Show Posts
|
Pages: « 1 2 3 [4] 5 6 »
|
64
|
Alternate cryptocurrencies / Service Announcements (Altcoins) / Re: Betarigs CryptoCurrency Mining Rental Services
|
on: December 02, 2015, 11:13:22 PM
|
Yep, they have cut and run looks like. No thread responses in almost a month, no support tickets getting responded too. Pretty sure they got trained by someone from Mt.Gox would be my opinion. Well, I suppose if that is what is going on we should all be understanding about it right? I mean after all its the Holiday season. They might as well have a good one and screw anyone else right?
|
|
|
66
|
Bitcoin / Mining software (miners) / Re: BFGMiner 5.4.1: GBT+Stratum, RPC, Mac/Linux/Win64, Antminer S1-S5, Block v4 solo
|
on: December 01, 2015, 10:11:55 PM
|
Well I am just gonna do regular mining and declare mining solo with network gear as something only the bitcoin gods are capable of. I have months of research and work time trying to get this going and haven't ever managed it. Fortunately I run my miners in place of the baseboard heaters here so my goals ar accomplished so far. Not paying for heat you might say.
I appreciate the words offered here but none of it works for me.
Later.
I will throw out one more long-shot possibility why you might be crashing when trying to use the stratum proxy... That support requires libevent - and if you compiled BFGMiner on a machine that does not have that library present, the support will not be built. I wouldn't expect it to crash, but it's possible. I am running it on a windows computer. I did not compile it I downloaded the binary. Just looked and it has libevent-2-0-5.dll included in that.
|
|
|
67
|
Bitcoin / Mining software (miners) / Re: BFGMiner 5.4.1: GBT+Stratum, RPC, Mac/Linux/Win64, Antminer S1-S5, Block v4 solo
|
on: December 01, 2015, 10:09:31 PM
|
Well I am just gonna do regular mining and declare mining solo with network gear as something only the bitcoin gods are capable of. I have months of research and work time trying to get this going and haven't ever managed it. Fortunately I run my miners in place of the baseboard heaters here so my goals ar accomplished so far. Not paying for heat you might say.
I appreciate the words offered here but none of it works for me.
Later.
I will throw out one more long-shot possibility why you might be crashing when trying to use the stratum proxy... That support requires libevent - and if you compiled BFGMiner on a machine that does not have that library present, the support will not be built. I wouldn't expect it to crash, but it's possible. I am running it on a windows computer. I did not compile it I downloaded the binary.
|
|
|
68
|
Bitcoin / Mining software (miners) / Re: BFGMiner 5.4.1: GBT+Stratum, RPC, Mac/Linux/Win64, Antminer S1-S5, Block v4 solo
|
on: December 01, 2015, 09:35:13 PM
|
Well I am just gonna do regular mining and declare mining solo with network gear as something only the bitcoin gods are capable of. I have months of research and work time trying to get this going and haven't ever managed it. Fortunately I run my miners in place of the baseboard heaters here so my goals ar accomplished so far. Not paying for heat you might say.
I appreciate the words offered here but none of it works for me.
Later.
|
|
|
69
|
Bitcoin / Mining software (miners) / Re: BFGMiner 5.4.1: GBT+Stratum, RPC, Mac/Linux/Win64, Antminer S1-S5, Block v4 solo
|
on: December 01, 2015, 09:22:23 PM
|
the S3 is set something like this to join the proxy ?. stratum+tcp://your miner ip :3333 port most be 3333 for the proxy for stratum+tcp to work right . other wise don't know . why not use a PI as the proxy they don't cost much and hell of a lot easier to set up as a proxy sever even with bfg . or get one of these for the wallets https://bitseed.org/product/pre-order-bitseed-v2/and xyzzy099 is right that's old school way for asicminer blades well the log thing didn't work but I did a conf write and it is as : { "pools" : [ { "url" : " http://127.0.0.1:12832", "user" : "clark", "pass" : "forfun64", "pool-priority" : "0" } ] , "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "120", "expiry-lp" : "3600", "failover-switch-delay" : "300", "log" : "20", "no-pool-disable" : true, "no-client-reconnect" : true, "no-show-processors" : true, "no-show-procs" : true, "no-unicode" : true, "queue" : "1", "quiet-work-updates" : true, "quiet-work-update" : true, "scan-time" : "60", "skip-security-checks" : "0", "submit-stale" : true, "temp-hysteresis" : "3", "shares" : 0, "kernel-path" : "C:\\Program Files\\BFGMiner\\/share/bfgminer", "http-port" : 8330 } If I change the port to 3333 it just crashes bfgminer and it happens fast enough I can't catch the error. I am not exactly a novice at mining and have done plenty of solo with gpu and usb stuff. This network device setup has me beaten. Just add '2>logfilename' to the end of the command line you start BFGMiner with. That will save the output to 'logfilename' so you can read it at your leisure.
|
|
|
70
|
Bitcoin / Mining software (miners) / Re: BFGMiner 5.4.1: GBT+Stratum, RPC, Mac/Linux/Win64, Antminer S1-S5, Block v4 solo
|
on: December 01, 2015, 08:47:04 PM
|
the S3 is set something like this to join the proxy ?. stratum+tcp://your miner ip :3333 port most be 3333 for the proxy for stratum+tcp to work right . other wise don't know . why not use a PI as the proxy they don't cost much and hell of a lot easier to set up as a proxy sever even with bfg . or get one of these for the wallets https://bitseed.org/product/pre-order-bitseed-v2/and xyzzy099 is right that's old school way for asicminer blades If I change the port to 3333 it just crashes bfgminer and it happens fast enough I can't catch the error. I am not exactly a novice at mining and have done plenty of solo with gpu and usb stuff. This network device setup has me beaten.
|
|
|
73
|
Bitcoin / Mining software (miners) / Re: BFGMiner 5.4.1: GBT+Stratum, RPC, Mac/Linux/Win64, Antminer S1-S5, Block v4 solo
|
on: December 01, 2015, 07:45:34 PM
|
Ok, thought I would try asking one more time before giving up.
I am trying to run bfgminer 5.4.1 as a proxy so I can solo mine to my wallets with some antminer S3 units. I can easily get it to connect to my wallet and I can get the miner to connect to the proxy, but all I get are HW errors.
bfgminer.bat = bfgminer --http-port 8330 -o 127.0.0.1:coin_rpc_port -u my_rpc_username -p my_rpc_pw
miner setup = ip of computer:8330 coin addy x
So can any one answer as to why this does not work?
The --http-port' switch is for old-school getwork mining h/w like asicminer blades. My guess is that your S3s are using stratum, not getwork. Maybe '--stratum-port' will work for you. I tried the stratum-port option and my miners won't connect on that.(--stratum-port 3330) I get the "SSM: no usable 2D work upstream
|
|
|
74
|
Bitcoin / Mining software (miners) / Re: BFGMiner 5.4.1: GBT+Stratum, RPC, Mac/Linux/Win64, Antminer S1-S5, Block v4 solo
|
on: December 01, 2015, 07:15:13 PM
|
Ok, thought I would try asking one more time before giving up.
I am trying to run bfgminer 5.4.1 as a proxy so I can solo mine to my wallets with some antminer S3 units. I can easily get it to connect to my wallet and I can get the miner to connect to the proxy, but all I get are HW errors.
bfgminer.bat = bfgminer --http-port 8330 -o 127.0.0.1:coin_rpc_port -u my_rpc_username -p my_rpc_pw
miner setup = ip of computer:8330 coin addy x
So can any one answer as to why this does not work?
|
|
|
76
|
Alternate cryptocurrencies / Pools (Altcoins) / Re: [POOL] Solo Mining - Many Coins Including The Big 3: Bitcoin Litecoin Zetacoin
|
on: December 01, 2015, 12:40:14 AM
|
So not understanding why I am not receiving the Joulecoin I mined out. I can go to the block exploreer and see the confirmations that they are good blocks and all. Whats up JLB419Hh7rMLsUgsDXFA1fWA3b13K42Z6U
Login to Control Panel
Approximate Speed: 0 H/s
Last 100 Blocks found by this miner:
1589990: 2015-11-29 23:04:22 GMT-5 | Pending 1589989: 2015-11-29 23:02:32 GMT-5 | Pending 1589986: 2015-11-29 22:58:26 GMT-5 | Pending 1589985: 2015-11-29 22:57:38 GMT-5 | Pending 1589984: 2015-11-29 22:54:09 GMT-5 | Pending 1589979: 2015-11-29 22:37:57 GMT-5 | Pending 1589974: 2015-11-29 22:30:08 GMT-5 | Pending 1589969: 2015-11-29 22:27:24 GMT-5 | Pending 1589965: 2015-11-29 22:25:24 GMT-5 | Pending 1589952: 2015-11-29 22:19:10 GMT-5 | Pending 1589937: 2015-11-29 22:11:40 GMT-5 | Pending 1589931: 2015-11-29 22:06:35 GMT-5 | Pending 1589926: 2015-11-29 22:02:45 GMT-5 | Pending 1589913: 2015-11-29 21:55:24 GMT-5 | Pending 1589907: 2015-11-29 21:53:27 GMT-5 | Pending 1589906: 2015-11-29 21:52:56 GMT-5 | Pending 1589905: 2015-11-29 21:51:19 GMT-5 | Pending 1589881: 2015-11-29 21:42:42 GMT-5 | Pending 1589875: 2015-11-29 21:41:49 GMT-5 | Pending 1589874: 2015-11-29 21:41:26 GMT-5 | Pending 1589853: 2015-11-29 21:35:11 GMT-5 | Pending 1589851: 2015-11-29 21:34:34 GMT-5 | Pending 1589848: 2015-11-29 21:33:43 GMT-5 | Pending 1589847: 2015-11-29 21:33:07 GMT-5 | Pending 1589840: 2015-11-29 21:31:07 GMT-5 | Pending 1589838: 2015-11-29 21:29:52 GMT-5 | Pending 1589837: 2015-11-29 21:29:12 GMT-5 | Pending 1589836: 2015-11-29 21:28:53 GMT-5 | Pending 1589834: 2015-11-29 21:23:58 GMT-5 | Pending 1589832: 2015-11-29 21:20:55 GMT-5 | Pending 1589830: 2015-11-29 21:19:44 GMT-5 | Pending 1589827: 2015-11-29 21:16:29 GMT-5 | Pending 1589822: 2015-11-29 21:15:02 GMT-5 | Pending 1589821: 2015-11-29 21:14:28 GMT-5 | Pending 1589819: 2015-11-29 21:13:26 GMT-5 | Pending 1589816: 2015-11-29 21:11:49 GMT-5 | Pending 1589814: 2015-11-29 21:10:57 GMT-5 | Pending 1589812: 2015-11-29 21:09:06 GMT-5 | Pending 1589810: 2015-11-29 21:07:16 GMT-5 | Pending 1589809: 2015-11-29 21:06:40 GMT-5 | Pending 1589804: 2015-11-29 21:01:32 GMT-5 | Pending 1589803: 2015-11-29 21:01:08 GMT-5 | Pending 1589796: 2015-11-29 20:54:16 GMT-5 | Pending 1589792: 2015-11-29 20:52:01 GMT-5 | Pending 1589791: 2015-11-29 20:51:29 GMT-5 | Pending 1589788: 2015-11-29 20:49:42 GMT-5 | Pending 1589787: 2015-11-29 20:49:22 GMT-5 | Pending 1589787: 2015-11-29 20:49:21 GMT-5 | Pending 1589787: 2015-11-29 20:49:19 GMT-5 | Pending 1589787: 2015-11-29 20:49:17 GMT-5 | Pending 1589786: 2015-11-29 20:48:44 GMT-5 | Pending 1589785: 2015-11-29 20:48:00 GMT-5 | Pending 1589783: 2015-11-29 20:45:49 GMT-5 | Pending 1589782: 2015-11-29 20:45:14 GMT-5 | Pending 1589779: 2015-11-29 20:44:07 GMT-5 | Pending 1589777: 2015-11-29 20:43:44 GMT-5 | Pending 1589770: 2015-11-29 20:36:32 GMT-5 | Pending 1589768: 2015-11-29 20:34:24 GMT-5 | Pending 1589767: 2015-11-29 20:33:45 GMT-5 | Pending 1589766: 2015-11-29 20:32:03 GMT-5 | Pending 1589763: 2015-11-29 20:29:08 GMT-5 | Pending 1589761: 2015-11-29 20:28:19 GMT-5 | Pending 1589758: 2015-11-29 20:24:55 GMT-5 | Pending 1589752: 2015-11-29 20:18:06 GMT-5 | Pending 1589749: 2015-11-29 20:17:16 GMT-5 | Pending 1589747: 2015-11-29 20:15:56 GMT-5 | Pending 1589743: 2015-11-29 20:13:43 GMT-5 | Pending 1589740: 2015-11-29 20:12:28 GMT-5 | Pending 1589739: 2015-11-29 20:11:34 GMT-5 | Pending 1589734: 2015-11-29 20:09:12 GMT-5 | Pending 1589730: 2015-11-29 20:06:16 GMT-5 | Pending 1589719: 2015-11-29 20:01:27 GMT-5 | Pending 1589717: 2015-11-29 20:00:17 GMT-5 | Pending 1589716: 2015-11-29 19:58:37 GMT-5 | Pending 1589712: 2015-11-29 19:56:41 GMT-5 | Pending 1589702: 2015-11-29 19:54:12 GMT-5 | Pending 1589699: 2015-11-29 19:52:25 GMT-5 | Pending 1589695: 2015-11-29 19:49:51 GMT-5 | Pending 1589693: 2015-11-29 19:46:16 GMT-5 | Pending 1589692: 2015-11-29 19:45:49 GMT-5 | Pending 1589690: 2015-11-29 19:43:52 GMT-5 | Pending 1589687: 2015-11-29 19:40:24 GMT-5 | Pending 1589678: 2015-11-29 19:37:42 GMT-5 | Pending 1589677: 2015-11-29 19:36:33 GMT-5 | Pending 1589676: 2015-11-29 19:35:57 GMT-5 | Pending 1589672: 2015-11-29 19:33:45 GMT-5 | Pending 1589668: 2015-11-29 19:29:34 GMT-5 | Pending 1589665: 2015-11-29 19:26:35 GMT-5 | Pending 1589664: 2015-11-29 19:26:11 GMT-5 | Pending 1589659: 2015-11-29 19:22:26 GMT-5 | Pending 1589645: 2015-11-29 19:19:12 GMT-5 | Pending 1589638: 2015-11-29 19:18:04 GMT-5 | Pending 1589635: 2015-11-29 19:17:27 GMT-5 | Pending 1589634: 2015-11-29 19:16:23 GMT-5 | Pending 1589633: 2015-11-29 19:15:55 GMT-5 | Pending 1589632: 2015-11-29 19:14:51 GMT-5 | Pending 1589631: 2015-11-29 19:14:21 GMT-5 | Pending 1589631: 2015-11-29 19:14:20 GMT-5 | Pending 1589630: 2015-11-29 19:13:04 GMT-5 | Pending 1589629: 2015-11-29 19:12:26 GMT-5 | Pending
These are just what is still showing and there are more than a few that don't show anymore. Please release my coins.
|
|
|
79
|
Bitcoin / Hardware / Re: S1 antminer help.
|
on: November 30, 2015, 08:29:44 AM
|
If your any good at soldering little resistors you can just parrallel in some at the pencil mod location to get the desired affect in a reliable fashion. Once the resistance is modded it is just a matter of changing the freq via ssh
|
|
|
80
|
Bitcoin / Hardware / Re: ANTMINER U3 Discussion and Support Thread
|
on: August 07, 2015, 06:13:18 AM
|
Wasn't aware I could do that. Still learning the forums thing. There are a few posts missing on the u3 subject, but that one is good enough. bat line structure is important on the things. Thanks for the know how on the history thing.
|
|
|
|