Latest posts of: taserz

Show Posts
Pages: « 1 2 3 4 5 6 7 [8] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 »

141

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 31, 2020, 10:11:29 AM

Quote from: favebook on January 30, 2020, 10:47:42 PM I'd bet it is S17+ S17 non pro Quote from: favebook on January 30, 2020, 10:47:42 PM I wouldn't mind, but if it is in emerged oil or in -20C, then it might be misleading. Air-cooled -30 or -35C if memory is correct. Quote from: Dodgymon on January 31, 2020, 07:49:49 AM The bigger question is what are you doing on viabtc? I assume your mining btrash or her ugly sister? P.S. I love the new FW BTW good job! Jajajajajaj xaxaxaxa hahahahaha. Got to make sure it works with all the pools! Granted we are aware we just broke functionality with .9.9 update on Bitcoin.com and NiceHash. Next update will fix that.

142

Alternate cryptocurrencies / Mining (Altcoins) / Firmware for S17 - 100th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 30, 2020, 07:07:43 PM

Antminer S17, T17, and S9 free custom firmware! Actual individual chip tuning not fake like the others. If you own a mining farm/hotel or have a large number of S17 or T17 500+ contact me for a better deal and to hear about our partnership program. Asic.to has developed a firmware for the Antminer S17/S17 Pro and T17 Antminer. You can download and install it on your machine to improve your profits. Antminer S17 / T17 Overclocking Performance ~+30% The ability to downvolt ~ 15-25% Antminer S17(normal) to 70-85-100th/s (~3100-3760-4000w) Antminer T17 up to 65th/s (consumption ~ 3000W) Antminer T17 Downvolts to 1900w at 42th/s - 45w/th (Attention! Firmware is still new, in order to avoid breakdowns it is recommended to increase overclock slowly.) Features Overclocking: over 85th/s with S17 and 65th/s T17! ASICboost and autotuning: On all of our versions include auto-tuning frequency to get the best efficiency as well as utilizing ASICboost. Decrease Hardware Errors ENERGY SAVING No Bmminer Immersion-ready/Fan Disable: Support for high-efficiency liquid immersion cooling by disabling the fan in the settings. Lower Thermal Threshold: Lowers default overheat protection to ensure machines last longer. Full-farm deployment: Send out a configuration file to an unlimited number of miners on the same network. No reboot required! Power monitoring: Built-in wattmeter function. Search: Find Other Asic on the network. Password Change: Ability to mass change passwords and ssh port. Multi-ASIC roll-out: Setup one machine and install it on all of them with just 1 click. Free – Download and begin using immediately. Small 2.8% fee to keep the project going. Supports popular ASICs: Support for all Antminer S17/T17,S9/S9i/S9j models. Stable: Automated voltage tuning for best hashboard stability and performance. Sleep Mode: Mining can stop and fans drop to normal speed using very little power. Asic Virus Scanner: Tool that checks pre-owned asics for night switcher and other variants. Easy Uninstallation Check out: https://asic.to/antminer-s17-t17-optimized-firmware/ Notice you need to unlock SSH for the S17 and T17 models. Click here for instructions on how to unlock SSH. Notice: When using chip Manual Tune. DO NOT increase chip frequency above 20% of base frequency of board. Just use AutoTune!!! Please Take Notice As we all should know my now tampering with your machines can damage the machine. Do so at your own risk... But have fun! TO THE MOON Quote from: Philipma1957cellphone on December 29, 2019, 10:27:37 PM My Kia forte can do just over 100 miles an hour on a slight downhill straight way. I did it one time. I don't push it. Same with mining gear. edit: I have been notified someone is possibly impersonating on telegram. Telegram chat for assistance: https://t.me/AsicTo 1) The autotune work has been finalized and fully adjusted. 2) Completely rewritten algorithm for adjusting the voltage of the chips. 3) Improved method for controlling unbalanced domains. 4) Adjusted and fully customized profiles. 5) Added compatibility with BTC Tools version 1.2.6. 6) Fixed config multiplier with batch propagating workers. 7) Added pool support for nicehash.com. Cool Added pool support for warphash.com. 9) Checked and fixed stability of the emcd.io pool New release, 0.9.8_beta for Antminer S17 & T17 models What is done: 1. General stability 2. Extended and refactored the main driver. 3. The next iteration of refinement and improvement of errors (HW) 4. Hash rate loss on some pools was analyzed and fixed. 5. Added support for P2P pool. 6. Activated the multiplier for the distribution of mass batch configs. 7. Work on with the reading of temperature sensors I2C 8. Created more than 10 overclocking profiles. 9. Added autotune!!! (note, autotune results are saved in a separate config, when changing a profile to a new one and returning to the previous profile, a repeated autotune is not required, except for a forced retune by the user). After the completion of the tune, “temporarily” changes to the chips in the manual section of gui are not displayed. 10. Autotune is taken out as a separate log in the profiles section. 11. Automatic reboot when unbalancing domains to save chips from burnout. 12. Added manual downgrade of the entire domain.

143

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 30, 2020, 06:37:18 PM

I don't want to make a misleading title on this thread but... Can I advertise it as 102+th/s firmware mod now While we are at it take a look at the 80x club

144

Bitcoin / Mining support / Re: T17/S17 malfunction: cases, solutions, remedies, RMA history

on: January 30, 2020, 01:24:28 PM

Quote from: akagi82 on January 28, 2020, 09:07:26 AM shipment of 30 T17 42TH 3 problems units: 1) Wont detect hashboard from new, mines with 2 2) After a month, temperature sensor problem and entire machine wont hash 3) Solid Red and Green light If anyone has solutions to 1 and 3 please reply. Number 2.... IS SO COMMON... I hate it

145

Bitcoin / Mining support / Re: "MP TEST FIRMWARE!" on S17 / T17 series control board?

on: January 30, 2020, 01:23:57 PM

Yes it's a demo firmware not used for mining. Flash to Asic.to firmware after you are on it to control stuff

146

Bitcoin / Mining support / Re: Antminer S9 "Locate" code

on: January 30, 2020, 01:23:10 PM

Quote from: Artemis3 on January 19, 2020, 06:52:31 PM No, he wants to force flash the LEDs so you are able to physically "locate" a miner within a bunch of running miners. BraiinsOS has this in the UI and with the cli command `miner fault_light on`. Maybe he wants to do it with factory firmware... Block it in the firewall so it lights flash or don't light up for network activity maybe?

147

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 30, 2020, 07:36:31 AM

Quote from: Ripster on January 29, 2020, 08:34:17 PM same issue on both versions, Correct says same thing as kernel log, Error failed to set voltage, then says starting autotune, finding voltage then again error failed to set voltage. ive tried 3 of your profile settings, all with the same result, it wont hash at all with your firmware, with bitmains firmware its perfect, however the chains do have a discrepancy which i think you firmware dosent like https://imgur.com/IocLzA6 As you can see Chain 1 is always about 0.5 volts higher then the other ones, on my other t17 there within 0.1 volts of each other, and that one has no issues with your firmware But clearly the chain is perfectly functional because its rock solid at 41-42 th on bitmains firmware So we worked on a new version that should fix your issue. This new update it is supposed to fix the machines that also failed to autotune. So far it's fixed every autotune issue we have seen. Changes: 1) The autotune work has been finalized and fully adjusted. 2) Completely rewritten algorithm for adjusting the voltage of the chips. 3) Improved method for controlling unbalanced domains. 4) Adjusted and fully customized profiles. 5) Added compatibility with BTC Tools version 1.2.6. 6) Fixed config multiplier with batch propagating workers. 7) Added pool support for nicehash.com. Added pool support for warphash.com. 9) Checked and fixed stability of the emcd.io pool https://asic.to/files/Firmware/S17/Antminer-S17-0.9.9-beta.tar.gz https://asic.to/files/Firmware/T17/Antminer-T17-0.9.9-beta.tar.gz You and a few others were having issues with voltage and frequency tuning and this should fix it. Also, I suggest powering down your machine for a few minutes and powering back up to drain power in the machines if it fails to drop power voltage. If this update doesn't fix it please click download button in kernel log and upload so I can read the kernel log to see what is causing the issue

148

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 29, 2020, 04:05:07 AM

Quote from: Ripster on January 28, 2020, 04:21:31 PM Would it be possible for some people to post on what results there getting? Even with the new auto-tune update i keep getting the voltage error as seen on my earlier post, ive let it got for 4-5 hours, same thing, never hashes at all, with bitmain's firmware its flawless at 42TH https://imgur.com/kVT1ghU im at 16.8-17.2 amps for a pair of T17's, If im correct that 2050 watts per miner or 49 watts per TH any help is always appreciated What does the autotune log say under mining profile? Same for the kernel log? I wonder if it has a chip that is unstable at voltage and it keeps trying to adjust. Try a slightly faster preset so it increases base voltage a little bit. Did you have this issue with the .96 beta or only the latest .98 autotune beta?

149

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 28, 2020, 01:31:07 AM

Yeah I was about to say the same most people can throw 48th/s at a T17 without a problem.

150

Bitcoin / Mining support / Re: T17/S17 malfunction: cases, solutions, remedies, RMA history

on: January 27, 2020, 04:09:32 AM

Quote from: favebook on January 15, 2020, 09:59:22 PM My S17e has been running for quite some time without any real problems. Maybe once it dropped the hashrate to 0 but that is a problem I could not repeat and I am not sure what caused it so I cannot blame the unit for it (for now). My T17e has just arrived and I will update you if I have any problems with it. However, I think I have posted about this somewhere already but I'll say it again here... My S17 Pro which arrived during May or June if I remember correctly had 2 dead hashboards after running on Turbo mode for 2 months. I had it RMA-ed and it comunication was fast as well as the process. I lost about 6 days (including 2 non-working days) of mining and most of those were due to shipping. I shipped from Serbia to Netherlands and it cost me around 150$ if I remember correctly. However, due to our utterly BAD customs, I had to pay 20% VAT on already imported unit. So that RMA cost me alot. And after 5 months of that unit working perfectly, that unit lost all three hashboards and now only if I reboot it a DOZEN times, sometimes one hashboard comes alive and if I am lucky, 2 will come alive, third one seems to be dead as a doornail. I would RMA it again, but I would have to pay another 20% VAT due to problem I previously noted and that is way too expensive considering that my unit is now out of warranty and 20% is calculated for price I paid it in middle of 2019 which is around 2500$ if I remember correctly. I'd like to note that using Taserz custom firmware for S17 Pro helped me regain some speed as it is now running at 38TH/s with 2 hashboards. Ayyyyy I still think you should fight the vat on a warranty item. Also I am seeing a lot of bad temp sensors on the new units... Which sucks because if they don't work it won't mine...

151

Other / Meta / Re: Another merit metric that could be considered in ranking.

on: January 26, 2020, 12:45:37 AM

152

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 25, 2020, 11:53:16 PM

Quote from: Ripster on January 25, 2020, 09:45:03 PM So that "Failed to verify avg chain voltage" and "failed to set working voltage" is normal, because in the profile page it says error and just trys again We are pushing out .98 beta too very soon I should have it posted by the end of the night. We found some users were having issues and auto-tune was going on for a long time. I am assuming that is what is happening for you.

153

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 44t@45w/t • AUTO-TUNE • Asic.to

on: January 25, 2020, 04:41:40 PM

Quote from: Ripster on January 25, 2020, 03:56:44 PM Good morning Taserz, thank you for the autotune, im trying one of your profiles and all im getting is this error https://ibb.co/TvrgY23 its rebooted like 10-15 times, will it correct it self or whats it doing? any suggestions would be greatly appreciated If you choose a preset it will auoto tune for over an hours while it sorts itself out. If you go to minerprofiles page on the bottom right it will give you the details on the Autotune and what round it is on. Every time it gets faster or draws less power until chips are stable. My S17 for example at 70th lasted 9 rounds of auto tuning

154

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 down to 45w • Asic.to The Moon

on: January 24, 2020, 11:38:35 PM

Hi algcool, can you pm me and send me your email or your telegram I would love to chat with you. I have to check on the hashrate for T17 as I only know the S17 off the top of my head. The settings you showed me looks like a patched bmminer or a fixed frequency overclock. Ours will outperform those numbers as we do tuning per chip. 1. Yes very stable we are doing our auto-tune beta and it should be out by the end of today. Our current firmware outperforms all other firmware we have seen online. This current update will make it far easier to use for big farms. 2. It supports S17/S17pro/T17. For the S17E/T17E/S17+/T17+ we will have a beta firmware ready for it in about a week. (it is already working we just need to package it up and fix a few things) I look forward to hearing back from you. AUTO TUNE UPDATE IS LIVE! https://asic.to/files/Firmware/S17/Antminer-S17-0.9.8.tar.gz https://asic.to/files/Firmware/T17/Antminer-T17-0.9.8.tar.gz New release, 0.9.8_beta for Antminer S17 & T17 models What is done: 1. General stability 2. Extended and refactored the main driver. 3. The next iteration of refinement and improvement of errors (HW) 4. Hash rate loss on some pools was analyzed and fixed. 5. Added support for P2P pool. 6. Activated the multiplier for the distribution of mass batch configs. 7. Work on with the reading of temperature sensors I2C 8. Created more than 10 overclocking profiles. 9. Added autotune!!! (note, autotune results are saved in a separate config, when changing a profile to a new one and returning to the previous profile, a repeated autotune is not required, except for a forced retune by the user). After the completion of the tune, “temporarily” changes to the chips in the manual section of gui are not displayed. 10. Autotune is taken out as a separate log in the profiles section. 11. Automatic reboot when unbalancing domains to save chips from burnout. 12. Added manual downgrade of the entire domain.

155

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 down to 45w • Asic.to The Moon

on: January 23, 2020, 09:06:14 PM

Quote from: tps_star on January 23, 2020, 08:11:12 PM Hi I have one T17 and will overclock with your firmware I need know if i update my miner with your firmware i can use Poolin or nichhash pools ? I can get 60th with t17 miner without problem and with air cooling ? Best regard I would say more like 50-55. IF you have extreme cold on air cooling you can do 60 but we are talking -10C

156

Bitcoin / Mining software (miners) / Re: Braiins OS: open-source mining firmware [S9, T1]. New release includes AsicBoost

on: January 20, 2020, 02:26:18 AM

Quote from: teslaman on December 05, 2019, 12:47:01 AM [...] There should be a target chip temp function where it keeps them at a certain temp.

157

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 down to 45w • Asic.to The Moon

on: January 15, 2020, 08:25:22 PM

Quote from: thierry4wd on January 11, 2020, 11:53:34 PM [...] No all the firmware is not the same. The vast majority of the firmware use the same stock bitmain driver which doesn't tune chips it tunes the hashboard. 75w/th is pretty much the lowest you can go on AVERAGE for a stock s9. You can get them down to 70w/th if you do the dual S9 firmware with 1psu 1controlboard 2 front fans no rear fans. Quote from: Ripster on January 12, 2020, 02:05:06 PM [...] I will power my unit on my test bench on tomorrow and tell you what settings I have I was trying to recreate it and I got very close Yeah our fans speed is a little wonky in this current version. Auto likes to max it out. Also as far as the timeline for an update we found 1 bug causing hashrate to slowly drop over time but we fixed it. We are just adding a few protection features to prevent it being cracked. Our developement team is currently on Holiday as Christmas overseas is on January 7th and they are on an extended holiday trip! A little update for those trying to install it. All the new hardware requires you to MICRO-SD card flash to downgrade them then you can just install our firmware. The files to put on the sd card can be found on our website. Those with older 17's that never did the bitmain updates the tool is the quicker route to installing it. If you own a mining farm/hotel or have a large number of miners 500+ contact me for a better deal than the default 2.8% fee and to hear about our partnership program.

158

Bitcoin / Hardware / Re: Bitmain introduces the Antminer S17 Pro, Antminer S17, and the Antminer T17

on: January 13, 2020, 05:08:44 AM

Quote from: Biodom on January 12, 2020, 08:32:09 PM Hey, does anybody know if S17+ or T17+ come from Malaysia or China? Thanks. Sometimes it tells you on checkout. Try to ship it to a HK address and if there is an option for EXPRESS SF click it. If it tells you it can't ship express SF it's coming from Malaysia. Then just change to your home address

159

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 down to 45w • Asic.to The Moon

on: January 11, 2020, 05:34:16 PM

Quote from: dm800pvr on January 11, 2020, 04:31:51 PM I'm afraid DevFee status is Dead Is that the reason each 10 min my t17 gets reset? Check if it is giving dev fee error. If it is it will stop working. Change the dev fee to a different location or something is blocking it if you get that error.

160

Bitcoin / Mining software (miners) / Re: Firmware for S17 - 85th/s and T17 - 65th/s T17 down to 45w • Asic.to The Moon

on: January 08, 2020, 04:46:10 PM

I mean not for nothing that 75w a th is the lowest setting most people can get and no other firmware comes close. If you think about it this was a over 100w/th unit at one point.

Pages: « 1 2 3 4 5 6 7 [8] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 »