|
Indeed happens in firefox alot, this far have been lucky with chrome
but sadly the miner constant needs to be restarted after a few hours of good running
suddenly it runs for hours not submitting any shares also, cgwatcher is a pain to run the settings for this gs blades ....
now you would think the minerd would crash right after thousands on rejected but noooooooo it keeps running forever like this
countless hours lost on sumitting to be rejected shares
I think it would be wise to put a option in the image to auto boot after xx hours
The minerd also not able to do the auto tuning so in all the most stable for mining the gs blades is using the bfgminer 3.10 on a windows machine auto restarted every 6 hours
What a pain in the behind to keep the crap gridseed blades running .... the asicminer have been a pleasure to run compared to these gridseed blades.
The little zeusminer blizzards are now connected to my windows pc and i let cgwatcher check if they are dead again
Next time i wait till miners are sold and new victims iron out the crap till good miner software gets released or the people selling miners add a controller themselfs
This is ridiculous that each morning when i wake up i see the miners died again just after i went to bed, so 4 to 7 hours mining lost because i need my sleep as well.
The most annoying is that if you watch them like a hawk most of the time they run fine, till you turn your back to these things.
Then all of sudden they decided to crash or die
|
|
|
|
hmmm after a nice 4 hour run suddenly got this error : DataTables warning: table id=miner-table-details - Cannot reinitialise DataTable. For more information about this error, please see http://datatables.net/tn/3 |
|
|
|
|
I have been trying to get this working but whatever i do i see no accepted shares appear on pools
The miner shows 2.8 Mh being busy i notice hw errors, local shares going up, but the pools report 0.000000000 khash mined
I used 7 versions found and all the same nothing accepted in the miner or on the pool
The pow of the coin i was trying to mine is almost done and still no shares
The card a sapphire 7970, the commands i tried this far:
Have been trying 4 different x13 coins and all same result
sgminer -k marucoin (-o stratum+tcp://sum.suprnova.cc:port user settings ) -I19 -g 4 -w 128
sgminer -k x13mod and same settings
tried also -I 16 -g2 -w 256 or even tried changing the TC and shaders nothing changes
It looks like its hashing 2.4 to 2.9 Mh, but i get no accepted shares at all
At some pools the miner simply goes into idle mode reporting nothing todo
|
|
|
|
|
stunned here cpu miner works like charm
sgminer showing 2.9 Mh showing 0 shares at pools
mining on stratum+tcp://sum.suprnova.cc:3393
tried also some other pools and see same result gpu gets 0 shares
|
|
|
|
We ordered a couple of habanero boards from Peppermining These boards will get hot i decided to go with a fairly new watercooling complete solution Since i was not impressed by the performance of the corsair one we choose another solution. The one we decided to use is the coolermaster nepton 280l Unboxing video here The full album with the pictures made this far Habanero build pictures First you need to attach the radiator to the board which is done by our engineer Put the spacers where the screw holes are for the water block Apply the thermal paste on the waterblock and then put the watercooler block onto 4 cores of the Habanero If you would like your habanero to be mounted and prepared by our engineer you can contact me by pm Ofcourse you pay the postage, handling, needed parts and the time our engineer need to build and test the board If you want to buy a second batch Habanero and want us to fix the cooler then contact us first before order. After payement received you receive the address to send the boards to which you can put into the order form. |
|
|
|
|
screw this fraking coin, all my mined coins disappeared ?!?!?
and its stuck at 623 coins left also
|
|
|
|
|
holy smokes does this ever pay any coins
been mining with 24 Mh and no coins at all after 3 hours
|
|
|
|
Wooot got my first coins from Dev  Thank you , it no longer looks empty now  Imma rich i tell, muhhahahaha filthy rich Who want to buy the coin contact me for 111111111 btc |
|
|
|
|
can not mine direct at client ?!?
|
|
|
|
|
Working perfect on my 7970 this far no crashes
All cards should work if you use worksize 128 if intensity does not work for your card change it at will in your miner.conf file
You can name that file anything you like ( nonono.cat or yes-sir.boot whatever.yes) as long as you make sure to use the proper name with the start batch
The thread concurrency you can leave at "0" if your card does not start at first or leave it out.
Any parameter not put in the startup or config file will let the program use the normal one used for your card.
So if you do not know what is needed make the batch as simple as possible with only the kernel and poolinfo
example : " sgminer.exe -k x11mod -o mypool.com -u lazy - p x "
Make sure to fix the speed of memory and gpu to the speed your card can handle as well or leave those out completely that way you ensure also it starts
For faster heavy cards (7950,7970 and R9 280 and up ) we adjust the gpu-threads from 1 or 2 to 4 a 5850 can handle 2 threads
This should most of the time work for any card
"intensity" : "18",
"vector" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "0",
"gpu-threads" : "2",
"gpu-engine" : "800",
"gpu-fan" : "10-100",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"temp-cutoff" : "80",
"temp-overheat" : "70",
"temp-target" : "65",
"auto-fan" : true,
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "W:127.0.0.1,W:192.168.1.0/24",
"expiry" : "1",
"failover-switch-delay" : "10",
"failover-only" : true,
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
|
|
|
|
|
For those gettting low speeds on 79xx or 280/290 cards
my config does on my older 7970 - 2.9 Mh/s
@echo off
color 0E
timeout /t 12
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
export GPU_FORCE_64BIT_PTR=1
export GPU_MAX_HEAP_SIZE=50
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
sgminer.exe -o stratum+tcp://your.pool.here:8382 -u bronan.is.lazy -p NONONO -I 20 -w 128 -g 4 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 --no-submit-stale
|
|
|
|
|
How is it possible that i can not mine solo on the coin anymore
Why is solo mining blocked ??
|
|
|
|
|
I have tested the program and it works well
The only thing i would like to see fixed is the temp control missing
It has been running for 2 days stable as a rock no need for cgwatcher
And for you CHEAP bastards who do not want to pay a fee
Stop messing with the miner and go back to your old if you do not want to contribute
The program works and i do not have a problem giving that little 2 % to one who deserve it
|
|
|
|
|
Klintay
My order txid: 395b73a8dad9327708d8745198fd08e8d743bbde20f035a3aed48a754c62f7e8
|
|
|
|
|
Those are not offers they are jokes and ofcourse i do not take them serious
The 3 ants mine perfect and am making coins.
|
|
|
|
|
Sorry AndrewK,
I got 3 left for sale i will change OP
|
|
|
|
|
Hoi
Ik had niet door dat je dit had gepost in dit oude topic
Zal je even een pm sturen
Groet
|
|
|
|
|
the eu based ant is sold
and will move monday to its new owner
could not get it shipped before the weekends my contact by ups had a free day.
|
|
|
|
|
Prices for the ones in the US will include free regular UPS shipping, with tracking numbers. Insurance is extra.
|
|
|
|
|
Show Posts
