If I'm allowed... I have a somehow stupid question, but... But since I have old psu's, why can't I use one of these:  |
|
|
|
it looks like it will take 1-2 days to clear all questions between yxt and me (pricing, shipping, warranty etc.). After that i will post the new price for orders in the topic/startpost.
Also i will then write PMs to all buyers about the Bonus-programm (cheaper sticks for 0.2 ? 0.3? BTC)
For shipping outside germany i will calculate new prices incl. premium-shipping by dhl for faster delivery.
best regards
Menig
Great news!!! Can't wait for the PM!! Thank you! |
|
|
|
everyone says that individual sticks will cost 0.69, but I thought the purpose of a group buy is to lower the price for smaller orders...
I really hope the price for small orders will be a few bitcents lower than 0.69 BTC...
And it is. If you buy 5, you get 0.6 for each. :-D What I wonder is for how much can I get two, since I've already bought a pair of these. Some say 0.4/each, other say 0.1, etc, and I'd loved to know exact numbers. |
|
|
|
|
Yes, please confirm us the price so I can place an order!
Thank you!
|
|
|
|
HURRA; DIE NEUIGKEITEN SIND DA:
Ich habe YXT erreicht bzw. er hat meine Email beantwortet. Es kommen neue Preis für unseren GB, und für jeden Stick den wir für 1.04 bestellt haben besteht die Möglichkeit Sticks zu einem zusätzlich reduzierten Preis zu bestellen.
(z.B. falls 10 Sticks für 1.04 gekauft wurden , und der neue GB-Preis 0.6 BTC sein sollten, können 10 Sticks für z.B. 0,4 BTC gekauft werden).,
GREAT NEWS:
YXT ANSWERED MY EMAILS:
NEW PRICES FOR STICKS COMING TOMORROW, ALSO THERE WILL BE A CHEAPER PRICE FOR EACH STICK YOU BUYED AT 1.04 WHICH WILL REDUCE THE PRICE FOR A NEW STICK
(for example: if you buyed 10 Sticks for 1.04, and the new price would be 0.6 BTC, you can buy 10 Sticks for... maybe 0.4BTC) .
Great news!!! Thank you!! Since I've bought 2, what price could i get another two? The rest would be in the normal price, of course. |
|
|
|
That still doesn't answer my question. Playing with the numbers or not, you asked my why 2BTC and I've answered it was a ceiling. I asked you how much would you pay for, and you point me to a mining calculator. Would you please answer how much would you pay for, then? |
|
|
|
|
Menig, as soon as you have the answer from yxt, please let us know in English also.
I might be interested in some more from 2 to 6, at least.
|
|
|
|
Would we benefit from the 0.1BTC/unit for those who bought earlier? If so, I'd be eligible for 2 units @ 0.2BTC plus shipping!  |
|
|
|
I'd buy for about 2BTC at current price.
May I ask why 2 BTC? You will most likely not get those back What price would you propose, then? Less than this, I'd be definitively interested. 2BTC would be the ceiling. |
|
|
|
|
I'd buy for about 2BTC at current price.
Don't forget that the Jalapeño was initially for $145 for 4.5Gh/s.
|
|
|
|
Oh boy... I missed an Y on that picture... shame... |
|
|
|
 Thank you Menig!!! (please, note the trust increase! :p ) |
|
|
|
Arrived! Yes it is my first time in Portugal. It's beautiful!
Welcome!! |
|
|
|
WOOWW... Drolling all over my keyboard... |
|
|
|
INFO: Ich habe soeben von YXT die Info bekommen das er HEUTE weitere 420 Sticks an mich versendet, damit bin ich bei insgesamt 840 Sticks und ALLE Bestellungen werden also
zu 100% verschickt bevor ich ein paar Tage nicht zu Hause bin 
Gruß MenigGreat!!!! (Unless I've got lost in translation :p) |
|
|
|
Sorry ppl, perhaps a stupid question or the wrong place to put it, but I couldn't find the answer anywhere in my searches:
Can anyone provide me the physical dimensions of the USB ASIC Erupters?
I need the heat sink dimensions and the length from the end of the heat sink to the start of the usb, if you'd be kind.
Thank you all!
If it'll make you any less depressed...  Because the width of the USB connector is standardised, I can easily work it out by counting pixels. I measured the width of some standard USB connectors around my place with calipers and they were all 12.00 +/- 0.02 mm From your supplied image, 90 pixels = 12.00 mm, thus 7.5 pixels per mm Also from your pic: X = 449 px = 60.0 mm Y = 188 px = 25.1 mm Z = 299 px = 39.9 mm I have measured leniently the dimensions, they may be about +/- 0.1 mm, favoring the larger for your convenience so that it fits wherever you plan it to. And, Heatsink width: 25 mm Heatsink length: 40 mm Heatsink thickness: ~2.2 mm From end of heatsink to end of USB: 20.2 mm Trillium, I'd say you're my salvation, even if there is no way to save the earth. The Vogons will destroy it anyway, in every single dimension... Thank you a lot!! |
|
|
|
|
Sorry ppl, perhaps a stupid question or the wrong place to put it, but I couldn't find the answer anywhere in my searches:
Can anyone provide me the physical dimensions of the USB ASIC Erupters?
I need the heat sink dimensions and the length from the end of the heat sink to the start of the usb, if you'd be kind.
Thank you all!
|
|
|
|
I really hope you receive them tomorrow  Than I'll receive my erupter on friday You lucky!!!! :p I'll have to wait for the next batch of more 377 of these...  |
|
|
|
Thank you philips! Those were the missing links! |
|
|
|
|
Show Posts
