BITBURNER FURY Technical discussion

[Killerloop]

It happened to me  too 1 week ago when just stopped out of the blue.The board  turns on ok, green led blinking but no pc can detect it anymore . I'd like to mention that my micro usb connector is firm and tight, soldered onto the board as I ironed & hot glued it first time after I unpacked  6 months ago. Any suggestions are welcomed, thx!

You could try to "CANBUS" it to a working board

[demonseedboy]

Need some help,
So I had a bitburner fury a while back just a single board and after about a week the USB snapped off.

Recently I have recieved another 2 boards in the hope of mining using the other board using a ribbon cable.

I have plugged the ribbon cable intot he one with the missing usb port and the other end into one with a usb port and tried to mine but it just wont. The light on the miner stays a steady flashing green and refuses to mine. I have read that you need to update the firmware on the device to get it working but I can remember doing so before the port snapped off, If you need to do it again with the ribbon cable in what should i do? the usb port has snapped off so there is no way of upadting the board. Right now it is as useful as a flashing vegtable.

thanks for any help guys!

[mastahofdesastah]

Did you put in the jumper's?
Without jumper the can-bus wont work...

[demonseedboy]

You mean to power both the boards?

I have a seperate powerupply for each board.

[mastahofdesastah]

No i mean the can termination Jumpers:
https://www.asic-hardware.com/assembly-instructions-part-2/

You need 2 per board to get them to work.

[HappyS]

Somebody can make iso of SD card? , my card is broken, and i need working image...

[tuanvie]

whether the stock for this item is out of stock?

[ZBC3]

I am pretty sure this isn't being manufactured at this time. You may be able to find use ones available in the marketplace.

[pws328]

I am pretty sure this isn't being manufactured at this time. You may be able to find use ones available in the marketplace.

Would these still be a good buy today? Looking at the kw/Gh/s they still look pretty competitive with the Antminer S1's out there.

[pajak666]

I got one that I am willing to sell.
within EU to avoid customs troubles etc.

[pws328]

I got one that I am willing to sell.
within EU to avoid customs troubles etc.

Unfortunately I'm in the states, so shipping would be a bitch. Thanks for the offer though.

[Killerloop]

I got one that I am willing to sell.
within EU to avoid customs troubles etc.

Is that in perfect working condition? hashrate?