We have some improvements1. You can separate your workers without changing the wallet-id. This allows you to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without a number works as before. 2. Implemented monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can monitor your rigs singly. 3. Deployed a new server in Japan! eredluin.dwarfpool.com For users from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance!DwarfPool Quality you can trust!
|
|
|
Some improvements on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! 3. We have deployed a new server in Japan! eredluin.dwarfpool.com For users from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance!DwarfPool Quality you can trust!
|
|
|
Some changes on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! 3. Deployed a new server in Japan! eredluin.dwarfpool.com For users from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance!DwarfPool Quality you can trust!
|
|
|
Some improvements on DwarfPool ( Anonymous, no registration required) 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! 3. We have deployed a new server in Japan! eredluin.dwarfpool.com For users from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance!DwarfPool Quality you can trust!
|
|
|
Some improvements on DwarfPool ( Anonymous,no registration required) 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! 3. We have deployed a new server in Japan! eredluin.dwarfpool.com For customers from Asia this will be faster than using our European or American server. You should use the closest server to your location for best performance! DwarfPool Quality you can trust!
|
|
|
My wallet wont connect to the network.. what are conf file for wallet? Can i get nodes also. Thanks! Here it is Sample belicoin.conf rpcuser=username rpcpassword=password rpcallowip=localhost rpcport=33333 port=33334 gen=0 server=1 addnode=5.249.152.159:33334 my wallet can't connect help..please addnode=5.249.152.159:33334 addnode=94.7.140.32:33334 addnode=71.7.72.16:33334 addnode=86.174.175.55:33334 addnode=95.145.229.62:33334 addnode=112.232.90.65:33334 addnode=37.187.129.122:33334
|
|
|
rewards do not get confirmed on dwarfpool... why?
Every immature block needs 140 confirmations (ca. 2 hours and 20 minutes ). Currently last found and confirmed is 3753. All informations on the main page of pool.
|
|
|
Some improvements on DwarfPool ( Anonymous,no registration required) 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust!
|
|
|
Some improvements on DwarfPool ( Anonymous, no registration required) 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust!
|
|
|
Some changes on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust!
|
|
|
Some improvements on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust!
|
|
|
Some changes on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust! Profit Calculator
|
|
|
We have some improvements1. You can separate your workers without changing the wallet-id. This allows you to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without a number works as before. 2. Implemented monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can monitor your rigs singly.
|
|
|
Dwarf pool is on correct chain. You can add their address ass an addnode=moria.dwarfpool.com it will help ensure your on the correct chain if you are also mining with them
Most of the other pools also seem to be arriving on the correct chain.
Thank you guys for your support. And I will continue to do what ever it takes to keep this coin goin. Few hiccups along the way but with out them where would the fun be?
-365-
currently wallet shows "blocks" : 710, "difficulty" : 6501.93966607,
but better add node not moria, because of ddos-protections, you can add erebor addnode=erebor.dwarfpool.com
|
|
|
You must update your wallets to latest "v0.9.0.0-g8c5e74e-beta" with checkpoint!
|
|
|
DwarfPool is on the latest wallet with checkpoint
|
|
|
Currently no working pools (if you think it works, then it's on the old version)
|
|
|
seems Dwarfpool is back on track now block 558
No, the pool is disabled.
|
|
|
What I want to know is: Why did dwarf loose 1/2 its blocks BEFORE the fork??? It was just statistic script. Wenn the network will be stabilized, all blocks will be recalculated. they are not lost, but currently I cannot check which blocks were found, because of coin-network common problem. Currently the wallet-daemons worked, but the pool is disabled. The 365Ccoin still has BIG problem on the network
|
|
|
|