Your first two links are broken. Page reports "bad request" And it's not surprise with the in your face ranting you are doing which isn't healthy that KNC has decided to ban you from their site. It's OK we all get your up set with KNC's products and that you feel by the looks of it that you need to be compensated in some way, but I recommend you do it is a constructive way. Thanks, |
|
|
|
wtf my bonus Neptune still not even sent!!
Seems like the bonus neptune was a promise meant to gain some positive publicity, to placate initial buyers in the hope they wouldn't seek refunds and to assure would-be purchasers of their newer devices that they were a company with a conscience; a company you could trust to do the right thing. I believe that you will eventually get a bonus neptune or a reasonable facsimile of the same but it will be on their terms which are generally non-specific and predictably mutable. Batch 3's still haven't been shipped out yet so there is a reason why the 2nd Neptune hasn't been shipped.  |
|
|
|
Just like all the resellers to be aware of KNC reseller strategy.
Any reseller who didn't hit the 10 total sales on a specific miner won't get any compensation no matter how close their target is.
This is going to be the last time I deal with KNC ever again.
Where have you been for the last year or so? This topic has been talked about in this thread then...so this is nothing new. |
|
|
|
wtf my bonus Neptune still not even sent!!
Really? Are the Batch 3 Neptune's shipping yet? I don't think so! So wait until they are, as KNC has already stated the 2nd Neptune's won't be shipped until Batch 3's are being shipped. |
|
|
|
|
I am finding that I hashing fine but most times the estimate change doesn't move for more than 5 hours. Something doesn't seem right. I have checked my neppys and they are all say their are hashing at 3.4TH/s so I just don't get it.
|
|
|
|
Man people sure do freak when the stats aren't perfect...
Anyway, the double orphaned blocks caused a failsafe and the system is recomputing data and catching up as a result. No worries, as usual.
Thanks for the update! |
|
|
|
Must be getting a lot bad blocks over the last couple of days because my status show a flat line on the maximum reward graph, after 1/2 a day to a day it starts moving up again.  I guess the status page is temporary broken, after what happened earlier (15h ago or so). No reason to hop pools IMHO. I'm seeing the hashrate averages stuck at the same values since this morning, no matter what the interval are they calculated over. I guess your charts follow the stuck values. Later Edit: Everything is frozen there, including the balance, .. we hit a block 18 minutes ago and there are no changes in the stats, except the round duration. Yes your right!! I hope they fix their server soon! |
|
|
|
Raspberry pi performance should not be the issue, since Bitfury made miners with hundreds of gigahashes using raspberry controller. Software can be causing low performance though.
Titans put a hell of a lot more stress on the CPU than old Bitfury rigs. BBB's are the way to go for more powerful miners. Also be sure to have a good SD card. My Bitfury rigs had constant corruption problems with the crappy SD cards that Bitfury supplied. Once I replaced them with high quality cards, my problems went away. Get a bigger card. ScanDisk makes a 512GB SDHC card now. |
|
|
|
Must be getting a lot bad blocks over the last couple of days because my status show a flat line on the maximum reward graph, after 1/2 a day to a day it starts moving up again. |
|
|
|
well for those of you with problems with bfgminer restarting and cubes...there is something I read about the Titan working well on the liteguardianpool pool and that pool having an asic ready port on it you can toggle...and someone with a Titan said they used it and it works to solve the problem no idea what thread it was obscure anyway that and his titan was pulling 1550? w at the wall and he is uing 1300w power supplies so with that over kill he managed to get 300mh out of his cubes with that and other tricks here is the link just found it https://litecointalk.org/index.php?topic=22290.msg0#newanyway hope this helps you all ..my Titan is not here yet....expect to hear me howl as well on here soon (all frigging rocket science on here I can barely put an Ikeda Swedish end table together and am expected to put a damn Swedish DIY Titan together. This is gonna drive me nuts!) Looks like the Titan miner firmware is pretty much the same at the Neptune. My guess would be if someone goes into Advanced they should see what the power consumption is. On my Neppy at 475Mhz its consuming 1450W so it says but I know its consumes about 1450~1600W. If I stick on a single 15AMP circuit the breaker goes, but everything is good on two 15AMP circuits. |
|
|
|
|
I figured out my issue. I had bitcoin installed ages ago and was pretty sure I uninstalled but but I guess not. What I was doing was opening the 32bit version, as soon as I opened the 64bit version I could the 0.9.3
The now real issue is in 0.9.3 for windows x64 doesn't have an address book. I can't see my addresses, so I wanted to send someone bitcoins I would basically be screwed because I can't retrieve my wallet ID.
I sent as a set some bitcoin from another wallet to my bitcoin one (the same ID I had in the 32bit one) and coins are coming in but everything is kept secret I can't see where it's coming from. When I try to add my ID back to the 0.9.3 it comes back and say that Wallet ID is already in your address book. (which I can't see).
Bug? I don't know.. but you shouldn't be stopping people from seeing their Wallet ID's.
|
|
|
|
But any of you coins gone?
Status: 193 confirmations
Date: 9/27/2014 02:23
To: 17ns8ggpV2SrUXvZwVkCPcGTGNjPUPSjL
Debit: -12.3380244 BTC
Transaction fee: -0.0003 BTC
Net amount: -12.3383244 BTC
Transaction ID: f9b0e5f573b410225d3519759263c12e859d4728d9ebfda0edbe03b3dcd96c90
It would look like that bitcoin-qt transferred your bitcoins to a new wallet as part of the update possibly? I would write an issue here - https://github.com/bitcoin/bitcoin/issues - and see what the response it. |
|
|
|
But any of you coins gone?
Status: 193 confirmations
Date: 9/27/2014 02:23
To: 17ns8ggpV2SrUXvZwVkCPcGTGNjPUPSjL
Debit: -12.3380244 BTC
Transaction fee: -0.0003 BTC
Net amount: -12.3383244 BTC
Transaction ID: f9b0e5f573b410225d3519759263c12e859d4728d9ebfda0edbe03b3dcd96c90
Did you encrypt your wallet using a secure password? I used grc.com/password on all my wallets. Steve Gibson's algorithm never generates the same password twice so even if someone managed to hack his site and steal the algorithm it would take them many lifetimes and far more of the total of computing power of the bitcoin network hack my passwords! He claims 255 do the power of infinity. |
|
|
|
I downloaded bitcoin-0.9.3-win64-setup.exe 27-Sep-2014 07:33 12224864. Shutdown the client and ran the update. It crashed and upon the restarting the upgrade started to rebuild the chain. I was a couple of weeks behind as well. Just checked and my coins are gone. I am not even sure where to start. The client version shows 0.8.6-beta. If anyone's willing to help me out I'd greatly appreciate it.
I in the same boat as far as the version number goes; the client version show 0.8.6-beta for bitcoin-0.9.3-win64-setup.exe. It didnt' crash on me as I had uninstalled Bitcoin-QT ages ago from myself. I make sure the old folder and old registry keys weren't still in my system when installed 0.9.3 |
|
|
|
|
Did something happen to the connection at Eligius 12 hours or so ago? I noticed my miner just failed over to my other connection. Checking PRTG I don't have any indication my connection dropped off.
|
|
|
|
|
If I run Bitcoin-QT with core 0.9.3 installed does it say 0.8.6 beta still or is it supposed to say 0.9.3? If it's supposed to say 0.9.3 what do I need to do to correct this?
I am running windows 7 x64 and have installed the Win64 version of 0.9.3 core after shutting B-QT down and waiting 5 minutes.
Thanks,
|
|
|
|
Hey maybe KNC have been kidding us all along and its a 3.3Ghs scrypt miner
~L)L~
That would be nice but it's very unlikely as they wouldn't be screwing anyone.  |
|
|
|
NMC setup?
I put my address in the address field but after hitting saved changes! it says that my signature fails? When I exit out and go back into My Eligius it shows my NMC field blank again? Is this normal?
I have tried it in Chrome, Firefox, and IE 10 and gotten the same results each time.
Have you signed the message with your BTC-payout address? I never signed any message, I have only used my BTC address to start mining and never have made changes to any of the settings on the config settings page. |
|
|
|
Nope. It is producing gigahashes of rejects.  Well first of all the Titan doesn't ship being able to do even 1GH/s. So either you are running multiple Titan's or something has gone terribly wrong. |
|
|
|
|
NMC setup?
I put my address in the address field but after hitting saved changes! it says that my signature fails? When I exit out and go back into My Eligius it shows my NMC field blank again? Is this normal?
I have tried it in Chrome, Firefox, and IE 10 and gotten the same results each time.
|
|
|
|
|
Show Posts
