Does anybody know what causes this problem? The miner starts normal, after 1 minute, the FANS of the GPU jumps to max. Then couple seconds later i get showered with the same error codes NVML: cannot get current temperature, error 15 When i plug the GPU's in another working miner, the GPU's work fine. I think it could be PSU or MOBO related then  |
|
|
|
|
UPDATE
So i've installed the GPU's 2 by the time on a different WORKING mining rig.
And all the GPU's run normally.
So this is prbably a motherboard issue or a CPU issue ?
|
|
|
|
|
I've enabled 4g decoding in BIOS
I've tried GEN1 - GEN2 - AUTO etc.... In the H11 D3A MOBO manual it says Enable "Gen 2" with latest bios.
I'm using default clocks, MSI AB isn't even installed yet.
I've contacted my supplier of the rigs, and they said
ERROR 15 temperature and fan are ususally caused by a defected riser.
But i've tested each GPU seperately, in different slots.
And i'm getting, error 15 and sometimes its not detected CUDA device. Even tho its listed in Device manager.
So its weird, i would have 6 faulty risers out of 6 gpu's.
So maybe one faulty riser, damaged the others in some way and now they are all damaged i guess....
|
|
|
|
Windows 10 Pro, Drivers 382.43 6 x p106-100 cards. H110 D3A mobo 8 GB ram Any advice, been stuck for a couple days now. 13:28:14:226 1a70 Check and remove old log files...
13:28:14:238 1a70 args: -epsw x -mode 1 -ftime 10 -mport 3333 -esm 1 -r 1 -ewal 0x8daa535fc97819f1bf6401008af043d2c8ace2a5
13:28:14:252 1a70
13:28:14:269 1a70 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
13:28:14:283 1a70 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 º
13:28:14:289 1a70 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
13:28:14:296 1a70
13:28:14:503 1a70 ETH: 2 pools are specified
13:28:14:531 1a70 Main Ethereum pool is eu1.ethermine.org:4444
13:28:15:278 1a70 OpenCL platform: Intel(R) OpenCL
13:28:15:285 1a70 OpenCL platform: NVIDIA CUDA
13:28:15:292 1a70 AMD OpenCL platform not found
13:28:15:783 1a70 CUDA initializing...
13:28:15:788 1a70 NVIDIA Cards available: 3
13:28:15:793 1a70 CUDA Driver Version/Runtime Version: 9.1/8.0
13:28:15:803 1a70 GPU #0: P106-100, 6071 MB available, 10 compute units, capability: 6.1
13:28:15:809 1a70 GPU #1: P106-100, 6071 MB available, 10 compute units, capability: 6.1
13:28:15:817 1a70 GPU #2: P106-100, 6071 MB available, 10 compute units, capability: 6.1
13:28:15:833 1a70 Total cards: 3
13:28:19:848 1a70 No AMD cards in the list, ADL library will not be used.
13:28:19:912 1a70 NVML version: 9.388.43
13:28:20:321 18d8 ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.239.100> port 4444
13:28:20:349 18d8 send: {"id":2,"jsonrpc":"2.0","method":"eth_login","params":["0x8daa535fc97819f1bf6401008af043d2c8ace2a5","x"]}
13:28:20:354 18d8 ETH: Stratum - Connected (eu1.ethermine.org:4444)
13:28:20:370 18d8 got 39 bytes
13:28:20:374 18d8 buf: {"id":2,"jsonrpc":"2.0","result":true}
13:28:20:378 18d8 parse packet: 38
13:28:20:382 18d8 ETH: Authorized
13:28:20:393 18d8 send: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
13:28:20:398 18d8 new buf size: 0
13:28:20:405 1a70 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
13:28:20:410 1a70 ETH: qtminer stratum mode
13:28:20:415 18d8 got 248 bytes
13:28:20:421 18d8 buf: {"id":3,"jsonrpc":"2.0","result":["0xc8e89f37cbdc358f313fa6d584a0986c815425aaccddebfa432d233264f516c7","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4767f6"]}
13:28:20:426 18d8 parse packet: 247
13:28:20:430 18d8 ETH: job changed
13:28:20:434 18d8 new buf size: 0
13:28:20:430 1a70 Watchdog enabled
13:28:20:445 1a70 Remote management is enabled on port 3333
13:28:20:454 1a70
13:28:20:503 17bc Setting DAG epoch #155...
13:28:22:769 189c Setting DAG epoch #155 for GPU1
13:28:22:775 17c8 Setting DAG epoch #155 for GPU0
13:28:22:775 189c Create GPU buffer for GPU1
13:28:22:769 17bc Setting DAG epoch #155 for GPU2
13:28:22:781 17c8 Create GPU buffer for GPU0
13:28:22:792 17bc Create GPU buffer for GPU2
13:28:31:907 189c GPU1 DAG creation time - 8936 ms
13:28:31:922 189c Setting DAG epoch #155 for GPU1 done
13:28:31:948 17bc GPU2 DAG creation time - 8941 ms
13:28:31:960 17bc Setting DAG epoch #155 for GPU2 done
13:28:31:960 17c8 GPU0 DAG creation time - 8952 ms
13:28:31:987 17c8 Setting DAG epoch #155 for GPU0 done
13:28:40:365 18d8 got 248 bytes
13:28:40:386 18d8 buf: {"id":0,"jsonrpc":"2.0","result":["0x7a4c452aa2855df87062f3140f54969193dfb1f1bfc783b2baa615316629fbd2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4767f7"]}
13:28:40:399 18d8 parse packet: 247
13:28:40:411 18d8 ETH: job changed
13:28:40:419 18d8 new buf size: 0
13:28:40:428 18d8 ETH: 12/05/17-13:28:40 - New job from eu1.ethermine.org:4444
13:28:40:436 18d8 target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
13:28:40:445 18d8 ETH - Total Speed: 62.838 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
13:28:40:454 18d8 ETH: GPU0 20.932 Mh/s, GPU1 20.941 Mh/s, GPU2 20.965 Mh/s
13:28:40:460 18d8 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x3bed3a9", "0x00000000000000000000000000000000000000000000000000000000719b7ce1"]}
13:28:40:493 18d8 got 39 bytes
13:28:40:497 18d8 buf: {"id":6,"jsonrpc":"2.0","result":true}
13:28:40:501 18d8 parse packet: 38
13:28:40:505 18d8 new buf size: 0
13:28:44:577 1a6c GPU0 t=46C fan=48%, GPU1 t=46C fan=48%, GPU2 t=42C fan=48%
13:28:44:649 18ec em hbt: 0, fm hbt: 16,
13:28:44:655 18ec watchdog - thread 0 (gpu0), hb time 125
13:28:44:661 18ec watchdog - thread 1 (gpu0), hb time 0
13:28:44:667 18ec watchdog - thread 2 (gpu1), hb time 62
13:28:44:673 18ec watchdog - thread 3 (gpu1), hb time 187
13:28:44:677 18ec watchdog - thread 4 (gpu2), hb time 156
13:28:44:681 18ec watchdog - thread 5 (gpu2), hb time 31
13:28:50:447 18d8 ETH: checking pool connection...
13:28:50:460 18d8 send: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
13:28:50:484 18d8 got 248 bytes
13:28:50:492 18d8 buf: {"id":3,"jsonrpc":"2.0","result":["0x7a4c452aa2855df87062f3140f54969193dfb1f1bfc783b2baa615316629fbd2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4767f7"]}
13:28:50:497 18d8 parse packet: 247
13:28:50:503 18d8 ETH: job is the same
13:28:50:508 18d8 new buf size: 0
13:29:00:464 18d8 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x3bebec2", "0x00000000000000000000000000000000000000000000000000000000719b7ce1"]}
13:29:00:493 18d8 got 39 bytes
13:29:00:502 18d8 buf: {"id":6,"jsonrpc":"2.0","result":true}
13:29:00:512 18d8 parse packet: 38
13:29:00:517 18d8 new buf size: 0
13:29:06:242 18d8 got 248 bytes
13:29:06:260 18d8 buf: {"id":0,"jsonrpc":"2.0","result":["0x1279750756acbe6b6de83e7fe6f2e97eb4f8073c5562f4f5ca244a40719dc324","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4767f8"]}
13:29:06:274 18d8 parse packet: 247
13:29:06:281 18d8 ETH: job changed
13:29:06:287 18d8 new buf size: 0
13:29:06:295 18d8 ETH: 12/05/17-13:29:06 - New job from eu1.ethermine.org:4444
13:29:06:302 18d8 target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
13:29:06:306 18d8 ETH - Total Speed: 62.775 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
13:29:06:312 18d8 ETH: GPU0 20.940 Mh/s, GPU1 20.901 Mh/s, GPU2 20.935 Mh/s
13:29:09:907 1a6c NVML: cannot get current temperature, error 15
13:29:09:912 1a6c NVML: cannot get fan speed, error 15
13:29:09:916 1a6c NVML: cannot get current temperature, error 15
13:29:09:921 1a6c NVML: cannot get fan speed, error 15
13:29:09:926 1a6c NVML: cannot get current temperature, error 15
13:29:09:930 1a6c NVML: cannot get fan speed, error 15
13:29:12:939 1a6c NVML: cannot get current temperature, error 15
13:29:12:957 1a6c NVML: cannot get fan speed, error 15
13:29:12:967 1a6c NVML: cannot get current temperature, error 15
13:29:12:978 1a6c NVML: cannot get fan speed, error 15
13:29:12:990 1a6c NVML: cannot get current temperature, error 15
13:29:12:997 1a6c NVML: cannot get fan speed, error 15
13:29:16:003 1a6c NVML: cannot get current temperature, error 15
13:29:16:018 1a6c NVML: cannot get fan speed, error 15
13:29:16:020 1a6c NVML: cannot get current temperature, error 15
13:29:16:030 1a6c NVML: cannot get fan speed, error 15
13:29:16:042 1a6c NVML: cannot get current temperature, error 15
13:29:16:054 1a6c NVML: cannot get fan speed, error 15
13:29:16:062 1a6c NVML: cannot get current temperature, error 15
13:29:16:068 1a6c NVML: cannot get fan speed, error 15
13:29:16:074 1a6c NVML: cannot get current temperature, error 15
13:29:16:079 1a6c NVML: cannot get fan speed, error 15
13:29:16:086 1a6c NVML: cannot get current temperature, error 15
13:29:16:093 1a6c NVML: cannot get fan speed, error 15
13:29:16:099 1a6c GPU0 t=0C fan=0%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%
13:29:18:018 18ec em hbt: 0, fm hbt: 94,
13:29:18:031 18ec watchdog - thread 0 (gpu0), hb time 11688
13:29:18:043 18ec watchdog - thread 1 (gpu0), hb time 11578
13:29:18:056 18ec watchdog - thread 2 (gpu1), hb time 11609
13:29:18:065 18ec watchdog - thread 3 (gpu1), hb time 11750
13:29:18:066 18ec watchdog - thread 4 (gpu2), hb time 11734
13:29:18:072 18ec watchdog - thread 5 (gpu2), hb time 11625
13:29:19:108 1a6c NVML: cannot get current temperature, error 15
13:29:19:118 1a6c NVML: cannot get fan speed, error 15
13:29:19:126 1a6c NVML: cannot get current temperature, error 15
13:29:19:133 1a6c NVML: cannot get fan speed, error 15
13:29:19:142 1a6c NVML: cannot get current temperature, error 15
13:29:19:149 1a6c NVML: cannot get fan speed, error 15
13:29:20:479 18d8 ETH: checking pool connection...
13:29:20:492 18d8 send: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
13:29:20:501 18d8 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x00000000000000000000000000000000000000000000000000000000719b7ce1"]}
13:29:20:515 18d8 got 248 bytes
13:29:20:524 18d8 buf: {"id":3,"jsonrpc":"2.0","result":["0x1279750756acbe6b6de83e7fe6f2e97eb4f8073c5562f4f5ca244a40719dc324","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4767f8"]}
13:29:20:532 18d8 parse packet: 247
13:29:20:541 18d8 ETH: job is the same
13:29:20:550 18d8 new buf size: 0
13:29:20:558 18d8 got 39 bytes
13:29:20:563 18d8 buf: {"id":6,"jsonrpc":"2.0","result":true}
13:29:20:569 18d8 parse packet: 38
13:29:20:574 18d8 new buf size: 0
13:29:20:973 10dc NVML: cannot get current temperature, error 15
13:29:20:986 10dc NVML: cannot get fan speed, error 15
13:29:21:000 10dc NVML: cannot get current temperature, error 15
13:29:21:009 10dc NVML: cannot get fan speed, error 15
13:29:21:018 10dc NVML: cannot get current temperature, error 15
13:29:21:028 10dc NVML: cannot get fan speed, error 15
|
|
|
|
12:52:54:235 1de8 Check and remove old log files...
12:52:54:254 1de8 args: -epool eu1.ethermine.org:4444 -epsw x -ewal 0x8daa535fc97819f1bf6401008af043d2c8ace2a5
12:52:54:260 1de8
12:52:54:264 1de8 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:52:54:268 1de8 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 º
12:52:54:273 1de8 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
12:52:54:277 1de8
12:52:54:500 1de8 ETH: 3 pools are specified
12:52:54:505 1de8 Main Ethereum pool is eu1.ethermine.org:4444
12:52:54:509 1de8 DCR: 0 pool is specified
12:52:55:951 1de8 OpenCL platform: Intel(R) OpenCL
12:52:55:955 1de8 OpenCL platform: NVIDIA CUDA
12:52:55:959 1de8 AMD OpenCL platform not found
12:52:56:824 1de8 CUDA initializing...
12:52:56:829 1de8 NVIDIA Cards available: 4
12:52:56:833 1de8 CUDA Driver Version/Runtime Version: 9.1/8.0
12:52:56:846 1de8 GPU #0: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:853 1de8 GPU #1: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:864 1de8 GPU #2: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:874 1de8 GPU #3: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:879 1de8 Total cards: 4
12:52:59:691 1de8 No AMD cards in the list, ADL library will not be used.
12:52:59:821 1de8 NVML version: 9.388.43
12:53:00:369 1f2c ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.239.100> port 4444
12:53:00:397 1f2c send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x8daa535fc97819f1bf6401008af043d2c8ace2a5", "x"], "id": 2, "method": "eth_submitLogin"}
12:53:00:403 1f2c ETH: Stratum - Connected (eu1.ethermine.org:4444)
12:53:00:420 1f2c got 39 bytes
12:53:00:425 1f2c buf: {"id":2,"jsonrpc":"2.0","result":true}
12:53:00:431 1de8 No pool specified for Decred! Ethereum-only mining mode is enabled
12:53:00:430 1f2c parse packet: 38
12:53:00:442 1f2c ETH: Authorized
12:53:00:446 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:00:451 1f2c new buf size: 0
12:53:00:455 1de8 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
12:53:00:460 1de8 ETH: eth-proxy stratum mode
12:53:00:469 1de8 Watchdog enabled
12:53:00:477 1f2c got 248 bytes
12:53:00:477 1de8 Remote management (READ-ONLY MODE) is enabled on port 3333
12:53:00:482 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0x4839112f7d1ebca13fbc90f1cc70441e1b95d35a818dd27a7827b062d20a9324","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677b"]}
12:53:00:496 1f2c parse packet: 247
12:53:00:511 1f2c ETH: job changed
12:53:00:516 1f2c new buf size: 0
12:53:00:488 1de8
12:53:00:535 1c04 Setting DAG epoch #155...
12:53:02:832 1e2c Setting DAG epoch #155 for GPU2
12:53:02:832 1c04 Setting DAG epoch #155 for GPU0
12:53:02:842 1cac Setting DAG epoch #155 for GPU1
12:53:02:842 1c04 Create GPU buffer for GPU0
12:53:02:837 1e2c Create GPU buffer for GPU2
12:53:02:847 1cac Create GPU buffer for GPU1
12:53:02:863 1de0 Setting DAG epoch #155 for GPU3
12:53:02:879 1de0 Create GPU buffer for GPU3
12:53:05:707 1f2c got 248 bytes
12:53:05:711 1f2c buf: {"id":0,"jsonrpc":"2.0","result":["0xb71a70377acf1007b2fe7561c7767f3b0bc475edb66edc09921c578f221e7ec0","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677c"]}
12:53:05:715 1f2c parse packet: 247
12:53:05:721 1f2c ETH: job changed
12:53:05:725 1f2c new buf size: 0
12:53:05:730 1f2c ETH: 12/05/17-12:53:05 - New job from eu1.ethermine.org:4444
12:53:05:734 1f2c target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
12:53:05:739 1f2c ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
12:53:05:744 1f2c ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
12:53:10:527 1f2c ETH: checking pool connection...
12:53:10:531 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:10:551 1f2c got 248 bytes
12:53:10:555 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0xb71a70377acf1007b2fe7561c7767f3b0bc475edb66edc09921c578f221e7ec0","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677c"]}
12:53:10:559 1f2c parse packet: 247
12:53:10:564 1f2c ETH: job is the same
12:53:10:568 1f2c new buf size: 0
12:53:12:036 1cac GPU1 DAG creation time - 8855 ms
12:53:12:042 1de0 GPU3 DAG creation time - 8863 ms
12:53:12:035 1e2c GPU2 DAG creation time - 8851 ms
12:53:12:066 1de0 Setting DAG epoch #155 for GPU3 done
12:53:12:042 1cac Setting DAG epoch #155 for GPU1 done
12:53:12:057 1c04 GPU0 DAG creation time - 8993 ms
12:53:12:066 1e2c Setting DAG epoch #155 for GPU2 done
12:53:12:088 1c04 Setting DAG epoch #155 for GPU0 done
12:53:12:554 1f2c got 248 bytes
12:53:12:558 1f2c buf: {"id":0,"jsonrpc":"2.0","result":["0xaec53ead85885c1b966edb07f75319dc58e026b8a13beef72cf62c1989122aaf","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:12:562 1f2c parse packet: 247
12:53:12:567 1f2c ETH: job changed
12:53:12:571 1f2c new buf size: 0
12:53:12:576 1f2c ETH: 12/05/17-12:53:12 - New job from eu1.ethermine.org:4444
12:53:12:581 1f2c target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
12:53:12:586 1f2c ETH - Total Speed: 83.925 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
12:53:12:592 1f2c ETH: GPU0 20.983 Mh/s, GPU1 20.986 Mh/s, GPU2 20.969 Mh/s, GPU3 20.987 Mh/s
12:53:16:387 1f2c got 248 bytes
12:53:16:391 1f2c buf: {"id":0,"jsonrpc":"2.0","result":["0xb4e920856d47c6c7c84bbf733188db79b12f088b12d784c35ad271966ab23cc2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:16:395 1f2c parse packet: 247
12:53:16:400 1f2c ETH: job changed
12:53:16:404 1f2c new buf size: 0
12:53:16:408 1f2c ETH: 12/05/17-12:53:16 - New job from eu1.ethermine.org:4444
12:53:16:414 1f2c target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
12:53:16:420 1f2c ETH - Total Speed: 83.907 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
12:53:16:425 1f2c ETH: GPU0 20.983 Mh/s, GPU1 20.976 Mh/s, GPU2 20.973 Mh/s, GPU3 20.975 Mh/s
12:53:20:527 1f2c send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x4ff2499", "0x00000000000000000000000000000000000000000000000000000000e9c85e62"]}
12:53:20:541 1f2c ETH: checking pool connection...
12:53:20:545 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:20:551 1f2c got 39 bytes
12:53:20:555 1f2c buf: {"id":6,"jsonrpc":"2.0","result":true}
12:53:20:559 1f2c parse packet: 38
12:53:20:564 1f2c new buf size: 0
12:53:20:570 1f2c got 248 bytes
12:53:20:574 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0xb4e920856d47c6c7c84bbf733188db79b12f088b12d784c35ad271966ab23cc2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:20:579 1f2c parse packet: 247
12:53:20:583 1f2c ETH: job is the same
12:53:20:587 1f2c new buf size: 0
12:53:24:534 11d0 GPU0 t=44C fan=48%, GPU1 t=45C fan=48%, GPU2 t=42C fan=48%, GPU3 t=45C fan=48%
12:53:24:609 11cc em hbt: 0, fm hbt: 94,
12:53:24:613 11cc watchdog - thread 0 (gpu0), hb time 125
12:53:24:617 11cc watchdog - thread 1 (gpu0), hb time 0
12:53:24:622 11cc watchdog - thread 2 (gpu1), hb time 171
12:53:24:626 11cc watchdog - thread 3 (gpu1), hb time 46
12:53:24:630 11cc watchdog - thread 4 (gpu2), hb time 15
12:53:24:635 11cc watchdog - thread 5 (gpu2), hb time 140
12:53:24:639 11cc watchdog - thread 6 (gpu3), hb time 187
12:53:24:643 11cc watchdog - thread 7 (gpu3), hb time 62
12:53:28:896 11d0 NVML: cannot get current temperature, error 15
12:53:28:906 11d0 NVML: cannot get fan speed, error 15
12:53:28:914 11d0 NVML: cannot get current temperature, error 15
12:53:28:919 11d0 NVML: cannot get fan speed, error 15
12:53:28:925 11d0 NVML: cannot get current temperature, error 15
12:53:28:930 11d0 NVML: cannot get fan speed, error 15
12:53:30:557 1f2c ETH: checking pool connection...
12:53:30:561 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:30:581 1f2c got 248 bytes
12:53:30:585 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0xb4e920856d47c6c7c84bbf733188db79b12f088b12d784c35ad271966ab23cc2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:30:590 1f2c parse packet: 247
12:53:30:594 1f2c ETH: job is the same
12:53:30:598 1f2c new buf size: 0
12:53:31:936 11d0 NVML: cannot get current temperature, error 15
12:53:31:942 11d0 NVML: cannot get fan speed, error 15
12:53:31:947 11d0 NVML: cannot get current temperature, error 15
12:53:31:952 11d0 NVML: cannot get fan speed, error 15
12:53:31:958 11d0 NVML: cannot get current temperature, error 15
12:53:31:964 11d0 NVML: cannot get fan speed, error 15
12:53:34:971 11d0 NVML: cannot get current temperature, error 15
12:53:34:978 11d0 NVML: cannot get fan speed, error 15
12:53:34:985 11d0 NVML: cannot get current temperature, error 15
12:53:34:991 11d0 NVML: cannot get fan speed, error 15
12:53:34:996 11d0 NVML: cannot get current temperature, error 15
12:53:35:002 11d0 NVML: cannot get fan speed, error 15
12:53:35:484 1b68 NVML: cannot get current temperature, error 15
12:53:35:489 1b68 NVML: cannot get fan speed, error 15
12:53:35:493 1b68 NVML: cannot get current temperature, error 15
12:53:35:498 1b68 NVML: cannot get fan speed, error 15
12:53:35:503 1b68 NVML: cannot get current temperature, error 15
12:53:35:507 1b68 NVML: cannot get fan speed, error 15
|
|
|
|
|
Bios GEN is set to GEN2
I managed to run 3 GPU's, in slot GPU0 1 AND 2.
Whenever i attach another GPU, i'm getting ERROR 15, temperature and fan errors. And the fans start going at 100%
I've tried another PCI slot and same thing happened.
|
|
|
|
|
Enabled 4G decoding in bios ?
|
|
|
|
|
So i added one GPU at a time, and everything worked till i got to GPU4
Got blue screened again, and the second time i tried claymore. Computer just shut down rapidly. And restarted.
Any advice guys ? Could this be a faulty riser ?
|
|
|
|
|
I swapped out some usb's and, and changed some between them.
Now OS is recognizing all six.
But i'm getting Temperature and fan errors
23:40:27:679 1ff4 NVML: cannot get fan speed, error 15
23:40:27:679 1ff4 NVML: cannot get current temperature, error 15
23:40:27:679 1ff4 NVML: cannot get fan speed, error 15
23:40:27:694 1ff4 NVML: cannot get current temperature, error 15
23:40:27:694 1ff4 NVML: cannot get fan speed, error 15
I'm getting blue screened aswell. 10 seconds after starting miner. Thread exception not handled
When i try to use dstm miner (equihash) my computer just quits and restart.
|
|
|
|
|
Tried that already, GPU's are showned in hidden devices tho in device manager.
I'm getting only 2 gpu's detected now, so i'm starting to think this is a hardware error probably?
Bad riser of USB cable ?
|
|
|
|
|
I've managed to get 5 detected at the moment.
|
|
|
|
|
I just did a clean UEFI Windows 10 Pro install.
But my motherboard H110-D3A is only detecting 3 GPU's. I have 5 other rigs working just fine on the same MOBO.
I don't know what i forgot to change in BIOS, or something else i'm missing ....
I'm confused.....
4G decoding is Enabled, i have the latest BIOS.
Any suggestions ?
Thanks
|
|
|
|
|
Its all in the title any advice ?
|
|
|
|
|
I've been able to make it work on another pool.
But is it normal the hashrate jumps around like that?
I'm getting
144 then back to 136 then back to 141 etc etc...
?
|
|
|
|
The minute i launch ethminer 0.11.0 i'm getting ethminer stopped working error. Windows 10 6 x P106-100 NVIDIA driver 382.53 set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
ethminer -U -S eth.suprnova.cc:5000 -O Pr0ph3t.eth1 --cuda-parallel-hash 4
Whenever i launch i'm getting this error. http://prntscr.com/hhntsh |
|
|
|
|
On one miner i'm see seeing on telemetry Page.
Uptime over 6 hours. And con time only 30 minutes.
Miner is mining and everything looks good. But i have a very small share rate.
What's causing this con time error ? The last six hours Ive been basicly mining only 30 minutes ?
|
|
|
|
|
I'm having issues with memory errors after 6 hours, is there a restart script i can use in my .bat ?
|
|
|
|
|
Is this for monitoring your rigs ?
How does that work, if you use the telemetry option with your ip ?
Do you use an app on your phone or a website ?
|
|
|
|
|
3x 6x1060
So thats 18 cards.
Each miner (6 cards) runs @550w - 1840-1850h/s. With EWFB i got 1720-1730
So per miner i'm getting +100 sols. So for the 3 miners i'm actually getting +300 sols more.
So basiclly i'm running EWFB miner with 19 cards instead of 18
|
|
|
|
|
Show Posts
