.175 NERD  Yes it's mine... -Dave |
|
|
|
The BitcoinCash price seems to be reading the wrong price. It's showing $150 USD
There are a few other coins that are also off vs. CoinMarketCap / exchange pricing.
Is this an API call error to the servers or something else.
-Dave
*No I don't remember the other coins I had scrolling. I saw BCH was wrong and then I noticed another was off by 30% so I reset it without taking notes as to what I had saved.
Hey Dave, The ticker currently uses : https://cryptofolio.info/welcome/coinsList - as the price source. I’m not sure if it is being updated or not, but it’s not using CoinMarketCap which is why you are seeing a discrepancy. Hope that helps. Thanks! Are you sure that is where it gets it's info? At a quick glance LTC, PPC, NMC are all way off. -Dave |
|
|
|
|
The BitcoinCash price seems to be reading the wrong price. It's showing $150 USD
There are a few other coins that are also off vs. CoinMarketCap / exchange pricing.
Is this an API call error to the servers or something else.
-Dave
*No I don't remember the other coins I had scrolling. I saw BCH was wrong and then I noticed another was off by 30% so I reset it without taking notes as to what I had saved.
|
|
|
|
Due to all the other alt-coin nodes, I think that script is running a bit behind. We're still working on updating the explorer daemon. The network tab does not seem to be enabled it has to be set to "network": true in settings.json for the feature to show up if i remember correct, but it's been a while since I set up the iquidus explorer.  http://explorer.noodlyappendagecoin.net/network/I have it disabled as I could not get it to sync the peer list for some reason. -Dave |
|
|
|
|
Very slowing working on it.
I try to carve out a few hours every week to make changes and test. You can't see it on the public facing side, but it is there. I just keep the testing on the private lan, this way if I have to kill it the "real" explorer is still up and running.
-Dave
|
|
|
|
can anybody help, it will not work I start it unter Windows 7 and Windows 10 and get the same error message i test it with -d 0:0 / -d 0:1 / -D 0:0 / -D 0:1, same error oclvanitygen.exe -d 0:0 1WiLLi
Difficulty: 15318045009
Compiling kernel, can take minutes...vg_ocl_context_callback error: Build program failure.
failure.
clBuildProgram: CL_BUILD_PROGRAM_FAILURE
Build log:
1:173:19: error: constant address space qualified variables are required to be initialized
Device: Intel(R) HD Graphics 520
Vendor: Intel(R) Corporation (8086)
Driver: 20.19.15.4444
Profile: FULL_PROFILE
Version: OpenCL 2.0
Max compute units: 24
Max workgroup size: 256
Global memory: 1360632218
Max allocation: 340158054
Available OpenCL platforms:
0: [Intel(R) Corporation] Intel(R) OpenCL
0: [Intel(R) Corporation] Intel(R) HD Graphics 520
1: [Intel(R) Corporation] Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz
The intel graphics do not support open CL you need an AMD or Nvidia card. -Dave |
|
|
|
I have a hotels.com egift card that I am looking to sell.
$200 BTC gets you a $250 Code & PIN
Why the cheap price?
When hotels.com works it's great.
When there is an issue, their customer service is a f--king joke.
I am tired of dealing with the problems.
-Dave
yo, this still available? Yes. Still here. -Dave |
|
|
|
|
Bitcointalk Username: DaveF
BTC Address for payouts: 1ASBTFvxXXwYFMPGStTHwpLpBCE9QX5URe
Thanks,
Dave
|
|
|
|
|
I'll take #125 and #200
Thanks,
Dave
|
|
|
|
|
Monday AM bump.
Prince now dropped to $150.
-Dave
|
|
|
|
Title says it all. Got it in for someone who backed out of the deal. In hand in the USA. $165 $150 gets it to you anywhere in the lower 48.   -Dave |
|
|
|
What is the deal with the soldering on bitmain's hardware? The R4's and S9's both have those sometimes poorly-soldered inductors - the big orange/red things with two solder spots 'underneath'.
On two of my R4 boards one set has the inductor leads smooth and almost flush with the board and on another one the leads are poking out several mm away from the surface of the solder joint. What on earth!?
Consistently inconsistent.
Someone's message was deleted as it was probably spam so my response was deleted as well.
Hopefully it won't be flagged this time!
I will be amazed if Bitmain ever comes out with another batch of the R4's.
I will also be pretty happy to pay them for such a batch if they can ensure better reliability. R4's are awesome in terms of sound level and efficiency.
I am slowly prototyping some scroll fan style cooling across solid aluminum and copper blocks on things like Avalon and S9 designs. I'm not sure if there's just too much heat on the newer boards or if the design of the long r4 boards was the reason it would work with a scroll/ac style fan.
I've been able to repair several of these with limited knowledge and have good success repairing the 6 pin pci-e connectors.
One board I haven't repaired yet is strange - the power light on the board is flickering intermittently, not with a pattern or anything. Does this sound more like a reflow kind of thing or could an inductor or cap be crapping out causing that?
Very poor quality. I have had several top boards die due to them being hotter (heat rises, who knew). Some people have repaired them with new caps, some had the voltage regulator go poof. I would try caps and then reflow 1st, then start tracing the voltage back. It's way above what I can do, but those are the reports from the people who worked on them. -Dave |
|
|
|
On Titan Coin telegram channel they said that a private sale has started from 14 October to 14 November. Following the private sale they plan to list Titan Coin on several exchanges.
Cool, thanks for the update. Too many telegram channels to follow and too little time to do it in. -Dave |
|
|
|
|
Been meaning to ask, where in Brooklyn are you?
The address you give is for a nice insta office. Since I don't think they would like you doing prototyping & soldering there I am guessing that you have an assembly place somewhere nearby. I'm on LI in eastern Nassau so even though I chose to have it shipped it might be nice to stop over and talk one day. That is, if either one of us can ever find that mythical thing called "free time".
-Dave
|
|
|
|
I think Fan 3 was taken off a small jet :-) Seriously, anyone have any idea on what can be causing it so show that speed? Temps are good, it's been up and mining for 2 weeks now since I last changed pools. Checked in today to verify all was good as I got a notification from my secondary pool and saw the speed of a fan that does not exist.  Thanks, Dave |
|
|
|
Title says it all. You get all four, for BTC.015 shipped in the US. All other places add BTC.0025 and it will take an extra few days since I have to drive to the post office. No, I do not have the peeled holograms, they are long gone.     If you have any questions ask. Thanks, Dave |
|
|
|
Not to put pressure on the people who are working on the client, but I think we need a new one now.
New client and instructions were posted this past week. As stated a few weeks ago, I don't have a machine I can compile on. Unless I missed it (entirely possible) you just posted a windows exe file. The explorer is on a Linux box. I'll throw up a windows VM and get your client and the bootstrap and go from there. Give me a day or two and it should be be back and synced. -Dave |
|
|
|
|
Show Posts
