LUXCoin—New PHI2 PoW/PoS Hybrid—SC—SegWit—PrivateSend—PoS Web Wallet—LuxGate

[lupanar]

I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?   

Click "File" -> Recieving addresses, it will show u your rec addresses.

I see only new one address. No old addres.

Not sure why it happened , i got all my addresses from old wallet in new one. If it doesnt matter for u , use new created one.

I'm created full backup "lux" directory before start updating.  
Deleted all files except wallet.dat
Start new wallet v.4.

What did I do wrong?

U did good, maybe forgot to add this lux.conf with peers inside for more faster syncing https://cdn.discordapp.com/attachments/364500397999652868/410243591391412224/lux.conf, but while u synced it doesnt matter.

Can anyone answer when or how we will get PoS in a wallet?

Staking be active from block 180k.

[1714903060]

1714903060

[1714903060]

1714903060

[1714903060]

1714903060

[1714903060]

1714903060

[dr_sergeus]

I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?  

Click "File" -> Recieving addresses, it will show u your rec addresses.

I see only new one address. No old addres.

Not sure why it happened , i got all my addresses from old wallet in new one. If it doesnt matter for u , use new created one.

I'm created full backup "lux" directory before start updating.  
Deleted all files except wallet.dat
Start new wallet v.4.

What did I do wrong?

U did good, maybe forgot to add this lux.conf with peers inside for more faster syncing https://cdn.discordapp.com/attachments/364500397999652868/410243591391412224/lux.conf, but while u synced it doesnt matter.

This is the first thing I did.
It turns out that I lost everything that has been mining the last 20 hours?

[lupanar]

I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?  

Click "File" -> Recieving addresses, it will show u your rec addresses.

I see only new one address. No old addres.

Not sure why it happened , i got all my addresses from old wallet in new one. If it doesnt matter for u , use new created one.

I'm created full backup "lux" directory before start updating.  
Deleted all files except wallet.dat
Start new wallet v.4.

What did I do wrong?

U did good, maybe forgot to add this lux.conf with peers inside for more faster syncing https://cdn.discordapp.com/attachments/364500397999652868/410243591391412224/lux.conf, but while u synced it doesnt matter.

This is the first thing I did.
It turns out that I lost everything that has been mining the last 20 hours?

Again, u are good, if u upgraded and synced u'll see what u mined.

[dr_sergeus]

I'm upgrade wallet to v.4
And now I don't see in "Receive" my old address for receive mining payments.
Now I can't receive payments from pools?  

Click "File" -> Recieving addresses, it will show u your rec addresses.

I see only new one address. No old addres.

Not sure why it happened , i got all my addresses from old wallet in new one. If it doesnt matter for u , use new created one.

I'm created full backup "lux" directory before start updating.  
Deleted all files except wallet.dat
Start new wallet v.4.

What did I do wrong?

U did good, maybe forgot to add this lux.conf with peers inside for more faster syncing https://cdn.discordapp.com/attachments/364500397999652868/410243591391412224/lux.conf, but while u synced it doesnt matter.

This is the first thing I did.
It turns out that I lost everything that has been mining the last 20 hours?

Again, u are good, if u upgraded and synced u'll see what u mined.

My wallet is fully synchronized.
All transactions history that were on the old wallet - I see in a new wallet
But I did not see the old addresses in "File" -> Recieving addresses
Only one new.

UPD. I don't have any "previously used address" too.

[lupanar]

My wallet is fully synchronized.
All transactions history that were on the old wallet - I see in a new wallet
But I did not see the old addresses in "File" -> Recieving addresses
Only one new.

UPD. I don't have any "previously used address" too.

But why to hell u need those old addresses?!  Use the new one, thats all!

[cezar.crypto]

The upgrade went well and synced after using the lux.conf file provided. However I tried to withdraw money from my mining address which had 0.85 LUX from many transactions and until now the balance has not appeared on the target address.

I used the default transaction fee recommendation of ~ 0.0002 LUX. It still appears as unconfirmed on wallet. What can I do?

From where to u sent your coins?

All transactions I performed from the new wallet (qt 4.0.0a).

Update : I started again the wallet with the sending address and kept it running for half an hour or so. The transaction got confirmed.

Thanks.

@lupanar - does the default fee 0.0001 LUX / kB need changing to make the transaction faster or is this a good value? Also if I have many inputs in the balance will this increase the transaction fee?

Regards,
Cezar

[lupanar]

The upgrade went well and synced after using the lux.conf file provided. However I tried to withdraw money from my mining address which had 0.85 LUX from many transactions and until now the balance has not appeared on the target address.

I used the default transaction fee recommendation of ~ 0.0002 LUX. It still appears as unconfirmed on wallet. What can I do?

From where to u sent your coins?

All transactions I performed from the new wallet (qt 4.0.0a).

Update : I started again the wallet with the sending address and kept it running for half an hour or so. The transaction got confirmed.

Thanks.

@lupanar - does the default fee 0.0001 LUX / kB need changing to make the transaction faster or is this a good value? Also if I have many inputs in the balance will this increase the transaction fee?

Regards,
Cezar

TX fee depends of sending amount, more to send - more fee. In most of cases default 0.0001 fee is good enough.

[soisanma146]

hi dev, do you plan to list LUX on big exchanges like bittrex, binance, okex? if you are working on listing, so when ?

[Riptide_NVN]

Sweet back to mining now on BSOD.

So much for 0% fees.   

[ztaz]

Here we are - the transaction was lost 2598f4f563db64ae2fc1f8487de2e2651e1e739882278177bfdc369b83197f43
just during this mess went away from the pool AltMiner.net, how to contact the pool - it is not known. In the explorer, the transaction is not displayed.
the following transactions are displayed and have already arrived, and this is gone

[speed79]

i downloaded the new wallet but when i open it for it sync it saying down the bottom no block source avalabile!! is it normal or for some reason its not connected  ?

[lupanar]

Here we are - the transaction was lost 2598f4f563db64ae2fc1f8487de2e2651e1e739882278177bfdc369b83197f43
just during this mess went away from the pool AltMiner.net, how to contact the pool - it is not known. In the explorer, the transaction is not displayed.
the following transactions are displayed and have already arrived, and this is gone

Join to discord and ask pool-owner directly https://discord.gg/CAWwbuY

i downloaded the new wallet but when i open it for it sync it saying down the bottom no block source avalabile!! is it normal or for some reason its not connected  ?

Add nodes below to lux.conf in %appdata%/Lux folder and wait for syncing, can take for a while.

addnode=176.32.5.50:26868
addnode=198.91.220.149:26868
addnode=212.253.248.210:26868
addnode=217.101.193.61:26868
addnode=219.75.75.71:26868
addnode=24.8.183.131:26868
addnode=45.76.118.90:26868
addnode=66.160.165.8:26868
addnode=73.160.169.87:26868
addnode=74.58.249.254:26868
addnode=78.124.167.38:26868
addnode=78.243.65.55:26868
addnode=81.108.220.210:26868
addnode=85.253.146.172:26868
addnode=94.29.245.244:26868

[Ultrasonik]

I found a solution to the no syncing (no block source avalabile) !
I once managed to connect, but friends did not succeed (add nodes did not help).
Then I copied them my well working peers.dat and it all started working right away!  
my peers.dat - 300 Kb  ( I can send to your mail my  peers.dat  ).  

If my information saved your nerves I will be grateful for the coin. )
my wallet LUX
LTgPW8LBtqCE8fNEEkpYYmvfF1gGjdT83i

(Sorry for bad english )

[speed79]

Here we are - the transaction was lost 2598f4f563db64ae2fc1f8487de2e2651e1e739882278177bfdc369b83197f43
just during this mess went away from the pool AltMiner.net, how to contact the pool - it is not known. In the explorer, the transaction is not displayed.
the following transactions are displayed and have already arrived, and this is gone

Join to discord and ask pool-owner directly https://discord.gg/CAWwbuY

i downloaded the new wallet but when i open it for it sync it saying down the bottom no block source avalabile!! is it normal or for some reason its not connected  ?

Add nodes below to lux.conf in %appdata%/Lux folder and wait for syncing, can take for a while.

addnode=176.32.5.50:26868
addnode=198.91.220.149:26868
addnode=212.253.248.210:26868
addnode=217.101.193.61:26868
addnode=219.75.75.71:26868
addnode=24.8.183.131:26868
addnode=45.76.118.90:26868
addnode=66.160.165.8:26868
addnode=73.160.169.87:26868
addnode=74.58.249.254:26868
addnode=78.124.167.38:26868
addnode=78.243.65.55:26868
addnode=81.108.220.210:26868
addnode=85.253.146.172:26868
addnode=94.29.245.244:26868

THNX, it start to sync now. once it synce should be able to see my old balance?

[ztaz]

Here we are - the transaction was lost 2598f4f563db64ae2fc1f8487de2e2651e1e739882278177bfdc369b83197f43
just during this mess went away from the pool AltMiner.net, how to contact the pool - it is not known. In the explorer, the transaction is not displayed.
the following transactions are displayed and have already arrived, and this is gone

I answer myself. can someone else come in handy. the representative of the pool AltMiner.net said - that all the coins for this transaction were lost along with the transaction

[btcgreen63]

THNX, it start to sync now. once it synce should be able to see my old balance?

Yes, once it is synced your balance should show. This worked for me. I had mined LUX with the old protocol. After installing the new wallet and syncing, it correctly showed my balance.

Keep in mind, just like with most cryptocurrencies, your balance is determined by the distributed blockchain, not your wallet. Your wallet is just querying the blockchain. You can check your balance by using LUX blockchain explorers like this one:

https://chainz.cryptoid.info/lux/

The importance of the wallet (in the wallet.dat file) is that it keeps your private keys so you can spend the money when you choose to do so.

[Sushio]

LUX is on Poolr

https://poolr.io

No fees until March!

US hosted server!

-a skein -o stratum+tcp://poolr.io:4933 -u YOURWALLETADDRESS.rigname -p x -R 5

Discord: https://discord.gg/XwmgRdU

Team Poolr welcomes you!

[btcgreen63]

LUX is on Poolr

-a skein -o stratum+tcp://poolr.io:4933 -u YOURWALLETADDRESS.rigname -p x -R 5

Of course, put "phi" there instead of "skein" for mining LUX.

[gscotch]

bsod and altminer are on different chains again, yiimp is trying to resync again.
Epic fail?

temporary difficulties. now everything looks fine I guess

[Bender957]

now pools will die every night?

great job devs