I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?
Click "File" -> Recieving addresses, it will show u your rec addresses. I see only new one address. No old addres. Not sure why it happened , i got all my addresses from old wallet in new one. If it doesnt matter for u , use new created one. I'm created full backup "lux" directory before start updating. Deleted all files except wallet.dat Start new wallet v.4. What did I do wrong? U did good, maybe forgot to add this lux.conf with peers inside for more faster syncing https://cdn.discordapp.com/attachments/364500397999652868/410243591391412224/lux.conf, but while u synced it doesnt matter. This is the first thing I did. It turns out that I lost everything that has been mining the last 20 hours? Again, u are good, if u upgraded and synced u'll see what u mined. |
|
|
|
I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?
Click "File" -> Recieving addresses, it will show u your rec addresses. I see only new one address. No old addres. Not sure why it happened , i got all my addresses from old wallet in new one. If it doesnt matter for u , use new created one. I'm created full backup "lux" directory before start updating. Deleted all files except wallet.dat Start new wallet v.4. What did I do wrong? U did good, maybe forgot to add this lux.conf with peers inside for more faster syncing https://cdn.discordapp.com/attachments/364500397999652868/410243591391412224/lux.conf, but while u synced it doesnt matter. Can anyone answer when or how we will get PoS in a wallet?
Staking be active from block 180k. |
|
|
|
I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?
Click "File" -> Recieving addresses, it will show u your rec addresses. I see only new one address. No old addres. Not sure why it happened , i got all my addresses from old wallet in new one. If it doesnt matter for u , use new created one. |
|
|
|
I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?
Click "File" -> Recieving addresses, it will show u your rec addresses. |
|
|
|
The upgrade went well and synced after using the lux.conf file provided. However I tried to withdraw money from my mining address which had 0.85 LUX from many transactions and until now the balance has not appeared on the target address.
I used the default transaction fee recommendation of ~ 0.0002 LUX. It still appears as unconfirmed on wallet. What can I do?
From where to u sent your coins? |
|
|
|
What happened to the lux sent last night at 10pm to cryptopia?
If you send coins to Cryptopia from a v3 wallet, they will not show up because they are on v4. When you upgrade to v4 you will see the tx show as rejected and you will still have your coins! Please do NOT create support tickets on Cryptopia! |
|
|
|
Would like to know how and when do you plan to list on other exchanges.
No ETA still about new exchanges, but after new wallet out our marketing guys and CEO fully focused on. Just false\positive alarm due to POS miner inside. Ignore it. |
|
|
|
From discord @everyone - Daily Reminder #1175 - Upgrade to wallet 4.0.0a is mandatory ( https://github.com/216k155/lux/releases/tag/v4.0.0) - Without this, you wont be able to send your coins to the exchange or receive coins from the pools. All our pools and exchanges now run 4.0. - Backup your wallet.dat. keep it safe, in a few places! If you Upgrade and install without backing up your wallet.dat, you will lose your coins. Without a backup, you cant recover them. - Delete everything else from your Lux Folder (after wallet.dat has been backed up). Then Install your 4.0.0 wallet (Lux folder is under the /Appdata /Roaming folder in windows and under Library/Application Support/ in Mac) - Once installed, replace the new wallet.dat with the backed-up wallet.dat (the one with your coins in it). - Restart wallet, Let it Sync. Sync takes time (Repeat after me, Sync takes time). Finding peers take time. So once you install, sit back and relax a while - If you have waited for a considerable amount of time (30 mins - 1hr) and nothing works , use the lux.conf file pinned to #wallet channel. Download and drop it into your Lux Folder. Wait for sync. Again- give it time! - You are now synced and ready to go! Also, some pools experiencing issues currenty, use ones below https://www.omegapool.cc/http://antminepool.com/ https://pool.coin-miners.info/https://futurecoins.clubWill be keeping updated. |
|
|
|
Yes, it's fully synced. Everything looks fine.
The problem maybe is that - when I was sending I didn't added nodes yet. So it was fully synced but I had 0 connections to network (I noticed it after transaction).
So I sent LUX, then noticed that there are zero connections, closed it, added nodes, now I have connections to network but still 0 confirmations for transaction.
Is there a way I can rollback stucked transaction?
UPDATE - I have 1 confirmation. After one hour exactly. Not greatest speed I must say.
Thats why always make sure that u r fully synced with network before sending coins  |
|
|
|
Excuse me, but wtf is going on?
I've upgraded to newest wallet, added nodes, I have 6 active connections now.
Then I sent LUX from wallet to cryptopia. 40 minutes ago. Still I see:
Состояние: 0/unconfirmed
Дата: 06.02.2018 20:04
To: Cryptopia LQiXFG4249e74ExTSam2YsgEXpVh3FmWBf
Debit: -40.64000000 LUX
Transaction fee: -0.00077668 LUX
Net amount: -40.64077668 LUX
Transaction ID: 57018c1487126bd064c1ef885b06ecbd5a313c2cf83e54d9579b1b4a41e01002
Output index: 0
No confirmations, no LUX on wallet, no LUX on Cryptopia, nothing.
did your wallet fully synced? |
|
|
|
Staking is not active new wallet 4.0  can disable Multisend ? Staking not active till block 180k. |
|
|
|
It doesnt seem to connect at all. I close it and i open it and wait more than 10 minutes...red radar. I did as you said. Backup my old wallet.dat file, deleted all the other files and run the file. I dont know if I did something wrong because each time I close the wallet...after the message "luxcore is shutting down", another message pop ups that says "a fatal internal error has occurred. see debug.log for details"
Try to do it from scratch: before running the wallet "4.0" make sure do you the follow Download Link: https://github.com/216k155/lux/releases/download/v4.0.0/lux-qt-wins.zip1 - close current wallet 2 - go to the lux folder where you all your files, follow the steps below 3 - press windows logo + R on your keyboard "this will bring a small run window" type the below info or use the folder explorer https://i.imgur.com/VJtkdvK.pnglocation %appdata%\Lux or C:\Users\UserNameHere\AppData\Roaming\Lux 4 - remove all the files located on the LUX folder with the exception of the wallet.dat 5 - make a wallet.dat backup for safe keeping 6 - download lux.config https://cdn.discordapp.com/attachments/396632784854319115/410156251985477633/lux.conf7 - move the lux.config to the location %appdata%\Lux 8 - start new wallet and watch the magic happen ! Also give more time to catch up with net in first syncing |
|
|
|
all pools were asked to withhold payments for a few hours as we cut over to the new v4 as a precaution - payments from all pools will resume soon
please ensure you have upgraded to the v4 wallet
Will a v3 wallet still work wallet to wallet or with mining pools? With mining pools - no, v3 to v3 for some time yes, but in the end all chain will be v4 based and v3 will be done, so make sure to upgrade to v4 wallet ASAP. |
|
|
|
Do you need to add the nodes to the config file in the new wallet or was that for the old?
No need |
|
|
|
|
Futurecoins, Altminer, Yiimp, Unimining, and OmegaPool pools currently updated, others in work.
+ Antminepool on track
|
|
|
|
PLEASE DELETE THE CONTENTS OF YOUR LUX FOLDER, ONLY KEEP WALLET.DAT.
FYI, the release notes recommend keeping lux.conf as well: Delete everything from your Lux folder (except wallet.dat and lux.conf)Any ideas on where these files are stored in a windows 10 PC. My old Lux wallet folder has neither of those files. c:\Users\user_name\AppData\Roaming\Lux\ |
|
|
|
Is there version 4.0 built for Windows? I see only sources for 4.0 and no binaries for 3.0.5
Wallet 4.0 not live yet, latest one still 3.0.4 Pools will be down for maintenance, stay turned . |
|
|
|
Notice "In preparation for upgrade and ensure network is safe our Cryptopia wallet will go into maintenance mode soon. Trading can still take place but you won’t be able to transfer/withdraw $Lux coins. We are really excited to bring you this upgrade!" https://twitter.com/LUX_COIN/status/960498157875531776Maintenance expected to at least 12 hrs. |
|
|
|
My qt wallet does not sync anymore Add nodes addnode=128.199.135.156:28666 addnode=13.67.142.19:28666 addnode=185.43.109.228:28666 addnode=198.13.35.29:28666 addnode=207.246.108.239:28666 addnode=209.250.238.48:28666 addnode=45.58.62.189:28666 addnode=45.63.25.110:28666 addnode=45.77.129.203:28666 addnode=52.168.20.129:28666 addnode=54.39.20.230:28666 addnode=95.174.205.229:28666 Thanks ! But in wich file ? Add it to lux.conf that can be found in %appdata%\Lux folder. If there not exist that file so create text file and name it "lux.conf". |
|
|
|
|
Show Posts
