|
So minion Saga.
We got chips and only a few customers paid with cash/bitcoin for service. One got refund rest got boards.
2 bigger orders get partial delivery and the remaining boards are lost and we are waiting for insurance claim to be paid.
all other orders chip to boards service paid with chips were deliverd.
Minersource shiped extra chips part of them used to cover 20 % failed minions and other part is still here as far there is no point to assemble them for loss.
End of story.
The boards we are seling our chip payment for procesed orders.
End of story
|
|
|
|
|
Gratz Dogie.
Now Bick is going to like you for sure
Best Martin
|
|
|
|
Problem solved!
The CPU coolers have transportation apparently not unscathed.
2 of them seem to have no real contact to the chip.
So the chips are overheating.
I'll get buy some new tomorrow.
Thanks Martin for the hint with the LEDs.
Do not bye new !!!!! Just properly reaply these coolers If needed unscrew them and bend the sheet metal a little bit |
|
|
|
Just throwing this out there but, the ignore button will prevent you from reading his opinion in each and every thread here. Is it possible you actually do want to read what he's saying, every single time, so you can complain and refute?
In any case, I find the rivalry between marto and Bick quite hilarious. I wouldn't buy from either of them but it's fun to watch them beat each other up. Marto's been taking the (relatively silent) higher ground lately though I think, which doesn't really say much for his confidence in defense.
And we're still six months waiting on those Hex4M boards, which were paid for up-front and somehow evaporated while Technobit redirected their resources toward developing three or four new products instead.
Just a side note I do not have a memory for your order Order ref please? And how exactly did you paid us and how much ?? P.s. For a long time I do not dare to comment on Bick's comments |
|
|
|
|
Best is to give me Teamviewer access
you can try 930/800
or 1016/820 or 840 option
also please check if coolers are bed with the chip 2 of your chips are making HW most probably overheating.
Also change chip reset timing
|
|
|
|
nice a quick response from technobit...but...how about my 3x hex4m...  my order still wasnt send...still shows Preparation in progressim still waiting... on monday, someone reply to me: HI,
The second order is to be shipped tomorrow or Wednesday
From: hugo fernandes
Sent: Monday, February 23, 2015 3:36 PM
To: Customer service
Subject: [TechnoBit] Message from contact form [no_sync]
TechnoBit
Message from a TechnoBit customer
Customer e-mail address: soulistyces@gmail.com Im still waiting for this order since day 4 of this month!!!!!  to replace one burned your fast to send 3 new your slow.... order THIFVNNBU please send them or ill give up on you guys and asked for a refund one thing for sure i was going to buy more 3 this end of the month and give up on you guys Your sending is out, later you'll get tracking in your account Marto when will you actually ship my 8 replacement boards, the ones that you supposedly would ship 2 weeks ago but never did? ? ? ? ? ? ? Your 8 ones are already @ speedy warehouse expect tracking on PM later today or tomorrow morning |
|
|
|
nice a quick response from technobit...but...how about my 3x hex4m... my order still wasnt send...still shows Preparation in progressim still waiting... on monday, someone reply to me: HI,
The second order is to be shipped tomorrow or Wednesday
From: hugo fernandes
Sent: Monday, February 23, 2015 3:36 PM
To: Customer service
Subject: [TechnoBit] Message from contact form [no_sync]
TechnoBit
Message from a TechnoBit customer
Customer e-mail address: soulistyces@gmail.com Im still waiting for this order since day 4 of this month!!!!! to replace one burned your fast to send 3 new your slow.... order THIFVNNBU please send them or ill give up on you guys and asked for a refund one thing for sure i was going to buy more 3 this end of the month and give up on you guys Your sending is out, later you'll get tracking in your account |
|
|
|
|
Again We are sorry for the mistake.
Replacement have been shipped.
And, Bick......
greetings
|
|
|
|
Order : FJQYCHJMW Today it's a nice surprise that I ordered arrived miner HEX4M from TECHNOBIT.
But my joy vanished when I opened the box. I smelled the smell of burning hardware.
The device was stained with greasy dust ...
Sorry , about this. Please order ref I think I'll be able to send replacement today OK sending prepared I'm going to curiers office now |
|
|
|
Today it's a nice surprise that I ordered arrived miner HEX4M from TECHNOBIT.
But my joy vanished when I opened the box. I smelled the smell of burning hardware.
The device was stained with greasy dust ...
Sorry , about this. Please order ref I think I'll be able to send replacement today |
|
|
|
|
Update:
user and worker stats now have 1,5,60 minutes average
also 1 day and 7 days
|
|
|
|
|
Fair enough.
Again thank you all for the patience and understanding.
We are packing @ the moment .
Just a note : DPD representative here Speedy is accepting sendings in saturday until 14:00
|
|
|
|
|
Yes we have delays and dogie is going to represent it the rating for sure, but you Bick are just making this personal.
And do not tell me it is just because you are fighter for the right.
we are still here.
|
|
|
|
Hi, All,
The site is ok.
We have delays , but if you want a refund just send us e-mail and we'll process it .
Bick and joe are not allowed in this tread
Best Martin
Can not be, I have tried it several times , the server is unavailable. All other Internet-Sites are available here. Unfortunately, i can not post any pictures here so I couldnt prove it to you. That's an odd thing. My wife sent you an e -mail , you have not even read. So what will you tell us? On your website you offers used miners. I have no problems with that. What is the problem to put a used Miner in to a box and send this box to the customers? It is not a brand-new Miner, which still have to be manufactured, it is a used Miner. Do not get me wrong, but I can not understand where there may be some problems. Now seriously, how long, you mean, does it take to shipping a used miner? I ask for one, in your opinion, real deadline. I beleive you got back an e-mail All outstanding orders will be out until the end of this week |
|
|
|
|
New features added to the pool
The pool is configured to start you mining at 1024 difficulty.
The pool supports difficulty setting inside your password. The format is: diff_xxxxxxx, where xxxxxxx can be any positive integer value. For example cgminer -o stratum+tcp://tbdice.org:3333 -u 1BUiW44WuJ2jiJgXiyxJVFMN8bc1GLdXRk.0 -p diff_2048 will strat you mining at 2048.
The new diff feature can be used when you are renting equipment which requires higher difficulty setting, or you just want your Ants pool stats to be accurate and so on...
You can use this simple formula to find out your starting difficulty: Instance speed in GH / 1.4. Example for 1T would be 1000 / 1.4 = 714.28 which equals to -p diff_714. Unless there is no particular reason please do not set your diff inside password string. The pool auto adjusts per instance difficulty to maintain a share rate of approximately 3 shares per 10 seconds.
|
|
|
|
|
Hi, All,
The site is ok.
We have delays , but if you want a refund just send us e-mail and we'll process it .
Bick and joe are not allowed in this tread
Best Martin
|
|
|
|
Hi,All, We are very sorry about some delays and lack of communication last month. We just moved to new own premises and as far we moved together with our custom machined parts shop it took some extra time and effort. more than 50pcs 3 tons+ machines were moved. It is finally over . Starting tomorrow morning our support Vesi is back online and all questions and requests will be addressed as fast as possible. Please if you want a refund or did not get your order yet, just send us a reminder to : office@technobit.euOur design team is working on a device for recuperation of the mining gear heat back to electrical power. Our estimation shows that up to 40% energy cost savings can be achieved. Also our solo pool tbdice.org is going to get new updates With some of you I discussed this over mail or phone Again sorry for the inconvenience and thank you in for the patience and understanding Martin CEO Technobit.eu |
|
|
|
Hi,All, We are very sorry about some delays and lack of communication last month. We just moved to new own premises and as far we moved together with our custom machined parts shop it took some extra time and effort. more than 50pcs 3 tons+ machines were moved. It is finally over . Starting tomorrow morning our support Vesi is back online and all questions and requests will be addressed as fast as possible. Please if you want a refund or did not get your order yet, just send us a reminder to : office@technobit.euOur design team is working on a device for recuperation of the mining gear heat back to electrical power. Our estimation shows that up to 40% energy cost savings can be achieved. Also our solo pool tbdice.org is going to get new updates With some of you I discussed this over mail or phone Again sorry for the inconvenience and thank you in for the patience and understanding Martin CEO Technobit.eu P.s. Bick how are you ? |
|
|
|
Hi,All, We are very sorry about some delays and lack of communication last month. We just moved to new own premises and as far we moved together with our custom machined parts shop it took some extra time and effort. more than 50pcs 3 tons+ machines were moved. It is finally over . Starting tomorrow morning our support Vesi is back online and all questions and requests will be addressed as fast as possible. Please if you want a refund or did not get your order yet, just send us a reminder to : office@technobit.euOur design team is working on a device for recuperation of the mining gear heat back to electrical power. Our estimation shows that up to 40% energy cost savings can be achieved. Also our solo pool tbdice.org is going to get new updates With some of you I discussed this over mail or phone Again sorry for the inconvenience and thank you in for the patience and understanding Martin CEO Technobit.eu P.S. RED letter posts will be removed from this tread |
|
|
|
|
Massive pool site update.
New user friendly interface.
Bootstrap mobile friendly.
|
|
|
|
|
Show Posts
