|
I have not sent any transaction yet but now I tried and any small transaction will move a big portion of the balance to a new wallet, can we link multiple BB wallets (like for BTC signing) for the distribution phase (10% for each BB held) or we do need to send all the BB in one transaction to our original first BB address ?
|
|
|
|
So best thing is that everyone buys in the ICO at last day, last hour ?
That's what I understand from the excel spreadsheet as well but I don't get why is this good. Instead of having a big rush in the beginning, this creates sudden funding just before deadline. |
|
|
|
|
really? typo in the first page of the whitepaper... "writter and prepared by"
|
|
|
|
|
when trying to make a full back with password, twice failed, then closed chrome (was using about 80% of my ram), then it succeeded, is there a connection or why does the backup fail sometimes?
|
|
|
|
Hello, one question will sound like stupid...  How can I link account signing a message. The bot said before singning, you must "let me know your bitcoin adress first". How can I show my bitcoin adress to the bot? Writing it in the chatbot doesn't work... (using android wallet for byteball) Please, how can I tell the bot my BTC adress before pasting message signed?? I dont want to miss this round! paste address fist and click send icon, then when prompted paste the signed message and click The problem is: Paste BTC adress, click send icon. And nothing happens. Maybe because I'm working with Android Byteball-wallet? It works exactly that way, I've just done it myself a few hours ago. Is there something special about that address? E.g. you can't sign with a multi-sig address starting with the letter '3'! (I pasted the BTC adress and no answer from the bot). you enter one BTC address then sign or send small amount, then enter next BTC address and so on |
|
|
|
|
guys how many incorrect shares you have? I got about 1 / 150-200shares
|
|
|
|
Is there any reason to upgrade to 9.0 if you've got old GPUs? (280/290 etc)
Huge DCR performance boost on 290 when dual mining, you might be power limited though. I have R9 390 and I'm using 8.1 but there's no rela difference from 7.4. When I try v9 it only works with same or less eth speed and same dcr speed, it can double the dcr speed but no matter what I do, it crashes the whole rig in about 10-20minutes, tried lower ethi, lower dcri, more vdcc, if it has more hash than 8.4, it crashes. Something is limiting it, you need to find it yourself. No crashes here, it just starts throttling when it hits power limit. +50% to numbers below and still power limited.  How much more power does V9 draw compared to the previous one? right now I'm testing with -3.3% eth speed, +33% dcr speed, removed undervolting completely and gave +20% powerlimit, haven't checked the wallmeter but if this needs 40mv more, that's gotta be at least 10% more power. |
|
|
|
Is there any reason to upgrade to 9.0 if you've got old GPUs? (280/290 etc)
Huge DCR performance boost on 290 when dual mining, you might be power limited though. I have R9 390 and I'm using 8.1 but there's no rela difference from 7.4. When I try v9 it only works with same or less eth speed and same dcr speed, it can double the dcr speed but no matter what I do, it crashes the whole rig in about 10-20minutes, tried lower ethi, lower dcri, more vdcc, if it has more hash than 8.4, it crashes. |
|
|
|
|
If tony continues to develop at this rate by the time distribution will be over, this coin will be famous, I mean top10 crypto easily. I just wonder how he does it alone!
|
|
|
|
Why do we need to keep our linked bitcoins in our wallets and not being able to spending them?
You only need to link your bitcoin exactly at the time of the snapshot, not before or after, but if you miss that exact time, well then you don't get your bytes. It's up to you when you link your address. |
|
|
|
4x 280x, 1 of my cards restarts the rig even without asm and with i 0, I can't reduce it any lower, had to revert to 11.1, no OC at all.
The same problem here. One of my 280x hangs causing multiple restarts of the watchdog! Never happened before! I've been having same problem , at this point a clean reinstall of 15.12 seems to have my 9xR9 280x in 2 rigs at i 5 and i 4,4,6,7 getting avg 300 h/s for 2+ hrs I could do 6/6/1/5 for a few hours, then I kept going lower to have no restarts every 2-3-4hours and in the end everything crashes, even with i 0. I know one of my cards is a bit trashed, can only go at low clock mem but it does go for years like that with an other algo or miner, so it's not like the card shat itself completely, it had a 400hour uptime with 11.1 before I switched. |
|
|
|
|
4x 280x, 1 of my cards restarts the rig even without asm and with i 0, I can't reduce it any lower, had to revert to 11.1, no OC at all.
|
|
|
|
under what name ? I can't find it. |
|
|
|
Hi ALL! So, having 4*R9 280X with 8 Gb RAM and 32 Gb Virtual mem. CM 12.0 runs only with -i 2 stable. With -i 3 or -i 4 after ~1 hr. one card hows 0 hash and miner restarts . With default -i ( -i 6) miner writes low virtual mem. and lower intensity to 5 and i get same situation as with -i 3 , -i 4. Only way to run it stable is -i 2 option  ? My hash rate lower by ~10-15 hashes per card with this intensity. Anyone in this situation ? pwpwpw,thesaltonsea and me ownmind. We all in one boat. Claymore or someone, can you explain this situation? Please, take a look at problem. https://bitcointalk.org/index.php?topic=1670733.msg17878165#msg178781654x 280x, tried to run -i 0 all cards still fail, looked at v11.1 had settings at i 6,6,4,5, now I'm trying 5,5,0,1 with asm 1,1,0,1 so the 3rd card is completely turned down, doing 210H/s (way worse than V11), the rest do, 290 290 270, this is barely faster but somehow one card simply dies with this new miner and another can only go with low setting, using 40GB virtual memory, 4GB system ram, tried the cpu with and without OC, no difference, wiped and reinstalled drivers no difference, meanwhile v11.1 flawless so it's not a physical loose plug or something. |
|
|
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers My 280x rig works only with -i 2 on all cards. Anything more and it crash. Me too. Have 1 rig with 3x280x, for it works only -i 2. But my mixxed farm with 3x7970,280x,290x are rock stable with different -i. I'm confused. I uninstalled and reinstalled 15.12, no change, now I'm trying -i 0, the rig keeps restarting. It's only 260-265H / 280x now, that's almost the same as V11. |
|
|
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers This is what was happening to me as well. Something about the Atikmdag crashing, which i believe is the driver. So what i did is reinstall fresh driver after wiping old ones. Then run my cards without any kind of OC software running. Since then i am stable. you used the same driver 15.12? what is your -i setting? gonna try -i 2 now and when i come back home, will reinstall drivers, i'm using DDU to remove previous ones. |
|
|
|
Hey guys, I don't know how to make this V12 work, had no problem with any version before, my rig is 4x 280x with 2x 750W PSU so I got power, win7 x64, 4g ram, 40g swap file. I tried running from -i 6 to all the way to i 1 on 2 cards, (-i 4,4,1,1 now) and still the rig simply crashes, the gpu driver fails and restart. I'm trying for 3days but every day I wake up I see that it restarted, here's the bluescreen log. http://imgur.com/a/mJFsGThere's nothing in the claymore log this time, previously the 3rd and 4th card failed, now I don't know which one, log doesn't say, simply stops. edit: 15.12 drivers |
|
|
|
|
On r9 390 8gb win7 x64 15.12, v12 produces about 5% gpu errors, even if I lower i to 4, (on that setting it's slower than v11.1). any idea why ? (swap file size 18gb)
|
|
|
|
Big dump after the distribution?
probably, like with the first one, and then price doubled a few times. |
|
|
|
|
if you make it pow, don't add an asic-friendly algo.
|
|
|
|
|
Show Posts
