I hope you will not consider this as a spam here, if so feel free to tell me and I'll remove it

Hi, all we are finishing the PCB design of our 4 chip Spondo RockerBox ASIC based board
Here is a small teaser

Hi, all we are finishing the PCB design of our 4 chip Spondo RockerBox ASIC based board
Here is a small teaser

We are in production of th first batch.
A day or two before shipping you will be contacted to sort transport and stuff.

We have it as an option in the FW, but not enabled for now
We are busy with production flow now.
May be we'll be able to include it on time, but no promises there

try to switch the pool first

New TP-link image and cgminer patch

http://technobit.eu/0_3_6.rar

* 0.3.6
* cgminer for hex BTC Miners - patch to cgminer 4.4.2 rev_45dbbb4cac091e41b0123fd211b6293436921681.patch
* cgminer for hex Scrypt Miners - patch to cgminer 4.4.2 srev_45dbbb4cac091e41b0123fd211b6293436921681.patch
* (s)cgminer A lot of dead/debug code has been removed and some optimizations were made. This image is not tested with HEXA and HEXC (Avalon 1 and Avalon 2) boards. Please be ready to downgrade if something is not working with HEXA and HEXC!
* openwrt updated to r41679
* BE200 (HEXE) options
* --hexminerbe200-options - asic_count:freq - default 16:300
* --hexminerbe200-asic-diff (default 0) - Allowed values are: 0 - diff 1, 1 diff 64, 2 diff 4096 and 3 diff 262144. Use 0 or 1 only. When using 1 make sure --hexminerbe200-nonce-timeout-secs is at least 120 secs! And your pool worker is configured properly, otherwise you are loosing hashes!
* --hexminerbe200-skip-hw-res (default 1) - Do not reset chips log only instead. Before enabling it make sure you your config is ok and it is not too aggressive
* --hexminerbe200-pic-roll (default 60 or 90) - BE200 PIC work internal roll count - Reduces dramatically USB load - range 0-255. Please use at least 10 or 20 here
* --hexminerbe200-hw-err-res (default 10) - reset chip due to N consecutive HW errors.
* --hexminerbe200-nonce-timeout-secs (default 5) - reset chip due to 0 nonces returned nonces returned for last N seconds.
* --hexminerbe200-chip-mask (default ffff Enable all chips) - Hex value to enable or disable chips
* --hexminerbe200-voltage (Default: 860)

We got received 4 chip sending and 2 other are in clearance.
Still waiting for a list from miner source.
If I do not have it by Monday I will construct one based on our order system

Yes

It seems you do not have 12 V on the board.
Check the psu and if it is ok
Just send it for repair/replacement.
Most probably protection blown

So the code is for discount for the GB for the ones paying for assembly with USD or BTC.
For chip Vs assembly just place an order with bank wire , do not pay it and send a msg with the order that you wish 4 chips for assembly and you are part of the GB
than when I have your chips I'll mark the order as payment accepted

250x300x20 mm is with bottom heatsink mounted
in the height 20 you add 25 mm for the bottom fan , then some gap , then the height of your cooler
the Arctic freezer 7 pro we use is 127 mm high

Best will be if you place an order with technobit site
and use tracking and code from minersource.
This way I'll know where to ship.
And minersource will provide me with the list of every sending with the chip owners inside and quantity.

Actualy the chips and boards will come to you together

You can get it from minersource, together wit discount code

HI all,
I got a notice from DHL today for 2 sendings from USA and China.
I took the import documents paid VAT via bank transfer and left papers @ the customs office to wait the money to be confirmed and then papers cleared.
Usually in Bulgaria this takes 2-3 working days. If we got lucky I'll have the chips by the end of the day tomorrow ( second day).
AS soon I have chips in hand and count what received I'll contact miner source for a list of the participants in the GB.
This will be the moment we will count our 2 weeks shipping time.
WE 'll dispatch boards as ready by the orders number as it was placed  in our site .

Sorry for the short answers
In our patch for cgminer you can change both frequency and the core voltage free.
So you can make infinite combinations of Mgs/mVolts in order to find your own sweet spot.
These of you that used our product in the past should know that.

yes

The CAN chaining still stays in our plans , but is not released yet.
There was never time for that
I'll correct the product page.
The connector is mini USB B

I doubt this one will work, but you can try

the base heatsink is 300x250x20
Then add the arctic cooler for height + 120x120x25 fan on the bottom and some room for air under