European customers will have their miners sent from within the Eurozone yes, we inform them of that before they pay to the euro accounts for their purchases. Seeing as how we are formal distributors of a chip made in Switzerland, and work with other designers in Eastern Europe, wouldn't it be more practical to have a small assembly shop in Europe as well, for the few euro clients we have? Or should we ship everything to the us and then ship back to the EU when we have a registered European Union based company and soon a small office over there which will act as a small assembly slash euro zone shipping hub. From a tax and logistic cost standpoint it makes more sense doesn't it? Especially when shipping a 22lb machine.  

NEW THREAD POLICY.  

ANY FORUM/THREAD MEMBERS THAT HELP AMT  FIGHT AGAINST TROLLS AND NEGATIVE THREAD MEMBERS WILL GET 5% OFF ANY MINER WE SELL + 1 TO 2 WEEKS OFF THE EXPECTED SHIPPING TIME FRAME. STARTING NOW 12/09/2013.  THAT DISCOUNT IS ON TOP OF ANY DISCOUNTS OR OTHER PROMO'S WE'RE RUNNING NOW OR IN THE FUTURE AND CAN BE USED AT ANY POINT THE TROLL FIGHTER WOULD LIKE TO USE IT.  

How do you help AMT fight trolls? When other members make negative remarks or post something that can be construed as something provocative or something generally undermining towards our credibility you should follow that post with a positive response and if the situation calls for it, an intelligent remark against the troll or negative individual Including reasons why they are possibly being negative, or provocative.

Also, random comments here that are supportive and generally nice for AMT to have on it's thread is also considered helping AMT fight trolls. A combo of the two is preferred. Don't fake it, but just support an up an coming mining manufacturer through positive remarks.  

When claiming your discount please simply provide proof of your posts via a message to us directly here on this forum from the username that you used to post with. One post wont cut, we're looking for real supporters here and we'll reward those that are positive and cheerful individuals on this thread from this point forward.

There are a few members which already earned this Troll fighting discount and I'll make a list of them shortly.

An over simplified backup cooling solution to shorter heat sinks on boards which need to fit into tight HDD racks. A 10mm fan similar to the original design.

Racks for modular board designs - a rack with a fan that is stock from lian li which work really well.

Cooling options and Mini fans we're experimenting with while mounting them to heat sinks to try control heat.

A few Miners in the hall ready to be packaged, labeled and picked up by UPS at 2pm.

Integrated TPLink with direct UI Via IP Model

Integrated Raspberry PI Model

Fine.  But i'm shooting this with the phone and upload it in a few hours. We're working on a 192 right now anyway.

You realize your like a 15 year old boy stalking a girl he's crushing on right.  Creeping around outside the office, talking pictures.

Why dont you focus on your own company which claims to sell bitcoins via credit but actually doesn't.

Don't worry guys we're hard at work. Thanks for all the support and we appreciate it.

Pick up is still an option, when a clients miner is ready we send them an email like
"Hi, your miner is ready - please come pick it up - please bring proof of purchase/transfer, ID -etc" So during this transition over the next few weeks we will inform them to pickup at the havertown location or the new office off lancaster ave.

Lian li is very expensive, but they are also one of the best in the industry regarding casing for computers and case design for custom computers and machines. So yea we're going to pay double or maybe triple what our competitors pay for a great case.

Buy why?

1. we can rely on lian li to have surplus  of stock cases (encase our cases aren't ready yet)  and no delays.
2. they offer a really nice quality product and a high quality casing and in a market who's consumer basis is growing, the non-tech guys might just choose the prettiest most familiar looking device.
3. There is no reason why we can't make a pretty miner, if our pricing is reasonable and if we choose to take a loss on profit by making a pretty miner, its our loss. Also we feel it will expand our consumer basis because regular people are generally intimidated of computer components will choose to buy our miner because it looks simple and more like something they are familiar with. - and again it will be pretty.
4. Expansion sections for mounting new drives/boards. The bottom of the smaller cases comes with an expansion rack, this will be standard in each of our machines, this way the customer can order a coincraft board + heatsink and micro fans (fans similar to the ones that go under a 3.5 drive) from us, and mount it on the bottom, turning the bottom of that case into an extra 220 ghs.


I'm going to break this down by number if that's alright.

1. The air pressure coming from the front side fan pushes the negative heat over and under the boards and out the top ventilation fan. It really does not matter if the boards are up or down because of that airflow design. That design is not the most practical but because bitfury chips dont get too hot, we can get away with it and ship in a case which is available at the moment. This is the same case that is being modified for our miners from lian li and we are going to be a distributor of their casing and casing components as well.
2. That flaky shiny thing you see this is a locking mechanism on the front of the cage, this allows for a strong hold of the boards.
3. This is just a case with boards - no cables actually. the boards connect via usb and 4 pin molex which are placed in the back of the board but connected with shorter cables. On the 1.2 we'll have a nice backboard like the snappy setup you're referring to.
4. TPlink and or USB cables. You can connect the tplink directly to your router at home and leave it to mine. The nulled TPlink firmware image comes with CGMiner along with a API code if you'd like to use a more user friendly software that integrates with a cgiminer api. Or connect the inbound usb cable connected to the tplink directly to your computer and mine with Hexminer.
5. I dont have a good answer for that one.. period.
6. Yes that is the price of the 1.2th - correct.
7. For the 80,128,192, and 220, Each board needs about 80W Each board gets up to 51ghs but call it 45 just to be safe. - you do the math on what supply we'll put in the case depending on which model is ordered.
8. -?
9. -?
Regarding clients that have received our miners, we think because we never really sold to forum guys thats why no one is posting on the forum. We want to be 100% sure we can continue to make bitfury based miner before we publish a video on it.

We feel our pricing is ok, we have some discounts in the future but we want to be absolutely sure we can cover all costs expected and unexpected.

A good thing my grandfather once told me (He owned one of the most known Deli's on the main line to do this day, and still the best place in town to get a corned beef sandwhich on a rye) he said, "What ever you think you'll need for your business, think again, and then double or triple it. You may have less customers but you'll have a more happy customer because you'll do your job right and better than anyone else".

Bsnmine - we apologize for not answering them but it was because we didnt have a full place of our own yet but now we're getting on have provided instructions on how to schedule a visit in this thread.

Read on further in the thread we've provided instructions for the visitations.

No Bif.. death of salesman reference?

We have been shipping but did anyone ever think that maybe we havn't sold as much as KNC or the other guys? And the batches we ship are smaller!?  

ALSO February is for the 1.2th! becuase we're backed up with pre-orders.

But if they want an 80ghs or a 128ghs those ship in 3 to 4 weeks from the date of payment.

GUYS!  Hi!

The place will be up and ready the  next week and we will accept visitors. Please understand the following:

1. This will not be where we build the actual miners. This will not be where we house or store the actual miners.
2. This is a sales and accounting shop for visitors to see we're legit, speak with someone from the company owners, drop off checks and pick up miners up that are ready.
3. We may at times have miners ready or available for demoing but nothing will be available for purchase in the moment.   Do not bring cash with you and offer to pay more for a miner on the spot. It is not an option, we are not BFL, and we want to treat our customers equally and fairly so they continue to order and buy from us.
4. Please schedule a meeting in advance and don't just drop by. If you drop by we're going to be like wtf why didn't you schedule something in advance. We understand some people have been trying to schedule something up already so therefore we have set up a specific email for visitors so that these requests get directly to right individual in the company that will be in charge of scheduling these appoints.

We apologize for the disorganization in this matter until now, but please just understand we are a start-up in a crazy industry and we are hard at work.

Visits can start from the 16th. We're actually moving into this location on the 12th thats why. All visitors that would like to come can email and schedule their appointment via email on

iwantproof@advancedminers.com

give me like an hour or so to set up the email.

If your house, apartment, office, dorm room.. doesn't have the AMP capacity to run this thing than you'll appreciate a switch. Some people don't take power consumption into consideration before buying miners, it was made as a courtesy towoards ignorance.