|
Jabulon
|
|
March 10, 2014, 05:48:37 PM |
|
Anyone have a good keccak config for r9 290x? I'm only getting 370-ish, probably could squeeze out a bit more. Scrypt usually 880 per GPU. I dropped TC to around 21,000, and have I-13 gpu-threads 1, mem 1500 core 920. Any suggestions? Also, if anyone has settings for 7970's and/or 7950's, I'd be grateful for your input. I'm in the process of turning all my rigs over to this coin. Thanks brethren of the 365
|
|
|
|
thekekk
|
|
March 10, 2014, 05:51:22 PM |
|
Anyone have a good keccak config for r9 290x? I'm only getting 370-ish, probably could squeeze out a bit more. Scrypt usually 880 per GPU. I dropped TC to around 21,000, and have I-13 gpu-threads 1, mem 1500 core 920. Any suggestions? Also, if anyone has settings for 7970's and/or 7950's, I'd be grateful for your input. I'm in the process of turning all my rigs over to this coin. Thanks brethren of the 365290= cgminer.exe --keccak --no-submit-stale -I 8 --gpu-powertune 20 -g 1 -w 256 --gpu-engine 1100 --gpu-memclock 675 -o 280 = 1080-1100 gpu engine 7950=1080 u can set -I more but no need for cpu usage
|
BTC: 1AqwCAprjKRniThdxvCDx1TMPUYsqd8ig7 EAC: eYqPmqv3AiB12Z5b2MMpNm1vXtVPnp5PPX e-token: e4ViTyRpJF9whLiKtLaAranijfeoTrww4u
|
|
|
Jabulon
|
|
March 10, 2014, 05:52:56 PM |
|
Anyone have a good keccak config for r9 290x? I'm only getting 370-ish, probably could squeeze out a bit more. Scrypt usually 880 per GPU. I dropped TC to around 21,000, and have I-13 gpu-threads 1, mem 1500 core 920. Any suggestions? Also, if anyone has settings for 7970's and/or 7950's, I'd be grateful for your input. I'm in the process of turning all my rigs over to this coin. Thanks brethren of the 365cgminer.exe --keccak --no-submit-stale -I 8 --gpu-powertune 20 -g 1 -w 256 --gpu-engine 1100 --gpu-memclock 675 -o u can set -I more but no need for cpu usage Thanks. But was that for 290x or one of the other cards?
|
|
|
|
thekekk
|
|
March 10, 2014, 05:54:08 PM |
|
Anyone have a good keccak config for r9 290x? I'm only getting 370-ish, probably could squeeze out a bit more. Scrypt usually 880 per GPU. I dropped TC to around 21,000, and have I-13 gpu-threads 1, mem 1500 core 920. Any suggestions? Also, if anyone has settings for 7970's and/or 7950's, I'd be grateful for your input. I'm in the process of turning all my rigs over to this coin. Thanks brethren of the 365cgminer.exe --keccak --no-submit-stale -I 8 --gpu-powertune 20 -g 1 -w 256 --gpu-engine 1100 --gpu-memclock 675 -o u can set -I more but no need for cpu usage Thanks. But was that for 290x or one of the other cards? I edited post for all
|
BTC: 1AqwCAprjKRniThdxvCDx1TMPUYsqd8ig7 EAC: eYqPmqv3AiB12Z5b2MMpNm1vXtVPnp5PPX e-token: e4ViTyRpJF9whLiKtLaAranijfeoTrww4u
|
|
|
Lydian
|
|
March 10, 2014, 06:02:56 PM |
|
How many Mh/s should I approximatelly get for
1) R9 270X 2) R9 290
cards? I know what to expect from scrypt and n-factor scrypt but have no idea what to expect from keccak?!
keccak is aprox. 50% of scrypt ... i have 760kHps for scrypt and 380kHps for keccak on r9 280x 280X (powercolor) => 326Mhs 290 (sapphire) => 416Mhs "intensity" : "13,13", "vectors" : "1,1", "worksize" : "256,256", "kernel" : "keccak", "lookup-gap" : "2,2", "gpu-threads" : "2", "thread-concurrency" : "8193,27000", "gpu-engine" : "1080,1000", "gpu-fan" : "30-80,30-80", "gpu-memclock" : "1500,1300", "gpu-memdiff" : "0,0", "gpu-powertune" : "-20,20",
|
|
|
|
|
jsamul
|
|
March 10, 2014, 06:27:18 PM |
|
How many Mh/s should I approximatelly get for
1) R9 270X 2) R9 290
cards? I know what to expect from scrypt and n-factor scrypt but have no idea what to expect from keccak?!
keccak is aprox. 50% of scrypt ... i have 760kHps for scrypt and 380kHps for keccak on r9 280x 280X (powercolor) => 326Mhs 290 (sapphire) => 416Mhs "intensity" : "13,13", "vectors" : "1,1", "worksize" : "256,256", "kernel" : "keccak", "lookup-gap" : "2,2", "gpu-threads" : "2", "thread-concurrency" : "8193,27000", "gpu-engine" : "1080,1000", "gpu-fan" : "30-80,30-80", "gpu-memclock" : "1500,1300", "gpu-memdiff" : "0,0", "gpu-powertune" : "-20,20",
why not intensity=14? should boost the hashrate to 360 for 280X... also you can ignore TC, which has no effect. i use cgminer --keccak --gpu-fan 85 --gpu-engine 1150 --gpu-memclock 1000 -I 14 -w 256 to get 387MHps with 280X. i cant use lower memclock, otherwise i would.
|
|
|
|
Lydian
|
|
March 10, 2014, 06:51:59 PM |
|
why not intensity=14? should boost the hashrate to 360 for 280X... also you can ignore TC, which has no effect. i use cgminer --keccak --gpu-fan 85 --gpu-engine 1150 --gpu-memclock 1000 -I 14 -w 256 to get 387MHps with 280X. i cant use lower memclock, otherwise i would. cgminer.exe --keccak --no-submit-stale <POOLINFO> --lookup-gap 2 -g 2 -I 14 -w 256 --auto-fan --gpu-fan 30-80 --temp-cutoff 90 --temp-overheat 88 --temp-target 83 --gpu-memclock 1000 --gpu-engine 1150 --gpu-powertune -20 346,7Mhs (280X Vapor-X)
|
|
|
|
jsamul
|
|
March 10, 2014, 06:56:12 PM |
|
why not intensity=14? should boost the hashrate to 360 for 280X... also you can ignore TC, which has no effect. i use cgminer --keccak --gpu-fan 85 --gpu-engine 1150 --gpu-memclock 1000 -I 14 -w 256 to get 387MHps with 280X. i cant use lower memclock, otherwise i would. cgminer.exe --keccak --no-submit-stale <POOLINFO> --lookup-gap 2 -g 2 -I 14 -w 256 --auto-fan --gpu-fan 30-80 --temp-cutoff 90 --temp-overheat 88 --temp-target 83 --gpu-memclock 1000 --gpu-engine 1150 --gpu-powertune -20 346,7Mhs (280X Vapor-X) seems low... i would try to remove the -g 2 as one thread should be enough and also powertune can mess the clocks, so try to run without it.
|
|
|
|
AcidSplash
Member
Offline
Activity: 101
Merit: 10
|
|
March 10, 2014, 07:04:06 PM |
|
I don't know why people are putting in all those settings for the R9 280x. Just setting the intensity to 11 works fine. http://www.bild.me/bild.php?file=2712499screenshot.jpgPowercolor R9 280x's run solid at 369 Mh/s. (GPU 0,1,2) at 1.1 V, 1100 for the core clock and 1000 for the memory. The last card (GPU 3) is an Asus r9 280x at 386 Mh/s at 1.2 V, 1150 core clock and 1000 for the memory. It can go beyond 400 Mh/s, I just haven't tested it very much as it seems to need more power than the other cards. For stability has anyone tested the PowerColor r9 280's below 1.1v?
|
|
|
|
Lydian
|
|
March 10, 2014, 07:24:46 PM |
|
--lookup-gap 2 -I 14 -w 256 --auto-fan --gpu-fan 30-80 --temp-cutoff 90 --temp-overheat 88 --temp-target 83 --gpu-memclock 1000 --gpu-engine 1100
~370 Mh/s thanks!
|
|
|
|
midnight_rgs
|
|
March 10, 2014, 07:25:09 PM |
|
Price is very low...
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 10, 2014, 07:46:40 PM |
|
Anyone have a good keccak config for r9 290x? I'm only getting 370-ish, probably could squeeze out a bit more. Scrypt usually 880 per GPU. I dropped TC to around 21,000, and have I-13 gpu-threads 1, mem 1500 core 920. Any suggestions? Also, if anyone has settings for 7970's and/or 7950's, I'd be grateful for your input. I'm in the process of turning all my rigs over to this coin. Thanks brethren of the 365Keccak depends mostly on GPU speed does it not, I am using a TOxic 280x at home and i am avg 407. I am not at home at the moment to give exact settings, but I can say my 280x is clocked at 1200GPU 800MEM 1.2V, Intensity 13-14 and Worksize 256
|
|
|
|
Alpinist
|
|
March 10, 2014, 07:47:10 PM |
|
Price is very low... Agree! I think the right price is 30BTC at least. So those who buys now for 10BTC will make a pretty good profit.
|
|
|
|
Jabulon
|
|
March 10, 2014, 07:58:35 PM |
|
Anyone have a good keccak config for r9 290x? I'm only getting 370-ish, probably could squeeze out a bit more. Scrypt usually 880 per GPU. I dropped TC to around 21,000, and have I-13 gpu-threads 1, mem 1500 core 920. Any suggestions? Also, if anyone has settings for 7970's and/or 7950's, I'd be grateful for your input. I'm in the process of turning all my rigs over to this coin. Thanks brethren of the 365Keccak depends mostly on GPU speed does it not, I am using a TOxic 280x at home and i am avg 407. I am not at home at the moment to give exact settings, but I can say my 280x is clocked at 1200GPU 800MEM 1.2V, Intensity 13-14 and Worksize 256 Thanks. Seems like people are saying dropping memclock and upping core. Would be curious to hear any 290x specific revelations if anyone has them. I-14 didn't give me anything more than I-13, so I left it on 13.
|
|
|
|
Atrides
|
|
March 10, 2014, 08:52:12 PM Last edit: December 22, 2014, 01:31:57 PM by Atrides |
|
Some changes on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool Quality you can trust!
|
|
|
|
365Coin (OP)
Member
Offline
Activity: 112
Merit: 10
|
|
March 10, 2014, 09:16:04 PM |
|
Thanks to Siggi84 for creating the first blockchain explorer.. official one coming soon. Blockchain Explorerhttp://www.coincrawler.de/365/ (created by Siggi84)
|
|
|
|
BTCspoon
|
|
March 10, 2014, 09:37:25 PM Last edit: March 10, 2014, 10:04:57 PM by BTCspoon |
|
Thanks to Siggi84 for creating the first blockchain explorer.. official one coming soon. Blockchain Explorerhttp://www.coincrawler.de/365/ (created by Siggi84) Btw about the exchange you posted on the front page, you really should remove it. I tested with a few BTC, just for the sake of benchmarking it. Guess what? " MANUAL WITHDRAWAL!" 6 hours now...and still nothing, that mean the guy do it manually!, so if he is not around, sleep, die, or whatever, you'll never get your coins back... . So as said earlier avoid it like plague! Knowledgebase Pending withdrawal Posted by Peter Meverick on 08 March 2014 05:15 PM
Withdrawals are processed manually...
|
|
|
|
jsamul
|
|
March 10, 2014, 09:37:31 PM |
|
Some changes on DwarfPool 1. It's possible to separate your workers without changing the wallet-id now. This allows to get personal vardiff, if you have many rigs located behind stratum-proxy. To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER Example: HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2 HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3 The main way without number works as before. 2. Implemented a monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes. To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password. Monitoring works for each worker and IP separately. With WORKER_ID you can separately monitor your rigs. DwarfPool German quality you can trust! finally, thank you
|
|
|
|
|