Bitcoin Forum
May 08, 2024, 10:06:34 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [19] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 »
361  Bitcoin / Mining support / Strange Error In Miner on: May 12, 2020, 06:58:20 PM
I have some V9's I had some issues with the miner rejecting a lot of shares so I decided instead of letting the GUI start CGMiner I would manually run it from the command line.

I'm now seeing some strange lines in the kernel log that I have never seen before and wanted to know if anyone know's the reason for them and if there is anything I can do to try make these miners stop rejecting 48% of the shares.

I have some others that do not do this and I think this is down to buggy firmware on the V9's.

Bitmain say there is no issue but I don't agree.

The new line that is showing is

Code:
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!

What is nonce fifo full? It's not something I have ever seen before.

There is also this error showing in the log about the nand and ECC used?

Code:
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01

I have included the Kernel log,  CGminer log.

I am starting cgminer manually with

Code:
./cgminer -c /config/cgminer.conf -l 5 -P --verbose --sharelog --D --logwork-diff

Thanks in advance!

CGminer Running Window

Code:
cgminer version 4.9.0 - Started: [2020-05-12 13:26:03]
--------------------------------------------------------------------------------
 (5s):3.363T (1m):3.495T (5m):3.183T (15m):2.013T (avg):3.452Th/s
 ST: 1  SS: 0  NB: 27  LW: 14928274  GF: 0  RF: 0
 Connected to de.ckpool.org diff 1.98K with stratum as user ***************************
 Block: 1112e178...  Diff:16.1T  Started: [18:47:57]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 0: V9 0       :                         | A:10354039 R:9354733 HW:11
--------------------------------------------------------------------------------
 [2020-05-12 18:57:42] ChainID[2] Wirte Work. workid=98
 [2020-05-12 18:57:42] Popping work from get queue to get work
 [2020-05-12 18:57:42] Selecting pool 0 for work
 [2020-05-12 18:57:42] Generated stratum merkle 6822d5fb700a7d8e0d690541fb42859e89da38dcd72323b36a83da0cc6ae2e1d
 [2020-05-12 18:57:42] Generated stratum header 200000007c647f95f8b160f3c4579b1248ebcff878b365f4001112e100000000000000006822d5fb700a7d8e0d690541fb42859e89da38dcd72323b36a83da0cc6ae2e1d5ebaf19317117a390000000000000080000000000000
00000000000000000000000000000000000000000000
 [2020-05-12 18:57:42] Work job_id 5eb8bdaf00000a73 nonce2 433969 ntime 5ebaf193
 [2020-05-12 18:57:42] Generated target 000000000000000000000000000000000000000044b60d627e1d210000000000
 [2020-05-12 18:57:42] Generated stratum work
 [2020-05-12 18:57:42] Pushing work from pool 0 to hash queue
 [2020-05-12 18:57:42] Got work from get queue to get work for thread 0
 [2020-05-12 18:57:42] ChainID[0] Wirte Work. workid=99
 [2020-05-12 18:57:42] Popping work from get queue to get work
 [2020-05-12 18:57:42] bitmain_scanhash: chain 0 which_asic_nonce 11
 [2020-05-12 18:57:42] Selecting pool 0 for work
 [2020-05-12 18:57:42] Generated stratum merkle 00d87c10c0b2466644dd5e3a9498b540e0bcd2530857cd8a64a5f7358b737339
 [2020-05-12 18:57:42] Generated stratum header 200000007c647f95f8b160f3c4579b1248ebcff878b365f4001112e1000000000000000000d87c10c0b2466644dd5e3a9498b540e0bcd2530857cd8a64a5f7358b7373395ebaf19317117a390000000000000080000000000000
00000000000000000000000000000000000000000000
 [2020-05-12 18:57:42] Work job_id 5eb8bdaf00000a73 nonce2 433970 ntime 5ebaf193
 [2020-05-12 18:57:42] Generated target 000000000000000000000000000000000000000044b60d627e1d210000000000
 [2020-05-12 18:57:42] Generated stratum work
 [2020-05-12 18:57:42] Pushing work from pool 0 to hash queue
 [2020-05-12 18:57:42] Got work from get queue to get work for thread 0
 [2020-05-12 18:57:42] ChainID[2] Wirte Work. workid=102
 [2020-05-12 18:57:42] Popping work from get queue to get work
 [2020-05-12 18:57:42] Selecting pool 0 for work
 [2020-05-12 18:57:42] Generated stratum merkle 109612f1408ab53a98343fc1e1c47bacabbbf86fbb13e2095583a128c1d5193a
 [2020-05-12 18:57:42] Generated stratum header 200000007c647f95f8b160f3c4579b1248ebcff878b365f4001112e10000000000000000109612f1408ab53a98343fc1e1c47bacabbbf86fbb13e2095583a128c1d5193a5ebaf19317117a390000000000000080000000000000
00000000000000000000000000000000000000000000
 [2020-05-12 18:57:42] Work job_id 5eb8bdaf00000a73 nonce2 433971 ntime 5ebaf193
 [2020-05-12 18:57:42] Generated target 000000000000000000000000000000000000000044b60d627e1d210000000000
 [2020-05-12 18:57:42] Generated stratum work
 [2020-05-12 18:57:42] Pushing work from pool 0 to hash queue
 [2020-05-12 18:57:42] Got work from get queue to get work for thread 0
 [2020-05-12 18:57:42] ChainID[0] Wirte Work. workid=105
 [2020-05-12 18:57:42] bitmain_scanhash: chain 0 which_asic_nonce 11
 [2020-05-12 18:57:42] ChainID[1] Wirte Work. workid=93
 [2020-05-12 18:57:42] Popping work from get queue to get work
 [2020-05-12 18:57:42] Selecting pool 0 for work
 [2020-05-12 18:57:42] Generated stratum merkle 3eed54491f6b9a5b49f6e008494762dee2f1bfd956f19faae308acaf6681707f
 [2020-05-12 18:57:42] Generated stratum header 200000007c647f95f8b160f3c4579b1248ebcff878b365f4001112e100000000000000003eed54491f6b9a5b49f6e008494762dee2f1bfd956f19faae308acaf6681707f5ebaf19317117a390000000000000080000000000000
00000000000000000000000000000000000000000000
 [2020-05-12 18:57:42] Work job_id 5eb8bdaf00000a73 nonce2 433972 ntime 5ebaf193
 [2020-05-12 18:57:42] Generated target 000000000000000000000000000000000000000044b60d627e1d210000000000
 [2020-05-12 18:57:42] Generated stratum work
 [2020-05-12 18:57:42] Pushing work from pool 0 to hash queue
 [2020-05-12 18:57:42] Got work from get queue to get work for thread 0
 [2020-05-12 18:57:42] ChainID[2] Wirte Work. workid=107
 [2020-05-12 18:57:42] Popping work from get queue to get work
 [2020-05-12 18:57:42] Selecting pool 0 for work
 [2020-05-12 18:57:42] Generated stratum merkle 8cecafc1f3d58fe47b9da7b59a004f047ce984cbc5509d4ce9fcbb29b61c6411
 [2020-05-12 18:57:42] Generated stratum header 200000007c647f95f8b160f3c4579b1248ebcff878b365f4001112e100000000000000008cecafc1f3d58fe47b9da7b59a004f047ce984cbc5509d4ce9fcbb29b61c64115ebaf19317117a390000000000000080000000000000
00000000000000000000000000000000000000000000

Full Kernel Log

Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #22 SMP PREEMPT Fri Dec 22 12:25:44 CST 2017
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0938d00, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 205940K/245760K available (5317K kernel code, 230K rwdata, 1844K rodata, 1024K init, 222K bss, 23436K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc07fe410   (8154 kB)
      .init : 0xc0800000 - 0xc0900000   (1024 kB)
      .data : 0xc0900000 - 0xc0939a60   ( 231 kB)
       .bss : 0xc0939a60 - 0xc09713e8   ( 223 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12444K (cceda000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Broadcom BCM5241 e000b000.etherne:00: attached PHY driver [Broadcom BCM5241] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
5 ofpart partitions found on MTD device pl35x-nand
Creating 5 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0800000 - c0900000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcf99c000
*base_vir_addr = 0x200ac513
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
May 10 16:12:34 (none) local0.err cgminer: Miner compile time: Mon Mar 12 18:34:47 CST 2018 type: Antminer V9
May 10 16:12:34 (none) local0.warn cgminer: Started cgminer 4.9.0
May 10 16:12:34 (none) local0.warn cgminer[963]: bitmain_V9_init
May 10 16:12:35 (none) local0.notice cgminer[963]: check_chain
May 10 16:12:35 (none) local0.notice cgminer[963]: Chain 0 existed!
May 10 16:12:35 (none) local0.notice cgminer[963]: Chain 1 existed!
May 10 16:12:35 (none) local0.notice cgminer[963]: Chain 2 existed!
May 10 16:12:35 (none) local0.notice cgminer[963]: every_chain_reset_PIC16F1704_pic_new
May 10 16:12:36 (none) local0.notice cgminer[963]: reset_PIC16F1704_pic_new ok
May 10 16:12:37 (none) local0.notice cgminer[963]: reset_PIC16F1704_pic_new ok
May 10 16:12:38 (none) local0.notice cgminer[963]: reset_PIC16F1704_pic_new ok
May 10 16:12:39 (none) local0.notice cgminer[963]: every_chain_jump_from_loader_to_app_PIC16F1704_new
May 10 16:12:39 (none) local0.notice cgminer[963]: jump_from_loader_to_app_PIC16F1704_new ok
May 10 16:12:40 (none) local0.notice cgminer[963]: jump_from_loader_to_app_PIC16F1704_new ok
May 10 16:12:41 (none) local0.notice cgminer[963]: jump_from_loader_to_app_PIC16F1704_new ok
May 10 16:12:41 (none) local0.notice cgminer[963]: reset_all_hash_board_low 0
May 10 16:12:41 (none) local0.notice cgminer[963]: pic_heart_beat_func_new
May 10 16:12:41 (none) local0.notice cgminer[963]: every_chain_enable_PIC16F1704_dc_dc_new
May 10 16:12:42 (none) local0.notice cgminer[963]: enable_PIC16F1704_dc_dc_new ok
May 10 16:12:42 (none) local0.notice cgminer[963]: enable_PIC16F1704_dc_dc_new ok
May 10 16:12:42 (none) local0.notice cgminer[963]: enable_PIC16F1704_dc_dc_new ok
May 10 16:12:43 (none) local0.notice cgminer[963]: reset_all_hash_board_high 0
May 10 16:12:43 (none) local0.notice cgminer[963]: tty_init
May 10 16:12:43 (none) local0.notice cgminer[963]: tty_init_chain
May 10 16:12:43 (none) local0.notice cgminer[963]: tty_init_chain chainid = 0
May 10 16:12:43 (none) local0.err cgminer[963]: create rx read thread for chain 0 ok
May 10 16:12:43 (none) local0.notice cgminer[963]: Start A New Asic Response.Chain Id:[0]
May 10 16:12:44 (none) local0.err cgminer[963]: create tx read thread for chain 0 ok
May 10 16:12:44 (none) local0.notice cgminer[963]: open device over
May 10 16:12:44 (none) local0.notice cgminer[963]: tty_init_chain
May 10 16:12:44 (none) local0.notice cgminer[963]: tty_init_chain chainid = 1
May 10 16:12:44 (none) local0.err cgminer[963]: create rx read thread for chain 1 ok
May 10 16:12:44 (none) local0.notice cgminer[963]: Start A New Asic Response.Chain Id:[1]
May 10 16:12:44 (none) local0.err cgminer[963]: create tx read thread for chain 1 ok
May 10 16:12:44 (none) local0.notice cgminer[963]: open device over
May 10 16:12:44 (none) local0.notice cgminer[963]: tty_init_chain
May 10 16:12:44 (none) local0.notice cgminer[963]: tty_init_chain chainid = 2
May 10 16:12:44 (none) local0.err cgminer[963]: create rx read thread for chain 2 ok
May 10 16:12:44 (none) local0.notice cgminer[963]: Start A New Asic Response.Chain Id:[2]
May 10 16:12:44 (none) local0.err cgminer[963]: create tx read thread for chain 2 ok
May 10 16:12:44 (none) local0.notice cgminer[963]: open device over
May 10 16:12:47 (none) local0.notice cgminer[963]: set_baud: bt8d = 1
May 10 16:12:47 (none) local0.notice cgminer[963]: check_every_chain_asic_number
May 10 16:12:47 (none) local0.notice cgminer[963]: check_asic_reg: check chain J0 
May 10 16:12:49 (none) local0.notice cgminer[963]: check_asic_reg: chain J0 has 45 ASIC
May 10 16:12:49 (none) local0.notice cgminer[963]: check_asic_reg: check chain J1 
May 10 16:12:50 (none) local0.notice cgminer[963]: check_asic_reg: chain J1 has 45 ASIC
May 10 16:12:50 (none) local0.notice cgminer[963]: check_asic_reg: check chain J2 
May 10 16:12:52 (none) local0.notice cgminer[963]: check_asic_reg: chain J2 has 45 ASIC
May 10 16:12:53 (none) local0.notice cgminer[963]: calculate_address_interval:addrInterval = 5
May 10 16:12:53 (none) local0.notice cgminer[963]: set_frequency: frequency = 518
May 10 16:12:53 (none) local0.notice cgminer[963]: PLL : 53 2 2 1
May 10 16:12:53 (none) local0.notice cgminer[963]: PLL : 53 2 2 1
May 10 16:12:53 (none) local0.notice cgminer[963]: PLL : 53 2 2 1
May 10 16:12:53 (none) local0.notice cgminer[963]: software_set_address_chain: chain 0 has 45 ASIC, and addrInterval is 5
May 10 16:12:53 (none) local0.notice cgminer[963]: Now Set [0] Chain Address
May 10 16:12:54 (none) local0.notice cgminer[963]: software_set_address_chain: chain 1 has 45 ASIC, and addrInterval is 5
May 10 16:12:54 (none) local0.notice cgminer[963]: Now Set [1] Chain Address
May 10 16:12:54 (none) local0.notice cgminer[963]: software_set_address_chain: chain 2 has 45 ASIC, and addrInterval is 5
May 10 16:12:54 (none) local0.notice cgminer[963]: Now Set [2] Chain Address
May 10 16:12:55 (none) local0.notice cgminer[963]: bitmain_V9_init: fan_eft : 1  fan_pwm : 43
May 10 16:12:55 (none) local0.notice cgminer[963]: frequency = '518'
May 10 16:12:55 (none) local0.notice cgminer[963]: dev.timeout = 1905 us
May 10 16:12:57 (none) local0.notice cgminer[963]: every_chain_get_PIC16F1704_voltage_new
May 10 16:12:57 (none) local0.notice cgminer[963]: get_PIC16F1704_voltage_new: read_back_data[0] = 0x5, read_back_data[1] = 0x18, read_back_data[2] = 0x80, read_back_data[3] = 0x0, read_back_data[4] = 0x9d
May 10 16:12:57 (none) local0.notice cgminer[963]: get_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:12:57 (none) local0.notice cgminer[963]: every_chain_get_PIC16F1704_voltage_new Chain 0 voltage 128
May 10 16:12:58 (none) local0.notice cgminer[963]: get_PIC16F1704_voltage_new: read_back_data[0] = 0x5, read_back_data[1] = 0x18, read_back_data[2] = 0x80, read_back_data[3] = 0x0, read_back_data[4] = 0x9d
May 10 16:12:58 (none) local0.notice cgminer[963]: get_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:12:58 (none) local0.notice cgminer[963]: every_chain_get_PIC16F1704_voltage_new Chain 1 voltage 128
May 10 16:12:58 (none) local0.notice cgminer[963]: get_PIC16F1704_voltage_new: read_back_data[0] = 0x5, read_back_data[1] = 0x18, read_back_data[2] = 0x80, read_back_data[3] = 0x0, read_back_data[4] = 0x9d
May 10 16:12:58 (none) local0.notice cgminer[963]: get_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:12:58 (none) local0.notice cgminer[963]: every_chain_get_PIC16F1704_voltage_new Chain 2 voltage 128
May 10 16:12:58 (none) local0.notice cgminer[963]: every_chain_set_PIC16F1704_voltage_new
May 10 16:12:59 (none) local0.notice cgminer[963]: set_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:12:59 (none) local0.notice cgminer[963]: every_chain_set_PIC16F1704_voltage_new Chain 0 voltage 128
May 10 16:12:59 (none) local0.notice cgminer[963]: set_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:12:59 (none) local0.notice cgminer[963]: every_chain_set_PIC16F1704_voltage_new Chain 1 voltage 128
May 10 16:13:00 (none) local0.notice cgminer[963]: set_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:13:00 (none) local0.notice cgminer[963]: every_chain_set_PIC16F1704_voltage_new Chain 2 voltage 128
May 10 16:13:11 (none) local0.notice cgminer[963]: every_chain_restore_PIC16F1704_voltage_new
May 10 16:13:11 (none) local0.err cgminer[963]: cgminer time error total_secs = 1589127191.358832 last_total_secs = 1.000000
May 10 16:13:12 (none) local0.warn cgminer[963]: Pool 0 stratum+tcp://de.ckpool.org:3333 alive, testing stability
May 10 16:13:12 (none) local0.warn cgminer[963]: Switching to pool 0 stratum+tcp://de.ckpool.org:3333
May 10 16:13:17 (none) local0.warn cgminer[963]: API running in IP access mode on port 4028 (7)
May 10 16:13:31 (none) local0.notice cgminer[963]: set_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:13:31 (none) local0.notice cgminer[963]: every_chain_restore_PIC16F1704_voltage_new Chain 0 voltage 128
May 10 16:13:32 (none) local0.notice cgminer[963]: set_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:13:32 (none) local0.notice cgminer[963]: every_chain_restore_PIC16F1704_voltage_new Chain 1 voltage 128
May 10 16:13:33 (none) local0.notice cgminer[963]: set_PIC16F1704_voltage_new ok, voltage = 0x80
May 10 16:13:33 (none) local0.notice cgminer[963]: every_chain_restore_PIC16F1704_voltage_new Chain 2 voltage 128
May 10 16:26:42 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 1 failed!
May 10 16:26:42 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x7, read_back_data[1] = 0x1, read_back_data[2] = 0x1, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:27:32 (none) local0.err cgminer[963]: Temperature 85 is higher than 85'C for 1 time, PWM is 43
May 10 16:27:33 (none) local0.err cgminer[963]: Temperature 85 is higher than 85'C for 2 time, PWM is 43
May 10 16:27:49 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 1 failed!
May 10 16:27:49 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x17, read_back_data[2] = 0x17, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:28:01 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 2 failed!
May 10 16:28:01 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x17, read_back_data[2] = 0x17, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:36:14 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 0 failed!
May 10 16:36:14 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0xff, read_back_data[1] = 0xff, read_back_data[2] = 0xff, read_back_data[3] = 0xff, read_back_data[4] = 0xff, read_back_data[5] = 0xff
May 10 16:37:44 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 0 failed!
May 10 16:37:44 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x16, read_back_data[2] = 0x15, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:37:55 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 0 failed!
May 10 16:37:55 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x17, read_back_data[1] = 0x17, read_back_data[2] = 0x1, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:38:07 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 1 failed!
May 10 16:38:07 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x18, read_back_data[1] = 0x18, read_back_data[2] = 0x1, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:38:17 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 0 failed!
May 10 16:38:17 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x16, read_back_data[2] = 0x15, read_back_data[3] = 0x15, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:38:18 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 2 failed!
May 10 16:38:18 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x18, read_back_data[1] = 0x18, read_back_data[2] = 0x1, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:38:29 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 1 failed!
May 10 16:38:29 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x16, read_back_data[2] = 0x15, read_back_data[3] = 0x15, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:38:40 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 0 failed!
May 10 16:38:40 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x19, read_back_data[1] = 0x19, read_back_data[2] = 0x1, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:38:52 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 1 failed!
May 10 16:38:52 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x19, read_back_data[1] = 0x19, read_back_data[2] = 0x1, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:39:02 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 0 failed!
May 10 16:39:02 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x16, read_back_data[2] = 0x15, read_back_data[3] = 0x15, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:39:48 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 2 failed!
May 10 16:39:48 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x16, read_back_data[2] = 0x19, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:40:10 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 0 failed!
May 10 16:40:10 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x16, read_back_data[2] = 0x19, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:42 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:40:44 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new chain 1 failed!
May 10 16:40:44 (none) local0.err cgminer[963]: heart_beat_PIC16F1704_new: read_back_data[0] = 0x6, read_back_data[1] = 0x15, read_back_data[2] = 0x15, read_back_data[3] = 0x0, read_back_data[4] = 0x0, read_back_data[5] = 0x1d
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
May 10 16:41:28 (none) local0.warn cgminer[963]: get_asic_response: nonce fifo full!!!
362  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining 255 blocks solved! on: May 12, 2020, 05:42:29 PM
Quote from: vickersja on May 12, 2020, 05:37:03 PM
So just to be clear, is it ok to mine on CK Pool Solo pre and during the transition to the new server, or will the move cause a disruption?  Also, will any of the addresses change?

I would guess there will be some downtime during the switch but i'm sure CK will let us know what will happen once he's ready with the new sever.

363  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining 255 blocks solved! on: May 12, 2020, 05:28:39 PM
Times like this we really do see how strong a community we have here wish I had saved some merits to hand out to everyone.

Long live the SOLO pool! Smiley Smiley
364  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining 255 blocks solved! on: May 12, 2020, 04:41:19 PM
I will chuck in 0.01 too but will need to be the 18th or there about's  Cheesy

Saved the address will let you know when I send my share in.
365  Bitcoin / Bitcoin Discussion / Re: What is stopping people from running their own full node? on: May 12, 2020, 04:17:57 PM
I always wondered why miners don't take the block reward and the fee's should go to the node I think that would be a very good way to incentive's people spinning up nodes if they we're to be the node that is first to broadcast the block they would get a reward for it.

Probably some downside to this idea but it would be something to ensure node's which are key parts of the network would be a reward to run.
366  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining 255 blocks solved! on: May 12, 2020, 01:36:15 PM
I will throw my contribution in on the 18th pockets are a little light after the 15 LTC rental but will throw into the pot on that date Smiley
367  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining 255 blocks solved! on: May 12, 2020, 12:56:32 AM
The above post's by mikeywith and Philipma both are great starting points going forward.

And it sure looks like there is support from the community to ensure it stay live.

I too would be willing to throw something into the pot to help with costs.
368  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 11, 2020, 07:41:26 PM
Quote from: philipma1957 on May 11, 2020, 07:36:29 PM
antpool (yeah right) gets the historic 630000 block

6.25 + 0.90 = 7.15 coins

next ½ ing in 210,000 blocks.

around 2024 Nov

Was just thinking this myself trust it to be them to get that block f2pool had a fair few in a row on the run up to it.
369  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 11, 2020, 06:40:54 PM
Quote from: Mr.merson on May 11, 2020, 06:38:47 PM
Quote from: jimjam123 on May 11, 2020, 06:31:12 PM
Quote from: madmartyk on May 11, 2020, 06:28:50 PM
What are all those large farms going to do after halving?  Income cut in half!!  Cheesy

Lots and Lots of them shutting down i would assume.


I hope it is the opportunity to buy a s9 a good price  Grin


Bitmain are selling them for like $63.00 right now
370  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 11, 2020, 05:49:59 PM
Quote from: philipma1957 on May 11, 2020, 05:41:58 PM
Quote from: rasmukri on May 11, 2020, 05:32:17 PM
Quote from: philipma1957 on May 11, 2020, 05:23:54 PM
Quote from: -ck on May 11, 2020, 02:12:12 AM
Just for the record, here is me reimbursing the affected user:
https://btc.com/84e2faf3615923c2c5591fd2a91fa62e07effca4c4a277fd45221d0faae03236



which address is his I am going to send him a bit of coin.

Thanks bro that's nice of you my address is the 1PBchjo22ED1BYdApt6xkyi5vRaiEcpCKn

I matched the 0.01012948

https://btc1.trezor.io/tx/8366c1563f7705981329158ffef4d2ccfa47747cfce8474d38fcf5ac578998f1

best I can do.

It is a sad day in the of bitcoin.  Still 8 blocks to go maybe it ends on and up side Cry

Very noble of you Philip would love to see a block fall before we drop reward and would probably lift the spirits of us all Smiley

Come On Bitcoin!!! Smiley
371  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 11, 2020, 05:19:02 PM
10 BLOCKS TO GO!!  Shocked
372  Bitcoin / Development & Technical Discussion / Re: Creating semi-nodes to sustain the network on: May 11, 2020, 02:39:13 PM
Really we do put some trust in central servers in the codebase with the use of the DNS seeds those nodes are normally what a new node will connect to in most cases so we already have some hard coded nodes in the codebase to trust when connecting to the network  I think the above is a very interesting idea and is worthy of more discussion.  Great topic!
373  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 11, 2020, 02:05:38 PM
Less than 60 blocks to go guys!

Great to see the community spirit here come on we need 1 more block to get to 256 blocks solved the magical 256 number!!

Come on bitcoin don't let us down!

Code:
"hashrate1m": "2.5T",
 "hashrate5m": "2.41T",
 "hashrate1hr": "2.42T",
 "hashrate1d": "32.9T",
 "hashrate7d": "155T",
 "lastshare": 1589205685,
 "workers": 2,
 "shares": 67205693876,
 "bestshare": 309430998061.3869,

Still no budge from 309 Billion for me i'm afraid!
374  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 11, 2020, 12:33:50 AM
That would need to be something that could be discussed in the community if there was interest to continue under such a model of operation.

There are many a good member who has contributed in the topics over the years that I would say both have the skills and the understanding to operate a pool but again this is something we could try solve as a community to keep the project alive.
375  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 11, 2020, 12:11:28 AM
Quote from: -ck on May 10, 2020, 11:57:59 PM
In addition, I've made publicly available the code as used by this solo pool now as well:
https://bitbucket.org/ckolivas/ckpool-solo

Bear in mind it expects certain customisations and I will take no responsibility if someone misuses this in the community and creates a new solo pool with it, but perhaps someone skilled enough can fill the gap with it from me closing this pool.

What about we make it a community pool? It would be a real shame to lose both the solo and main pools there a staple on bitcointalk for a lot of members and with the halving around the corner and price uncertainty things could change really quickly in the mining game and it would be a shame not to have this resource here if that we're to happen.

i'm sure a few of us regulars might pitch in to ensure it's continuation.

376  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 10, 2020, 11:49:46 PM
I will also shout 2 BTC shout from me to the lost block fund if I hit highly unlikely though,  but as above, stranger things have happened!

Also very sad to know that you will be closing the pool's CK i'm sure a lot of us really value your service to the community over the years.

A very sad day indeed. 
377  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 10, 2020, 11:41:10 PM
pretty speechless myself terrible news for the miner and CK.

 Shocked
378  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 10, 2020, 08:39:59 PM
Quote from: rasmukri on May 10, 2020, 08:24:17 PM
Quote from: MagicByt3 on May 10, 2020, 07:15:07 PM
Would it not show as a stale in his screen shot? looks like his stale value is 0

At first I thought this was going to be some edited screen shot but the numbers there on the pool to see and if it was a orphan that's very unlucky but I can't see any orphan blocks on any online stats.




I mean my luck is usually shit so when I opened the miner and saw 2  found blocks in 13 hours I was crazy excited but then my wallet only has the same 1.2 btc was like oh hell the fuck no this is bullshit on a planet of fucking garbage  yup lady luck is not my friend it would seem.

To find 2 in a row would be astronomical odds and to do so in 13 hours would make those odd's even higher.

Best person who can answer this is the pool OP as already stated.
379  Alternate cryptocurrencies / Altcoin Discussion / Re: Generate bitcoin genesis block with more than 1 address on: May 10, 2020, 08:23:08 PM
Quote from: khaba on May 10, 2020, 07:32:38 PM
Hello. I would like generate bitcoin genesis block with 10 coins for 5 different addresses in 1 block instead 50 coins for 1 address. Anybody know how to do this? Any ideas?

Add this to your main.cpp file this is for scrypt based coins but you can edit it to be for SHA256 if you require this will mine your genesis block and spit out the hash into the debug.log

This is a very old method of doing this.

Good luck.

Code:
if (false && block.GetHash() != hashGenesisBlock)
        {
            printf("Searching for genesis block...\n");
            // This will figure out a valid hash and Nonce if you're
            // creating a different genesis block:
            uint256 hashTarget = CBigNum().SetCompact(block.nBits).getuint256();
            uint256 thash;
            char scratchpad[SCRYPT_SCRATCHPAD_SIZE];
 
            loop
            {
#if defined(USE_SSE2)
                // Detection would work, but in cases where we KNOW it always has SSE2,
                // it is faster to use directly than to use a function pointer or conditional.
#if defined(_M_X64) || defined(__x86_64__) || defined(_M_AMD64) || (defined(MAC_OSX) && defined(__i386__))
                // Always SSE2: x86_64 or Intel MacOS X
                scrypt_1024_1_1_256_sp_sse2(BEGIN(block.nVersion), BEGIN(thash), scratchpad);
#else
                // Detect SSE2: 32bit x86 Linux or Windows
                scrypt_1024_1_1_256_sp(BEGIN(block.nVersion), BEGIN(thash), scratchpad);
#endif
#else
                // Generic scrypt
                scrypt_1024_1_1_256_sp_generic(BEGIN(block.nVersion), BEGIN(thash), scratchpad);
#endif
                if (thash <= hashTarget)
                    break;
                if ((block.nNonce & 0xFFF) == 0)
                {
                    printf("nonce %08X: hash = %s (target = %s)\n", block.nNonce, thash.ToString().c_str(), hashTarget.ToString().c_str());
                }
                ++block.nNonce;
                if (block.nNonce == 0)
                {
                    printf("NONCE WRAPPED, incrementing time\n");
                    ++block.nTime;
                }
            }
            printf("block.nTime = %u \n", block.nTime);
            printf("block.nNonce = %u \n", block.nNonce);
            printf("block.GetHash = %s\n", block.GetHash().ToString().c_str());
        }
380  Bitcoin / Pools / Re: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! on: May 10, 2020, 07:15:07 PM
Would it not show as a stale in his screen shot? looks like his stale value is 0

At first I thought this was going to be some edited screen shot but the numbers there on the pool to see and if it was a orphan that's very unlucky but I can't see any orphan blocks on any online stats.


Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [19] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 »
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!