear at pools, but app still works and load GPU 100%

[zawawa]

version 1.2.10
Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.

It must be your pool, then. Which coin are you mining at which pool?

Confirm this problem on some pools,  zpool and mine,   in both tested   Neoscrypt,  after some time workers disappear at pools, but app still works and load GPU 100%

So chaotic is our Cryptoland... I will implement a workaround.

[UnclWish]

And again meet bug with jumping speed. After 1,3 hour speed on all GPU's start to jump fron 0 to 1000 h/s and then stabilize on normal speed.
And it's need to fix overclock system hangs on Pitcairn. So as binary kernel slow down on 4Gb Pitcairn.

P.S. Yes, CPU usage is growing with time. At start it's only 0-1-2%. It's good. But after 1 hour it's allready 0-4%. And jumps continues to grow.

[songjuhee]

And again meet bug with jumping speed. After 1,3 hour speed on all GPU's start to jump fron 0 to 1000 h/s and then stabilize on normal speed.
And it's need to fix overclock system hangs on Pitcairn. So as binary kernel slow down on 4Gb Pitcairn.

P.S. Yes, CPU usage is growing with time. At start it's only 0-1-2%. It's good. But after 1 hour it's allready 0-4%. And jumps continues to grow.

Yup, i got that too.. from 900 h/s suddenly jump to 1000 h/s even 1,200 h/s for 1 second and drop to 600 h/s

[UnclWish]

And again meet bug with jumping speed. After 1,3 hour speed on all GPU's start to jump fron 0 to 1000 h/s and then stabilize on normal speed.
And it's need to fix overclock system hangs on Pitcairn. So as binary kernel slow down on 4Gb Pitcairn.

P.S. Yes, CPU usage is growing with time. At start it's only 0-1-2%. It's good. But after 1 hour it's allready 0-4%. And jumps continues to grow.

Yup, i got that too.. from 900 h/s suddenly jump to 1000 h/s even 1,200 h/s for 1 second and drop to 600 h/s

This issue appears not allways. It can happens or not...

[zawawa]

I don't think those "jumps" are problematic. I could use raw intensity instead of intensity to get rid of them, but that is not urgent.
As for Pircairn, the problem is really with the driver and there is not much I could do about it at this point...

[zawawa]

The stability issue with yiimp-based pools and NeoScrypt is fixed, I think.
I will push a new release shortly.

[zawawa]

Zawawa, isn't that you speak italian ? As I saw something form some users

is Devfee income is now  substainable from your side ? I really hope so

No, I don't speak Italian. lol I am of Japanese descent. I lived in the United States for a long time, though.

As for the DEVFEE, I need at least 10 times as much as I am making right now for my wife and I to live off of it.
My forte is actually kernel optimizations, and I haven't been able to do much of that with GGS up until now.
The miner is definitely getting more stable, so hopefully I get to optimizations sooner than later to increase a cash flow.

[oxothuk]

The stability issue with yiimp-based pools and NeoScrypt is fixed, I think.
I will push a new release shortly.

Great,  thank you.. will test as soon at release...

[UnclWish]

I don't think those "jumps" are problematic. I could use raw intensity instead of intensity to get rid of them, but that is not urgent.
As for Pircairn, the problem is really with the driver and there is not much I could do about it at this point...

What about CPU usage? After 5-7 hours it allready 7-8% - average from jumps 0 to 15%.

[zawawa]

7-8% isn't bad at all given the fact that GGS is written in C#.
GGS'es CPU usage wouldn't be the same as other miners written in C++.
It is all about making a trade-off between efficiency and shorter development turnaround times.

[UnclWish]

7-8% isn't bad at all given the fact that GGS is written in C#.
GGS'es CPU usage wouldn't be the same as other miners written in C++.
It is all about making a trade-off between efficiency and shorter development turnaround times.

Ok, I'm understand. But how much CPU usage will be after 24 hours? Or more? If it allways growing than it may by very high. Maybe you add an option to schedule restart of GGS after selected period of time?

[argai666]

https://imgur.com/a/N5GBf

That is before switching

https://imgur.com/a/ja6dE

That is after.

I want to mine neoscrypt coins! Please, help!

Can you tell the overclock/memory/voltage settings. Which rom did you use and what is your memory thype of RX580s. I can't get more that 770h/s for my RX580s and they draw 115W each.

[softclickbr]

version 1.2.10
Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.

It must be your pool, then. Which coin are you mining at which pool?

Confirm this problem on some pools,  zpool and mine,   in both tested   Neoscrypt,  after some time workers disappear at pools, but app still works and load GPU 100%

Exactly same problem here with pool.Bsod.pw. Downgrading...



1.2.10:

...

2018-01-28 22:41:14.2152 [16] Device #2 submitted Share #13 to pool.bsod.pw as RQL48SX2P3m1ySmsyFFexNNKFiJiQ9e4e9.RXNITROMQ0.
2018-01-28 22:41:14.5339 [15] Share #12 accepted.
2018-01-28 22:41:14.7889 [16] Device #2: 884,41 Kh/s (NeoScrypt)
2018-01-28 22:41:14.8848 [15] Share #13 accepted.
2018-01-28 22:41:24.7909 [16] Device #2: 900,33 Kh/s (NeoScrypt)
2018-01-28 22:41:34.7973 [16] Device #2: 899,49 Kh/s (NeoScrypt)
2018-01-28 22:41:44.7997 [16] Device #2: 897,40 Kh/s (NeoScrypt)
2018-01-28 22:41:54.8027 [16] Device #2: 898,04 Kh/s (NeoScrypt)
2018-01-28 22:42:01.8441 [15] Received new job: 7e
2018-01-28 22:42:04.8299 [16] Device #2: 902,64 Kh/s (NeoScrypt)
2018-01-28 22:42:09.9310 [10] Running garbage collection...
2018-01-28 22:42:09.9310 [10] Memory used before collection: 46MB
2018-01-28 22:42:09.9565 [10] Memory used before collection: 12MB
2018-01-28 22:42:14.8569 [16] Device #2: 902,66 Kh/s (NeoScrypt)
2018-01-28 22:42:23.4647 [1] Switching to the DEVFEE mode...
2018-01-28 22:42:24.8840 [16] Device #2: 900,22 Kh/s (NeoScrypt)
2018-01-28 22:42:26.2380 [16] Restarting miner thread...
2018-01-28 22:42:27.4606 [1] Stopping miners...
2018-01-28 22:42:27.5470 [16] Exception in miner thread: Stratum server failed to send a new job.   em GatelessGateSharp.OpenCLNeoScryptMiner.MinerThread()
2018-01-28 22:42:27.5746 [1] Stopped miners.
2018-01-28 22:42:38.5971 [1] Stopping miners...
2018-01-28 22:42:38.6335 [1] Stopped miners.
2018-01-28 22:42:38.6480 [1] Launching NeoScrypt miners for DEVFEE...
2018-01-28 22:42:39.9507 [20] Miner thread for Device #2 started.
2018-01-28 22:42:39.9593 [20] Loaded Kernels\neoscrypt.cl for Device #2.
2018-01-28 22:42:41.4645 [1] Stopping miners...
2018-01-28 22:42:44.8357 [20] Built neoscrypt program for Device #2.
2018-01-28 22:42:44.8357 [20] Build options: -O5 -legacy -IKernels -DWORKSIZE=256
2018-01-28 22:42:44.8793 [1] Stopped miners.
2018-01-28 22:42:54.9307 [1] Stopping miners...
2018-01-28 22:42:54.9845 [1] Stopped miners.
2018-01-28 22:42:54.9965 [1] Launching NeoScrypt miners for DEVFEE...
2018-01-28 22:42:56.4951 [20] Miner thread for Device #2 started.
2018-01-28 22:42:56.5026 [20] Loaded Kernels\neoscrypt.cl for Device #2.
2018-01-28 22:42:57.4622 [1] Stopping miners...
2018-01-28 22:43:01.4841 [20] Built neoscrypt program for Device #2.
2018-01-28 22:43:01.4841 [20] Build options: -O5 -legacy -IKernels -DWORKSIZE=256
2018-01-28 22:43:01.5132 [1] Stopped miners.
2018-01-28 22:43:11.5371 [1] Stopping miners...
2018-01-28 22:43:11.5715 [1] Stopped miners.
2018-01-28 22:43:11.5890 [1] Launching NeoScrypt miners for DEVFEE...
2018-01-28 22:43:12.9924 [20] Miner thread for Device #2 started.
2018-01-28 22:43:12.9989 [20] Loaded Kernels\neoscrypt.cl for Device #2.
2018-01-28 22:43:13.4632 [1] Stopping miners...
2018-01-28 22:43:17.9529 [20] Built neoscrypt program for Device #2.
2018-01-28 22:43:17.9529 [20] Build options: -O5 -legacy -IKernels -DWORKSIZE=256
2018-01-28 22:43:17.9956 [1] Stopped miners.
2018-01-28 22:43:28.0267 [1] Stopping miners...
2018-01-28 22:43:28.0796 [1] Stopped miners.
2018-01-28 22:43:28.0915 [1] Launching NeoScrypt miners for DEVFEE...
2018-01-28 22:43:29.4734 [20] Miner thread for Device #2 started.
2018-01-28 22:43:29.4810 [20] Loaded Kernels\neoscrypt.cl for Device #2.
2018-01-28 22:43:30.2591 [1] Switching back from the DEVFEE mode...
2018-01-28 22:43:34.7274 [20] Built neoscrypt program for Device #2.
2018-01-28 22:43:34.7274 [20] Build options: -O5 -legacy -IKernels -DWORKSIZE=256
2018-01-28 22:43:44.7576 [20] Device #2: 900,42 Kh/s (NeoScrypt)
2018-01-28 22:43:54.7726 [20] Device #2: 899,57 Kh/s (NeoScrypt)
2018-01-28 22:44:04.7843 [20] Device #2: 893,86 Kh/s (NeoScrypt)
2018-01-28 22:44:14.7944 [20] Device #2: 901,79 Kh/s (NeoScrypt)
2018-01-28 22:44:24.8033 [20] Device #2: 899,74 Kh/s (NeoScrypt)
2018-01-28 22:44:34.8135 [20] Device #2: 897,45 Kh/s (NeoScrypt)
2018-01-28 22:44:44.8322 [20] Device #2: 898,16 Kh/s (NeoScrypt)
2018-01-28 22:44:54.8449 [20] Device #2: 891,87 Kh/s (NeoScrypt)
2018-01-28 22:45:04.8669 [20] Device #2: 898,01 Kh/s (NeoScrypt)
2018-01-28 22:45:14.8865 [20] Device #2: 899,04 Kh/s (NeoScrypt)
2018-01-28 22:45:24.9138 [20] Device #2: 896,59 Kh/s (NeoScrypt)
2018-01-28 22:45:34.9307 [20] Device #2: 901,32 Kh/s (NeoScrypt)
2018-01-28 22:45:44.9454 [20] Device #2: 897,82 Kh/s (NeoScrypt)
2018-01-28 22:45:54.9626 [20] Device #2: 902,09 Kh/s (NeoScrypt)
2018-01-28 22:46:04.9801 [20] Device #2: 898,35 Kh/s (NeoScrypt)
2018-01-28 22:46:14.9901 [20] Device #2: 901,94 Kh/s (NeoScrypt)
2018-01-28 22:46:25.0078 [20] Device #2: 900,17 Kh/s (NeoScrypt)


Never comes to send any share.


Another problem in 1.2.9 aplha, at 4k resolution, not able to see Local Work size dua GUI design error .
http://tinypic.com/r/w003zo/9

[softclickbr]

Downgraded to 1.2.9 and number of shares in Gui is not correct. See the status bar against Gui:

https://i.imgur.com/DwhWMkE.png

[softclickbr]

Any idea to get 30mh/s or more with a Rx580 in Lyra2Rev with Gateless Gate Sharp as is possible with another miner?

Worksize, intensity...

Or wait for a new version?