Krenula revolut banka (debitna visa, crypto trgovina) za srbiju beta testiranje, lista je trenutno oko 1000 ljudi pa se ceka, fee do 300eur nema na podizanju na bankomatu, 2.5% je trgovina crypa... mislim da je odlicna zamena jer su nase banke krenule sve da naplacuju fee za kartice i strane devizne racune! moj referal link: https://revolut.com/r/zeljkorwzbfee jos nema za srbiju ali kontam da ce biti ko za ostale zemlje, kartica je besplatna i nema meesecnog odrzavanja! |
|
|
|
|
its not ok try to have it at 90C or so, I think maybe best thermal pad you can find might help.....
but let see some ppl test them! as you need to remove the cooler to change them
|
|
|
|
You can mine it with t-rex (nvidia) or Wildrig (AMD) wallet can be generated by node or zelcore has it supported (more easy) t-rex.exe --algo progpow-veriblock -o stratum+tcp://vbk-reb0rn.ddns.net:8502 --user vbk_address mining calculator: https://minerstat.com/coin/VBKrewards are maybe 5-8% under calculator due diff retarget and orhants GTX 1070 - 7Mhs current 1.5$ 1080ti - 12mhs 2080ti - 24+ |
|
|
|
It is easy to calculate ETHASH power ow Radeon 6800XT , it is close to 2x 5700XT = 103 to 115 MH/s
can you explain pls how you come to this number  |
|
|
|
more than likely a proportionately higher MH than the 5700/xt based on price point, not necessarily linearly, but close (with optimization). The question isnt so much will it be good at mining, but how good. even with a linear increase in MH/$, if there is even a 10-15% increase in efficiency, it will be out of stock for many months
what price has to do with mining speed    |
|
|
|
|
I have core drop with ubuntu 20.04 and gtx 1070... as soon it pass 54C is drop 10%... with ubuntu 16.04 had no such issue
I am not sure if 18.04 can support them or they added some same crap in newer NV drivers
but if you are on 16.04 then defo some protection to core drop is added in driver!
might test in windows if same shit happen
|
|
|
|
|
No issue with tolerance if you put the screws at right place, but yeah 0.5mm would be a lot better
|
|
|
|
|
They need to learn and use direct cooler block contact to memory and VRM and ALL SOLVED!!!!!!!!!
No CRAPPY THERMAL PADS!!!!!!!!!!
They all sell broken products
|
|
|
|
|
That guy used AF to lock voltage with ctl+f and selecting lowest voltage and L to lock it, issue is its still 1455Mhz
|
|
|
|
|
Issue you can not know as GPU do not crash but driver drop freq as insane ....... you have NVinspector to set manual voltage but I think as its old it do not work on 3xxx
Afterburned dev unwinder from guru3d forum know more but he only allow OC control what he is told by Nvidia
|
|
|
|
|
Speed is more or less good, but POWER could be dropped more issue is just you have no control over it
What happen if you drop PL to 30-45% range does card crash or GPU freq or memory freq crash?
|
|
|
|
|
I did not watch all but most AMD turds are full of shit for 68xx and ETH speed, they have no basic idea what is the limiting factor
saying it will hash 100Mhs can say only total clueless moron and some to post videos about that are insane, or they are here just for click bait shit
memory spec is 512GB/s theoretical speed at 100% utilization and 0 latency is 64Mhs... add on that maybe some magic optimization where ~3% DAG go to L3 which can be read by all CU at once at insane speed maybe add 5% on top, all rest is pure insanity by ppl with no brains
|
|
|
|
|
bad shares i bet are due memory OC, if its GPU miner would crash
|
|
|
|
|
yeah issue is you can`t control clock at voltage, ideal you would find lowest clock needed for 60Mhs and set it and drop voltage at minimum for it
one option is aftrburnel freq/volt editing but it might not have option to undervolt it at that range
|
|
|
|
|
If it hash 52Mhs at 50% TDP just push memory 1000 -1250+ and try to push later some GPU OC if it can/need
also check GPU clock while mining
@alucard20724
try 50-100+ OC on GPU if it does not crash miner... memory at 1250 not big benefit looks like more GPU clock is needed
|
|
|
|
|
Do not do minus on GPU core you need to lover voltage at MAX, it can be hard, as I said use afterbuner open graph with:
ctrl+f
select lowest voltage point with mouse and click L (key) lock voltage, then you can push some OC to GPU at same minimum voltage if ETH need more GPU power
monitor hashrate and frequency, more undervolt can be tested wit nvinspector but I am not sure if it works on 3xxx series
You can even try PL to 60% + GPU oc +100, but best would be if you could drop GPU voltage at minimum
|
|
|
|
|
can anyone test it with GPU underclock / oc to see what is the limit with ethereum mining
maybe even try to use afterbuner perf/power editing and try lover voltage with max GPU OC by pressing : Ctrl + F
and locking minimal voltage on list with select and press L then pushing whole OC up till GPU can handle it
|
|
|
|
|
Sorry EOS is centralized and most ppl only care as they think rich ppl bought it so it will go up in price......
if you want to have sale of token ok, but pls distribute some big part of it as decentralized it can be, as POW GPU or CPU nodes etc
|
|
|
|
|
Sorry all newbies accounts here...
|
|
|
|
There is no staking in Idena, maybe you meant to say mining, but it was recommended in telegram to first turn off node and then delete ipfs folder. Lot of people also have time that is not synced, and it is important to sync it before validation. Windows and some vps are very bad with this. Check your time on: https://time.is/ What's going on in Idena is far from mining, it's more similar to staking. Where do you see staking at all in idena the coins what you see in stake is just there so if you sell account you lose the stake as only way atm to release that coins is to kill the idenity so in general is done to prevent identity trade which can lead to network attack |
|
|
|
|
Show Posts
