New sales price 0.885 BTC for one S1  Ty. I need more. Keep shipping. |
|
|
|
|
Can you take Escrow like Ognasty
|
|
|
|
Looking at their sales just over 300miners sold now in last 12hours after sales opened again, US is only waking up. Least that many agree with you. As so do I.
how can you know that ?? 300 miners ?  Bitmain webshop-BTC wallet balance went up for +300BTC today also all incoming transactions can be split with 0.893 -coupon or no coupons. Not impossible to count, I think i saw one purhace over 25 miners. When I posted here the balance was 19600 I remeber it being bit under. Sales were open again today. https://bitcointalk.org/index.php?topic=170332.msg6109830#msg6109830Currently over 20k. https://blockchain.info/address/1QB8Ds5KbGYBLQa5RyDQ2sVUeSKWf7qgkZBitmain is only solid supplier of 2014. |
|
|
|
I just dont get. Who pays 0.893 BTC for an Antminer S1?
Will you ever make it back?
You don't think of it as paying 0.893 you pay $400US which you convert to BTC just for the purchase and the chances of making back $400 are pretty good, especially when you factor in the resale value. Looking at their sales just over 300miners sold now in last 12hours after sales opened again, US is only waking up. Least that many agree with you. As so do I. Resale value is over 400$ still. While Bitmain sales were halted for few days, everywhere you saw posts "where can I buy one" and current resale price was going over 500$ |
|
|
|
well what you posted showed no bad chips
and what you have is based on the avalon1 design using the avalon2 chips
the later avalon2 that firmware will not work as they need the the chip freq and Chip voltage to be set
and there is a bug in the avalon2 drive for cgminer that still needs to be fixed to work
Ok Thank you for that info. I only have these BTMine units with Avalon2 chips. Very common ones in Bitcointalk. My very first hashunit in that log is only hashing 50% of speed. it has 5 out of 10 chips dead, cold. |
|
|
|
EVERYONE PLEASE BE AWARE THAT THE FIRMWARE THAT CON KOVALIS IS PUTTING OUT IS FOR THE AVALON1 HARDWARE IT WILL NOT WORK FOR THE AVALON2 HARDWARE OR THE AVALON2 CHINESE CLONES
Wut? Why I disagree with the Avalon2 clones. Running TP-LINK TL-WR703N v1 Seems to work fine. I bought this unit secondhand busted and it has always had 5 dead chips. Apart that its rock solid performer. I am aware it has high temps 61c... I removed noisy fans and put silent ones there, it only has to last for couple of months more before its jus expensive heater. It gets very hot but works 24h/7days no issues under that temp ~209GH/s [Firmware Version] => 20140324
cgminer: 698d677
cgminer-openwrt-packages: aadd747+
luci: 346e3e7+
Reply was 'STATUS=S,When=1396917993,Code=70,Msg=CGMiner stats,Description=cgminer 4.2.1|STATS=0,ID=AVA0,Elapsed=7873,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=16,asic_count=10,timeout=9,frequency=1400,fan1=0,fan2=0,fan3=1440,temp1=32,temp2=61,temp3=-1,temp_max=61.000000,Device Hardware%=2.8237,no_matching_work=4572,match_work_count1=12535,match_work_count2=25237,match_work_count3=25392,match_work_count4=25203,match_work_count5=25056,match_work_count6=25303,match_work_count7=24953,match_work_count8=25255,match_work_count9=25210,match_work_count10=25630,match_work_count11=25575,match_work_count12=25101,match_work_count13=24974,match_work_count14=25210,match_work_count15=22640,match_work_count16=25332,Controller Version=0,Avalon Chip=55,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=433507 0|STATS=1,ID=POOL0,Elapsed=7873,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=256.00000000,Min Diff=256.00000000,Max Diff=256.00000000,Min Diff Count=430877,Max Diff Count=430877,Times Sent=1520,Bytes Sent=184253,Times Recv=1715,Bytes Recv=257619,Net Bytes Sent=184253,Net Bytes Recv=257619|STATS=2,ID=POOL1,Elapsed=7873,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=3,Bytes Sent=230,Times Recv=5,Bytes Recv=10004,Net Bytes Sent=230,Net Bytes Recv=10004|STATS=3,ID=POOL2,Elapsed=7873,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=141,Times Recv=4,Bytes Recv=1352,Net Bytes Sent=141,Net Bytes Recv=1352|'
[STATUS] =>
(
[STATUS] => S
[When] => 1396917993
[Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.2.1
)
[STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 7873
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 9
[frequency] => 1400
[fan1] => 0
[fan2] => 0
[fan3] => 1440
[temp1] => 32
[temp2] => 61
[temp3] => -1
[temp_max] => 61.000000
[Device Hardware%] => 2.8237
[no_matching_work] => 4572
[match_work_count1] => 12535
[match_work_count2] => 25237
[match_work_count3] => 25392
[match_work_count4] => 25203
[match_work_count5] => 25056
[match_work_count6] => 25303
[match_work_count7] => 24953
[match_work_count8] => 25255
[match_work_count9] => 25210
[match_work_count10] => 25630
[match_work_count11] => 25575
[match_work_count12] => 25101
[match_work_count13] => 24974
[match_work_count14] => 25210
[match_work_count15] => 22640
[match_work_count16] => 25332
[Controller Version] => 0
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 433507 0
)
[/code] |
|
|
|
Updated remotely on the fly, with android phone + chrome. Working fine. Thx. |
|
|
|
LIGHTNINGASIC GRIDSEED SCRYPT ONLY MINER BLADE
There are 2 PCBA.
Each PCBA 40 GC3355 chips.
Each PCBA has it’s own power socket and usb port.
one 80-chip blade miner is equivalent to 16 5-chip USB miners
Official Scrypt hashrate is 5.2M (2.6M on each PCBA)
Scrypt only mode: 64-70W on each PCBA. (140W per miner)
PSU/Controller/USB cables are included.
Price for this sweet miner. Pictures and shipping date also. |
|
|
|
Oh and one more question:
so board 5 is dead. could somebody point out in a photo which board i need to replace?
I have watercooling kit on one unit. Its nice but noth worth it. You will find broken blade by touching the chips with finger, when it wont hurt its the broken unit. |
|
|
|
well, if organofcorti info is correct, then KnC is getting 0.13X3600=468BTC/day or $212K, but who is counting?  <snip> The network has been solving ~1200 blocks per week for a while now. That puts the block rate at ~ 171 blocks per day, and btc per day at ~ 4285. For KNC: 0.13 * 1200/7 * 25 = 557.1429 which (at current exchange rates) ~ US$255728.6 per day. Those numbers look crazy. 40mil $ /month mining operation. That makes the Bitmain antminers sales wallet with 19600 BTC look...tiny  https://blockchain.info/address/1QB8Ds5KbGYBLQa5RyDQ2sVUeSKWf7qgkZKNC had great scheam to make some real business with Jupiter here. Instead of cashing out existing hardwares why not fund the hardware with preorders. Build the datorhall to old helicopter hangar. Make big enough mining operation to pay out any shipment delays to pre-order customers while continue developing new hardware to keep the datorhall populated with state of the art asics for upcoming months and maybe years. huh. They made this much with declining BTC prices. What if price had gone up.. huh. What a gamble to become BTC millionares. $255K a day makes for ~$7.77 mil/average mo (30.5 days). Still, a nice 100 mil a year. Yes i picked up that they make 4285 btc per day when calculating. Ofc it was 13% of that. My mistake on numbers |
|
|
|
well, if organofcorti info is correct, then KnC is getting 0.13X3600=468BTC/day or $212K, but who is counting? <snip> The network has been solving ~1200 blocks per week for a while now. That puts the block rate at ~ 171 blocks per day, and btc per day at ~ 4285. For KNC: 0.13 * 1200/7 * 25 = 557.1429 which (at current exchange rates) ~ US$255728.6 per day. Those numbers look crazy. 40mil $ /month mining operation. That makes the Bitmain antminers sales wallet with 19600 BTC look...tiny https://blockchain.info/address/1QB8Ds5KbGYBLQa5RyDQ2sVUeSKWf7qgkZKNC had great scheam to make some real business with Jupiter here. Instead of cashing out existing hardwares why not fund the hardware with preorders. Build the datorhall to old helicopter hangar. Make big enough mining operation to pay out any shipment delays to pre-order customers while continue developing new hardware to keep the datorhall populated with state of the art asics for upcoming months and maybe years. huh. They made this much with declining BTC prices. What if price had gone up.. huh. What a gamble to become BTC millionares. |
|
|
|
Update March. 29, 2014: The chips passed all functionality tests.
(Reserved for Updates)
Yep they are late. |
|
|
|
ASDF Time to dance one of my BTMine Avalon miner has found a BLOCK. If only would have solo mined. 25 BTC   On a sidenote the unit is running fine 1500OC for 16days now with outside temperature around 0C sometimes under... like now -1 |
|
|
|
Like a nervous expectant father....
I think I've got everything prepped:
-bench cleared and ready for surgery reseating the inevitably unseated cards. cordless screwdriver battery charging.
-2nd router daisy-chained to primary router to create 192.168.1.x subnet
-AntMiner S2 manual pdf downloaded and open
-exterior security cameras watching for UPS truck
-credit card on hand to pay import duty
-wearing out command-r refreshing this thread
have i missed anything?
Haha few beers coz it will be easy plug and play. +1 for best photo |
|
|
|
|
Prices prices. Where to buy.
|
|
|
|
Pecaili, do you know why the top fan (of the new chasis) is bigger than than the bottom one?
Can you ask the engineer why do we need a strong fan for the top?
I plan to replace the fans so i want to be safe.
Top fan provides 2x airflow compared to others. If you replace it with lesser fan the unit will overheat. |
|
|
|
any confermation from bitmain on if s1 will come back, and how pricing waill be in the future?
I have a feeling their chip supply/manufacturing capacity is being converted to S2, my guess is that at this BTC price the shipping cost is starting to eat to much into their S1 profits to be worth it. Most people think the S1 and the S2 use the same chips. My bet is the boards are almost the same as well, just undervolted. I agree. Price means everything. Ship more, do it cheaper. Printing those proven 55nm chips is very cheap now. Generally mining board like that wont cost too much when your doing 500 000 or more. If chip is your own. Bitmain must aim shipping S2 miners huge amounts. |
|
|
|
*removed picture*
This is the board i need help sourcing, It says on their site the ship with extra. Anyone have any info on it?
i can order them if you want Have you price for these boards. Also get price for spare blades. |
|
|
|
|
Show Posts
