tssk i wanted to change to mining onto litecoin or similar coins
however cgminer and bfgminer simply crash again

i used as command bfgminer --scrypt -I13 and this error shows when start the 32 bit version
 
Failed to init bfd from (d:\Miner\bfgminer-3.1.2-win32\bfgminer.exe)
0x417b73 : d:\Miner\bfgminer-3.1.2-win32\bfgminer.exe : [unknown file]
Failed to init bfd from (d:\Miner\bfgminer-3.1.2-win32\bfgminer.exe)
0x41d8f3 : d:\Miner\bfgminer-3.1.2-win32\bfgminer.exe : [unknown file]
Failed to init bfd from (d:\Miner\bfgminer-3.1.2-win32\pthreadGC2.dll)
0x6248671b : d:\Miner\bfgminer-3.1.2-win32\pthreadGC2.dll : pthread_create
Failed to init bfd from (C:\Windows\SYSTEM32\msvcrt.dll)
0x7732906a : C:\Windows\SYSTEM32\msvcrt.dll : ui64tow
Failed to init bfd from (C:\Windows\SYSTEM32\msvcrt.dll)
0x77329147 : C:\Windows\SYSTEM32\msvcrt.dll : iswalnum
Failed to init bfd from (C:\Windows\SYSTEM32\KERNEL32.DLL)
0x77b1850d : C:\Windows\SYSTEM32\KERNEL32.DLL : BaseThreadInitThunk
Failed to init bfd from (C:\Windows\SYSTEM32\ntdll.dll)
0x77d3bf39 : C:\Windows\SYSTEM32\ntdll.dll : RtlInitializeExceptionChain
Failed to init bfd from (C:\Windows\SYSTEM32\ntdll.dll)
0x77d3bf0c : C:\Windows\SYSTEM32\ntdll.dll : RtlInitializeExceptionChain

when using the 64 bit one nothing happens just see apllication stopped working in windows

eCTTWx6yxZYZaB8q9TeWgSfs3xQ1RzkZvP

sadly i can not get my machine to run either cgminer or bfgminer at any of the elephant or litecoin pools
somehow all miners crash except reaper but thats an old miner not very good anymore

I want to use my 7970 machines for mining on ltc since they are useless now on btc for that i have a small usb devices running fine on cgminer

So i wanted to run another instance of cgminer pure solo mining with litecoin
But whatever i do it simply does not start
the weirdest of all is when i take the old reaper it runs ok and found a block

my conf in use :
{
"pools" : [
{
"name: : "Local",
"url" : "192.168.178.12:9337",
"user" : "[USER].[WORKER]",
"pass" : "[PASS]"
},
{
"name: : "Coinotron",
"url" : "coinotron.com:3334",
"user" : "[USER].[WORKER]",
"pass" : "[PASS]"
},
{
"url" : "newlc.ozco.in:9332",
"user" : "[USER].[WORKER]",
"pass" : "[PASS]"
}
],

"intensity" : "18",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "21712",
"shaders" : "2048",

"gpu-engine" : "800-1000",
"gpu-fan" : "40-100",
"gpu-memclock" : "1200",
"gpu-powertune" : "10",
"gpu-vddc" : "1.100",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "75",

"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "1",

"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"scrypt" : true,
"kernel" : "scrypt",
"kernel-path" : "/usr/local/bin"
}

the error i get after start cgminer :
[2013-07-16 23:36:02] Probing for an alive pool
[2013-07-16 23:36:02] Network difficulty changed to 0 (769.9kh/s)
[2013-07-16 23:36:02] No suitable long-poll found for http://192.168.178.12:9337

then it crashes or when i use the command for run it from command line it instant crash

nah i changed that a few times to see if that was causing the problems in the coin conf i set the rpcport to the same port
do not forget reaper does run fine and made 4 blocks in the time it ran
however cgminer or bfgminer are much easier to control especially when i am at work on another spot
and secondly i think they can get more hashpower out of the card

I simply do not understand why cgminer and bfgminer stop working while reaper work without an issue
the error is related to not finding longpolling but i can not find any option to disable longpoll checking

i wanted to try run this on my pc in solo
but the weird part is i can't get cgminer 3.3.1 to run
it simply fails with pool not responding and longpoll error
 
the amazing thing is old reaper does run

here is my config file :

 {
"pools" : [
   {
      "name" : "elephant",
      "url" : "http://192.168.178.121:12337",
      "user" : "user",
      "pass" : "pass",
      "pool-priority" : "0"
   }
],

"expiry" : "120",
"failover-only" : true,
"gpu-engine" : "900",
"gpu-memclock" : "1200",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "21712",
"shaders" : "2048",
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",
"scrypt" : true,
"kernel" : "scrypt"

}

I am not sure if maxbtc.com should be in the list as a active pool
Since the pool op not responding and almost no real activity is on the pool anymore
I send a message about problems and untill now did not get any answer.
Nothing gets updated regarding the site its all the same old site as it was when it started.

I liked the pool alot because it stats, service and so on are great.
But the lack of a active operator and implementation of new tech like stratum spoils it so long as this is not changing i would avoid to use it

Euhm can not access triplemining website at all ??
The miner running balanced mining over 3 pools seems to have no issue
I like to add also that alot of so called co miners never ever mined longer then a few days or even seen them ever do anything
I also am missing a tool to kick non existing miners from the list of users on the sub pools
But to be honest i do not really trust the so called bonus also, i see it on names which i never ever seen in the miners list
And as long as i have mined on the pool never got the bonus also, even though i was long time one of the bigger miners
On the other hand i do not think the subpool system works besides for botnet users which can add hundreds of pc owners to the user lists making it easier to get the bonus
Since they all are in my few all fake users who make a change on that bonus.
Tell me who in his right mind does cpu mining with current difficulty on btc.... NOBODY

Ok the first i got and worked well

wget http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/libidn_1.25-1_arm.ipk

but the second did error again out

DiskStation> ipkg install -verbose_wget wget-ssl
Installing wget-ssl (1.12-2) to root...
Nothing to be done
An error ocurred, return value: 1.
Collected errors:
ERROR: The following packages conflict with wget-ssl:
         wget

So i just installed the succesfull received package which now ended succesfull
I see clearly that somehow for wget it message nothing to be done but for the wget-ssl it fails.

No no lol your missing the point

crosstools package totally not exits from the packages

goto the link provided as in my post and browse through the packages it is not there

the second error is because it can not find the needed crosstools

hence it error out

http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/ try to find the crosstools

As i was running the guide i got into some errors fairly quick

first error is :

Configuring tcl
Configuring zlib
An error ocurred, return value: 1.
Collected errors:
Cannot find package crosstool-native.
Check the spelling or perhaps run 'ipkg update'
ERROR: The following packages conflict with wget-ssl:
         wget
DiskStation> ipkg update
Downloading http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable
/Packages.gz
Inflating http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/P
ackages.gz
Updated list of available packages in /opt/lib/ipkg/lists/cross
Successfully terminated.

I tried again the update but it did not do anything other then after the reboot

second error comes when i try :
DiskStation> pkg-config --libs libcurl
Unknown keyword 'URL' in '/opt/lib/pkgconfig/libcurl.pc'

any and all other commands went fine and worked as should i seen no other errors
so i think the crosstool-native is not found or the name is wrong
I checked the page where the file should be and its not present at all

adding a queue size of 254 ultimately ends up the same in time bfg starts giving the messages as mentioned in my previous post
i got the jala running as well on bfgminer 3.1.2 and guess what lol after a day running fine it also started giving the same message even with a queue size of 254
however still not sure why bfg crashes sometimes without any message whats wrong

adding the following commands to the startup batch seems to helped me get it to run more stable but does not solve the underrun messages

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

Is jalapeno worth it : NO
you might end up with such a crap device as i have i sure as hell made a huge mistake doing business with bfl
the jalapeno i received looked ok when it started up and showed a 6000 Mh/s initial hash speed
every time i checked i saw bigger hw error numbers and the hashing speed kept going down and still is going down.
after a few hours i had dropped to 4700 Mh on average and today several days later is only makes 4400 Mh

lots of idiots say send it to BFL which most of the time not even respond to emails
they all forget that i live in the netherlands and believe me if they would ever respond normal i would loose another half year or more to get either the same crap back or get a replacement if i would ever get anything back
if i would have lived in the usa i would have sued them the second they did respond the way they did

Second soon the difficulty (about 2 to 3 days) goes up another 2 million at least so the time to get a block will be insane soon as well
So mining on small devices will get you maybe your investment in the device back
But if you want to get some money out of mining you need ASICMINER shares or a huge asic miner which does a big deal more on hash powers then what bfl is selling

zoals ik al in meerdere threads heb aangegeven
de jalapeno is 4.5 gh en niet 5  en ja ik heb zo een ding ontvangen van bfl
ik heb in een andere post al aagegeven het ding begon met 6000 Mh maar al na een paar uur was het al terug gelopen naar 4700
inmiddels haalt het ding nu gemiddeld 4400 Mh
voor dat er weer iemand begint te zeuren het ding is de met de heatpipes dus het laatste nieuwe ontwerp

ik zou deze eigenlijk ook willen flashen maar ben bang dat het dan slecht afloopt omdat het inmiddels al zo een lage hashrate heeft
overigens is het antwoord van bfl of deze niet defect is dat hij toch according to manufactor specs werkt

I just state that i fear if i try this with the allready bad performing device, it will make things worse instead it gives better hashes

Also tom99 you assumed incorrect my order was a sc single which would do 30Gh not a jalapeno and i paid enough to get 10 jalapeno's
Second its no use to contact them they simply refuse to listen nor answer and the costs for sending it back will up the losses even more
 

Well the crap jala i received from those bfl people is prolly not even worth trying to pump up

Which placed the very bad experience with BFL to an absolute -251 kelvin in my view

When it came out of the box it ran for a few minutes at 6000 Mh then all of a sudden it kept going down steadily
While the hashrate is going down the error rate keeps creeping up the scale

At the moment i get between 3900 to 4700 Mh, mostly around 4300

So even on stock this thing produces enough amounts of errors

While the temp according the readout not exceed 31 c, which looks to me cool enough to get decent results

Nevertheless to buy a programmer and spend lots of money just to try up one bad jala a bit might even spoil the short life this thing probably have even more
Which look to me the same choice as doing business with BFL.

well after adding the queue to 64 in the config i see it still fail [ staged work underrun error ] still given and constant

i wonder if its normal to need a buffer so big with just 2 x 7970 which do run on version 3.1.1 with a queue size of 0

anyway upped the queue to massive 254 to see how that runs

i get the feeling the program is slightly faster on these gpu's even while they are heavy underclocked

for me please 5 in the netherlands

currently testing bfg 3.1.2 on 2 x 7970 and am getting staged work underrun; not automatically increasing above 14 after it kept increasing the number till 14
any paramater which i can set in the config to give it more headroom ?
weird enough can not get 3.1.2 to run with the small jala, switched back to 3.1.1 which seems to run flawless
might have set wrong parameters in the .conf since i saw one posting his jala runs fine with 3.1.2
Are you using .conf to run bfg or do you run it plain with command line startup
Anyway when i start 3.1.2 it instant crash on my x64 win8

Ik ga ervan uit dat als het bedrijf vanuit zweden de apparaten verstrekt er mogelijk geen invoer rechten moeten worden betaald aangezien zweden tot de eu landen word gerekend.
Toch zal er inderdaad denk ik wel 21% btw worden geheven

Momenteel al 2 investeerders zich aangemeld