Lol , the OP is making offers to buy a Z11. They are in the same price range . Why would he be trying to buy one and sell his at the same time ? I'm sick of people trying to take advantage of people.
they are also selling/buying on their alt as well - maybe trying to scam for money in sales? and get miners sent as well in purchases? but with no intent to pay and/or deliver? |
|
|
|
|
this is a kind gesture for those with the high post count but lacking in merit needed to make the next level. I was able to go thru here and give merit as well to a few posts as well. may do some more reading and give out some more as well.
|
|
|
|
So, I have been mining on Kano with a T9+ and learning this 5Nd thing for a month now and was not even close to getting to the 10.5TH ramp up; I went ahead and "helped it" with a 2nd T9+ and a Bitfily B1+ (Total of 34TH), now my Shift Graph shows roughly the same as the single miner.
Does this mean at next payout I can expect the "full" share of the single 10.5TH miner?
Is this way of ramping up quickly ok?
this effect is the same - as you were ramping up to 10.5 th/s you now have to ramp up to 34 th/s but yes, what your shift graph shows as your average should be what you get paid for. |
|
|
|
You can't provide it as a service if you don't make a little $ doing it. If you don't do it, then someone else is going to get screwed because they can't find a reliable escrow.
So, you are actually doing the community a service even if your prices are higher.
You could charge 5%-20% depending on the size of the deal and no one will blink an eye, because it's YOU they trust.
Raise your rates, so that people can continue using your services! Otherwise, you'll burn out and no be able to be of any help to the community.
I agree with the above, leave the 1% and 2% to us noob escrow providers  Though I doubt I will get any business even with a lower rate until my trust rating is higher. |
|
|
|
Philip, you need to raise your escrow rates so it's more worth while to you.
OP... "My husband had a heart attack and is in ICU at this time". You won't believe how many times something like this comes up in the mining industry when it comes time for a buyer to cough up the funds. There is always a wild excuse as to why someone missed the contractual deadline and missed out on an opportunity.
or when they said they had no internet all night so could not post the tracking yet was commenting on other posts at the same time they supposedly had no internet lol |
|
|
|
Hello i have 3 S17 miners for sale and shipping from Romania.
Price - 3190€
Can use a trusted escrow
is that the price for all three or each one separately? Each One so $3569 each? let me know when price gets lower. |
|
|
|
Just wanted to share a bit of good news that happened to me today (and for anyone that has an old Antminer R4) this info could potentially help.
I had an unexpected good event happen on one of my miners today - my old Antminer R4 - you see a lot of them processing at half rate (4THs instead of 8THs) because one of the two hash boards 'goes bad'. Well that happened to me over 8 moths ago on my R4 and today after a power brown-out my other miners never missed a beat and stayed online working away while the R4 appeared to be working (with one board @ 4THs which it has been for the last 8 months and many hardware reboots) but on Kano.is was showing it wasn't processing any shares and hadn't been for over 19 hours. Usually I do a HARDWARE reset by shutting off the main power supply and turning it back on & that resolves the issue. However this time I instead forced a soft reboot in the Miner Configuration Web GUI, and to my surprise - WOW - the 2nd hashing board CAME BACK TO LIFE! Now the old R4 is back to processing at over 8THs! Just thought I'd share some good mining news. Have a good one & mine on with KANO!
nice and congrats! hope it stays running for you! |
|
|
|
Sent the log to Bitmain, They told me to send the whole thing back.......they won't tell me what exactly is wrong with the machine. They just said its defective.
sending back sucks though. so much lost time and btc |
|
|
|
is kano.is down? I cannot get the page to load.
**EDIT**
nvm - figures as soon as I post that it comes back up lol
There were network delays at the web server for a couple of minutes just after 14:00 UTC But they resolved themselves pretty quickly so I didn't have to find out what was going wrong. Seemed to be all OK after that, but I guess you might have seen a hiccough after that caused by whatever caused it in the first place. yea it was only a brief few minutes - just happened to be when I was trying to look at it |
|
|
|
|
is kano.is down? I cannot get the page to load.
**EDIT**
nvm - figures as soon as I post that it comes back up lol
|
|
|
|
AM is now reporting LTC with a 544.04 value - can we pick the exchange that gets used? for both the ticker down below and for the profit per day calculations?
it is also reporting bchsv as having a daily revenue of $3,696.39 - it should be more like $205 range
Right now there is only a concept of priority order for coin statistics sources (see the Options dialog, Statistics Provider section) and it could be that for example CoinCalculators reported incorrect value for a while. By changing the priority you may resolve a temporary issue like this. the ticker at the bottom is not using coincalculators.io - it says it is based on Escodex - which is not on the Statistics Providers page. as for calculating my profit, I am not sure which one it is using. Per coincalculators website, I should be averaging about $7.50 a day for LTC - per AM my per day rate is $11.50 per machine or $34.50 per day. If you for example put WhatToMine on top of CoinCalculators.io in the list, you will see that it most likely will load other exchanges. On the same configuration page you can also configure an Exchange Volume Filter, to exclude low volume exchanges that typically cause these problems. By setting a minimum volume to 0.01 or 0.001 BTC it's more likely to get realistic numbers. I'm considering to set a minimum exchange volume value by default on new installations, to avoid these issues. Please also note that Awesome Miner uses the Current coin statistics by default, while the web interfaces of the providers like CoinCalculators may use 24h average values. ahh ok I did move the one up and it changed it to more accurate values. Though now I miss it telling me that my LTC miners were making $35 a day, even if it wasnt real lol |
|
|
|
I don't want to discourage you, but it will be difficult for you to get customers. We have many experienced and trusted users providing escrow services and most people prefer to choose them. But offcourse, there are few exceptions from the rule. For example shasan who is relatively new here, but he managed to buil his reputation and now is providing escrow and money lending services successfuly. Good luck  I understand that, I am not reliant upon getting customers but just wish to offer the availability should the need present itself. I will be buying/selling equipment over time so my trust level will continue to increase. |
|
|
|
lol. Good luck buddy. You will need it  Of that I have no doubt. I will work at increasing my trades here but in the meantime, I will still offer my services. I am not doing it to make a profit - only to serve the community. So, if I get no business, I will not be upset or at a financial loss for it. |
|
|
|
AM is now reporting LTC with a 544.04 value - can we pick the exchange that gets used? for both the ticker down below and for the profit per day calculations?
it is also reporting bchsv as having a daily revenue of $3,696.39 - it should be more like $205 range
Right now there is only a concept of priority order for coin statistics sources (see the Options dialog, Statistics Provider section) and it could be that for example CoinCalculators reported incorrect value for a while. By changing the priority you may resolve a temporary issue like this. the ticker at the bottom is not using coincalculators.io - it says it is based on Escodex - which is not on the Statistics Providers page. as for calculating my profit, I am not sure which one it is using. Per coincalculators website, I should be averaging about $7.50 a day for LTC - per AM my per day rate is $11.50 per machine or $34.50 per day. |
|
|
|
Just this week alone I have seen couple of newbies offering their service as Escrow in which I find fishy since we have already many Escrow here that has been around for longtime now and had successfully deals multiple times
But of course new players must be welcomed and can established their own name to be legitimate in future,looking at your account is enough to find that you are serious about this
All I can say is goodluck mate and hope you’ll find client soon
Thank you. I might only initially get interest from those I have worked with but hopefully it builds - if nothing else, it provides another option to those here on the forums. I had talked with one of the escrow providers here and they told me to go ahead and offer my services, so I am. You should consider first getting more trading experience around here before starting offering your own escrow services. In general, you should show a fairly long trading history before offering escrow services. In addition to showing that you can be trusted to handle others' money, you need to show you have the experience to mediate any possible disputes.
I get that - I mean I could just go buy an advanced account like a lot of others have or I could just escrow my own deals between an alt like others have - but I think I will keep doing what I am doing and offer the service to anyone that would like to use them. All in all, I welcome the advice and criticism. |
|
|
|
|
I know I am relatively new here and even with philipma1957 taking a hiatus from escrow services, we still have quite a few reputable and trustworthy members that also serve as escrow services.
That being said, I would like to offer to my services as an escrow provider as well. I see this an both an opportunity and as a privilege to serve this community. I see this as only being beneficial to the community to have multiple available escrow providers.
- Once contacted by either seller or buyer - I will draft a contract involving seller, buyer and myself with terms/conditions. This should cover all the possible "if this, then this" scenarios
- Once both parties agree, I will provide a "escrow" address to buyer and request a "refund address" from buyer and a "pay to" address from seller
- The "escrow" address I provide will be an address specific to this contract only - I will provide a new address for each contract
- I will be willing to escrow using the following crypto currencies: BTC, BCH, ETH, LTC
- Once funds are received into the "escrow" address, I will notify both parties and seller will need to ship item and provide tracking
- Once package is received by buyer, they will have a mutually agreed amount of time to review product once it arrives (1 to 2 days typically)
- If there are issues - they will need to be communicated and I will work with both buyer & seller to come to a fair resolution
- Once buyer and seller are satisfied, I will release funds to the seller
- I will charge 1% fee
there are also some things I will not perform escrow services for:
No digitial goods
No gift cards
If anyone has any questions about or issues with what I am offering above, please let me know.
|
|
|
|
Is there a way to apply the GPU overclocking settings by algo and by card ? It sucks to have to change the settings for each card when i switch algos
buying the license for 20 machines you have OC that you can define for each al-go. Smaller licenses do not benefit from AL-GO with OC 20 machine licence does not allow overclocking if I recall. Ok now I’m confused lol Premium Edition (20 miners) includes all overclocking features. Both Native Overclocking and the MSI Afterburner integration. Lower editions doesn't include any overclocking features. ahh my confusion then - thought 20 machines was still below the overclocking feature. |
|
|
|
Hello i have 3 S17 miners for sale and shipping from Romania.
Price - 3190€
Can use a trusted escrow
is that the price for all three or each one separately? |
|
|
|
Is there a way to apply the GPU overclocking settings by algo and by card ? It sucks to have to change the settings for each card when i switch algos
buying the license for 20 machines you have OC that you can define for each al-go. Smaller licenses do not benefit from AL-GO with OC 20 machine licence does not allow overclocking if I recall. |
|
|
|
Yeah I agree honestly as i am the same way as you I think. Hands in 18 cookie jars type dude. It will be cheaper to buy elsewhere but I get why you want to do it yourself. Hell I am married with 3 kids and my place is a 2 hour plane ride from the family. Good and bad i guess hehe.
yeah lol the advantage to mine is that the property is actually adjacent to the acreage I live on. The property is zoned so as to allow me to do residential or commercial. I have a few children as well ( 8 ), though our youngest is 21 but we also have 10 grandchildren. I just wish I had never stopped mining back in 2011 or so... I cannot imagine what I would have had in BTC by now lol |
|
|
|
|
Show Posts
