|
VRobb
|
 |
June 13, 2019, 02:16:05 AM |
|
Yay! I love big block weekends. One more for good measure, please!  MINE ON WITH KANO-SAN AND FRODO! Who is Frodo? 16v got very lucky this time... Frodo is the best moderator around that's who!    One kano-pool to rule them all...! Sorry, that's what I think of when I see the name 'Frodo'  Mine on!  |
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc
These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70
Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
Artemis3
Legendary
 Offline
Activity: 2030
Merit: 1563
CLEAN non GPL infringing code made in Rust lang
|
|
June 13, 2019, 03:36:26 PM |
|
We have a few large miners that failover here. They used to mine here consistently but moved on to other pools that let's say don't treat each TH the same. The nice thing is when they failover they are still ramping up and us consistent Kano miners reap the benefits of 5nd. I wonder what pool is that, Viabtc? seems to be the fashionable pps pool nowdays... |
█████████████████████████
██████████████████████████
██████████████████████████
███████████████████████████ | BRAIINS OS+| | AUTOTUNING
MINING FIRMWARE| | Increase hashrate on your Bitcoin ASICs,
improve efficiency as much as 25%, and
get 0% pool fees on Braiins Pool | |
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
 Online
Activity: 2128
Merit: 2275
EIN: 82-3893490
|
|
June 13, 2019, 04:22:45 PM |
|
We have a few large miners that failover here. They used to mine here consistently but moved on to other pools that let's say don't treat each TH the same. The nice thing is when they failover they are still ramping up and us consistent Kano miners reap the benefits of 5nd. I wonder what pool is that, Viabtc? seems to be the fashionable pps pool nowdays... I have 5 s9's on viabtc - also my BW L21's are also on viabtc |
|
|
|
Steamtyme
Legendary
Offline
Activity: 1554
Merit: 2036
|
|
June 13, 2019, 04:31:27 PM |
|
I think that's where most of our former hashrate whales are. There are some "bonus's" for those large guys, a decent payout structure; still a higher fee but less variance.
I believe the bonus aspect is why they would be there opposed to slush or other options.
|
░░░░░▄▄██████▄▄
░░▄████▀▀▀▀▀▀████▄
░███▀░░░░░░░░░░▀█▀█
███░░░▄██████▄▄░░░██
░░░░░█████████░░░░██▌
░░░░█████████████████
░░░░█████████████████
░░░░░████████████████
███▄░░▀██████▀░░░███
█▀█▄▄░░░░░░░░░░▄███
░░▀████▄▄▄▄▄▄████▀
░░░░░▀▀██████▀▀
| Ripmixer
░░░░░▄▄██████▄▄
░░▄████▀▀▀▀▀▀████▄
░███▀░░░░░░░░░░▀█▀█
███░░░▄██████▄▄░░░██
░░░░░█████████░░░░██▌
░░░░█████████████████
░░░░█████████████████
░░░░░████████████████
███▄░░▀██████▀░░░███
█▀█▄▄░░░░░░░░░░▄███
░░▀████▄▄▄▄▄▄████▀
░░░░░▀▀██████▀▀
|
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2128
Merit: 2275
EIN: 82-3893490
|
|
June 13, 2019, 04:43:30 PM |
|
I think that's where most of our former hashrate whales are. There are some "bonus's" for those large guys, a decent payout structure; still a higher fee but less variance.
I believe the bonus aspect is why they would be there opposed to slush or other options.
currently viabtc has also discounted their fees up to 70% - depending on hash rate - then the merged mining, even though they are shit coins mostly with enough volume, I am sure it would add up. I think my LTC miners are getting about $1.50 per week in doge lol |
|
|
|
Raymond_B
Member
Offline
Activity: 504
Merit: 71
Just Getting Started...
|
|
June 15, 2019, 12:15:02 AM |
|
Our weekly whale is back! Come ramp up fast and get blocks!
|
|
|
|
BSGMiner
Member
Offline
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
|
|
June 15, 2019, 02:58:28 AM |
|
Our weekly whale is back! Come ramp up fast and get blocks!
This really makes me look forward to WHALE WEEKENDS!!!*** The reason it's so profitable for the hundreds of us that mine here 24/7 is exactly because of the PPLNS (5Nd)--which we're all fully ramped up on--and when a whale joins for just long enough to get a block or two over the weekend, they've only ramped up 1/5th of the way, for example, so we still get decent percentages of the rewards, but in real-time we get a few more rewards faster than usual. A real-world example from our last Whale Weekend was the equivalent of me running ~90TH/s instead of ~30TH/s! MINE ON WITH KANO-SAN!!! |
The BTCest mining pool (<1% fee): KanoPool***PPLNS rewards averaged over the 5Nd to reduce variance*** |
|
|
ZimbaCardi
Member
Offline
Activity: 128
Merit: 36
|
|
June 16, 2019, 12:54:07 PM |
|
16vV does it again! Thank you.
|
|
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
June 16, 2019, 04:05:06 PM |
|
16vV does it again! Thank you.
Thanks 16vV8! Another welcomed BLOCK PARTY |
|
|
|
|
Raymond_B
Member
Offline
Activity: 504
Merit: 71
Just Getting Started...
|
|
June 16, 2019, 05:18:49 PM |
|
Like I said in Discord, if we get 3 blocks this weekend I'll go vegan for the rest of the month 1 down 2 to go... |
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2128
Merit: 2275
EIN: 82-3893490
|
|
June 17, 2019, 02:53:30 PM |
|
is kano.is down? I cannot get the page to load.
**EDIT**
nvm - figures as soon as I post that it comes back up lol
|
|
|
|
ZimbaCardi
Member
Offline
Activity: 128
Merit: 36
|
|
June 17, 2019, 02:54:48 PM |
|
All well for me
|
|
|
|
|
kano (OP)
Legendary
Offline
Activity: 4536
Merit: 1847
Linux since 1997 RedHat 4
|
|
June 17, 2019, 03:08:56 PM |
|
is kano.is down? I cannot get the page to load.
**EDIT**
nvm - figures as soon as I post that it comes back up lol
There were network delays at the web server for a couple of minutes just after 14:00 UTC But they resolved themselves pretty quickly so I didn't have to find out what was going wrong. Seemed to be all OK after that, but I guess you might have seen a hiccough after that caused by whatever caused it in the first place. |
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2128
Merit: 2275
EIN: 82-3893490
|
|
June 17, 2019, 03:16:49 PM |
|
is kano.is down? I cannot get the page to load.
**EDIT**
nvm - figures as soon as I post that it comes back up lol
There were network delays at the web server for a couple of minutes just after 14:00 UTC But they resolved themselves pretty quickly so I didn't have to find out what was going wrong. Seemed to be all OK after that, but I guess you might have seen a hiccough after that caused by whatever caused it in the first place. yea it was only a brief few minutes - just happened to be when I was trying to look at it |
|
|
|
Make-A-Buck
Newbie
Offline
Activity: 65
Merit: 0
|
|
June 18, 2019, 03:42:20 AM |
|
Just wanted to share a bit of good news that happened to me today (and for anyone that has an old Antminer R4) this info could potentially help.
I had an unexpected good event happen on one of my miners today - my old Antminer R4 - you see a lot of them processing at half rate (4THs instead of 8THs) because one of the two hash boards 'goes bad'. Well that happened to me over 8 moths ago on my R4 and today after a power brown-out my other miners never missed a beat and stayed online working away while the R4 appeared to be working (with one board @ 4THs which it has been for the last 8 months and many hardware reboots) but on Kano.is was showing it wasn't processing any shares and hadn't been for over 19 hours. Usually I do a HARDWARE reset by shutting off the main power supply and turning it back on & that resolves the issue. However this time I instead forced a soft reboot in the Miner Configuration Web GUI, and to my surprise - WOW - the 2nd hashing board CAME BACK TO LIFE! Now the old R4 is back to processing at over 8THs! Just thought I'd share some good mining news. Have a good one & mine on with KANO!
|
|
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2128
Merit: 2275
EIN: 82-3893490
|
|
June 18, 2019, 03:53:47 AM |
|
Just wanted to share a bit of good news that happened to me today (and for anyone that has an old Antminer R4) this info could potentially help.
I had an unexpected good event happen on one of my miners today - my old Antminer R4 - you see a lot of them processing at half rate (4THs instead of 8THs) because one of the two hash boards 'goes bad'. Well that happened to me over 8 moths ago on my R4 and today after a power brown-out my other miners never missed a beat and stayed online working away while the R4 appeared to be working (with one board @ 4THs which it has been for the last 8 months and many hardware reboots) but on Kano.is was showing it wasn't processing any shares and hadn't been for over 19 hours. Usually I do a HARDWARE reset by shutting off the main power supply and turning it back on & that resolves the issue. However this time I instead forced a soft reboot in the Miner Configuration Web GUI, and to my surprise - WOW - the 2nd hashing board CAME BACK TO LIFE! Now the old R4 is back to processing at over 8THs! Just thought I'd share some good mining news. Have a good one & mine on with KANO!
nice and congrats! hope it stays running for you! |
|
|
|
ZimbaCardi
Member
Offline
Activity: 128
Merit: 36
|
|
June 19, 2019, 01:30:26 PM |
|
So, I have been mining on Kano with a T9+ and learning this 5Nd thing for a month now and was not even close to getting to the 10.5TH ramp up; I went ahead and "helped it" with a 2nd T9+ and a Bitfily B1+ (Total of 34TH), now my Shift Graph shows roughly the same as the single miner.
Does this mean at next payout I can expect the "full" share of the single 10.5TH miner?
Is this way of ramping up quickly ok?
|
|
|
|
|
Artemis3
Legendary
Offline
Activity: 2030
Merit: 1563
CLEAN non GPL infringing code made in Rust lang
|
|
June 19, 2019, 01:49:30 PM |
|
Just wanted to share a bit of good news that happened to me today (and for anyone that has an old Antminer R4) this info could potentially help.
I had an unexpected good event happen on one of my miners today - my old Antminer R4 - you see a lot of them processing at half rate (4THs instead of 8THs) because one of the two hash boards 'goes bad'. Well that happened to me over 8 moths ago on my R4 and today after a power brown-out my other miners never missed a beat and stayed online working away while the R4 appeared to be working (with one board @ 4THs which it has been for the last 8 months and many hardware reboots) but on Kano.is was showing it wasn't processing any shares and hadn't been for over 19 hours. Usually I do a HARDWARE reset by shutting off the main power supply and turning it back on & that resolves the issue. However this time I instead forced a soft reboot in the Miner Configuration Web GUI, and to my surprise - WOW - the 2nd hashing board CAME BACK TO LIFE! Now the old R4 is back to processing at over 8THs! Just thought I'd share some good mining news. Have a good one & mine on with KANO!
I think i saw that happening to me as well once last year, and i think i did in fact just reboot the controller from console. If you use the firmware from Dec 2018, it should do 8.5THs, or at least it did with my 8T model (600ish mhz boards). |
█████████████████████████
██████████████████████████
██████████████████████████
███████████████████████████ | BRAIINS OS+| | AUTOTUNING
MINING FIRMWARE| | Increase hashrate on your Bitcoin ASICs,
improve efficiency as much as 25%, and
get 0% pool fees on Braiins Pool | |
|
|
|
Biodom
Legendary
Offline
Activity: 3794
Merit: 4005
|
|
June 19, 2019, 07:23:44 PM |
|
Any relation to this business? Most likely not, i would guess. https://www.engadget.com/2019/06/19/kano-pc-windows-10-coding-computer/Kano is graduating from Raspberry Pi boards. Today, the company is announcing a partnership with Microsoft and unveiling its first build-it-yourself computer that officially runs Windows 10. |
|
|
|
|
rifleman74
Member
Offline
Activity: 658
Merit: 21
4 s9's 2 821's
|
|
June 19, 2019, 09:47:01 PM |
|
So, I have been mining on Kano with a T9+ and learning this 5Nd thing for a month now and was not even close to getting to the 10.5TH ramp up; I went ahead and "helped it" with a 2nd T9+ and a Bitfily B1+ (Total of 34TH), now my Shift Graph shows roughly the same as the single miner.
Does this mean at next payout I can expect the "full" share of the single 10.5TH miner?
Is this way of ramping up quickly ok?
This way of ramping up quickly is ok, but it's still going to take you awhile to get up to that 10.5TH average. But, like you said, you'll be getting there quicker than by just mining with the original 10.5TH machine. |
|
|
|
|
|
