Biodom
Legendary
Offline
Activity: 3864
Merit: 4262
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 01:38:25 AM |
|
Check this out (from pcfli, who might have the inside track): https://bitcointalk.org/index.php?topic=934581.msg12769055#msg12769055New batch is apparently in 10days and will be deprecated to 3.5TH-probably in lieu of the competition that will have a ~3.3Th machine for a bulk price of what was posted here already (very low indeed if it is true). I sincerely hope they would seriously reduce the S7 "lite" price even if this would kill the aftermarket price of S7 "large". Or, maybe they already have a 14/16nm solution?
|
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 01:47:42 AM |
|
Check this out (from pcfli, who might have the inside track): https://bitcointalk.org/index.php?topic=934581.msg12769055#msg12769055New batch is apparently in 10days and will be deprecated to 3.5TH-probably in lieu of the competition that will have a ~3.3Th machine for a bulk price of what was posted here already (very low indeed if it is true). I sincerely hope they would seriously reduce the S7 "lite" price even if this would kill the aftermarket price of S7 "large". Or, maybe they already have a 14/16nm solution? Very interesting sir.
|
For those about to block we salute you! AC->BTC
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 01:53:32 AM |
|
I just believe if and/or when 14/16nm chips are available in rigs, they will be quite pricey.
They are taking preorders and have a price for bulk buyers “The miners are now available for pre-order at a price of 0.87 BTC with a minimum order of 333 miners which is 1 petahash,” Virgilio Lizardo Jr., Head of International at Bitbank told Bitcoin Magazine in an exclusive interview. “This price will be available until November 11, 2015. This winter, the miners will be available with no minimum order required; the price at this time has not been decided yet.” https://bitcoinmagazine.com/articles/bw-to-launch-nm-chip-and-miner-for-general-population-1445278227I wonder if anybody will do a group buy.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 01:55:16 AM |
|
Yea, those are nice.... my DataLogger switch cost be $0.89 /lb .... at a Goodwill outlet .... something like $3-$4 it cost... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) LOL nice I didn't know they sold those things by weight.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 01:57:28 AM |
|
What is the benefit of making a S7+
I have the same question. How much could they really be saving on two controller boards. I think I would rather have the extra controller boards just in case one of them breaks you're not down 4.8th for a month trying to get a replacement.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 01:59:46 AM |
|
Check this out (from pcfli, who might have the inside track): https://bitcointalk.org/index.php?topic=934581.msg12769055#msg12769055New batch is apparently in 10days and will be deprecated to 3.5TH-probably in lieu of the competition that will have a ~3.3Th machine for a bulk price of what was posted here already (very low indeed if it is true). I sincerely hope they would seriously reduce the S7 "lite" price even if this would kill the aftermarket price of S7 "large". Or, maybe they already have a 14/16nm solution? I think its something like the batch 2 being the rejects from Batch 1 except even more unstable at higher freqs than the batch 2's... therefore they have to really drop the clockrate to get the 3.5TH/s and stability Those units that do not make the advertising claims of 4.8TH/s are money thrown out the window if they don't make them work somehow. So it would make sense to throw them through a rework process, if they still don't preform, then lower the clock rate and look for the stability sweet spot and sell them as a de-rated S7. The S7 B2's were de-rated to 575Mhz clock, maybe the S7 B5's are the real flunkers and are clocked for stability at 500Mhz clockrate. Before tossing the ones that don't meet spec into the hopper and take the loss, I would re-work them and look for a workaround to recover some cash from the QC fail units.
|
|
|
|
UfoRia
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 01:59:51 AM |
|
Anyone know what the s7 firmware updates have included? There are no release notes.. https://www.bitmaintech.com/support.htm?pid=00720151023101739550pOBiK5sO06A0Antminer S7 - Firmware FileName Description SD-S7-20151023-600M.tar.gz S7 Firmware - 600M, 4.86th/s miner MD5: 580FF296CF87029932B5B1A53FF7844C SD-S7-20151023-575M.tar.gz S7 Firmware - 575M, 4.66th/s miner MD5: D0F9579AF26B8276F9073A752BE029FC SD-S7-20151023-550M.tar.gz S7 Firmware - 550M, 4.45th/s miner MD5: 64E0BDFCEC572CA833C390ED372E7175 Also, I wonder why they are deleting posts? I had a post that I have on another tab that was simply deleted. Seems odd... BTW, cryptoGlance for managing miners rocks! I installed them on my farm, one was in a weird state afterwards, but recovered after a soft restart of the controller. edit: I have noticed a more stable variance after updating to the 600M firmware on their site. I had two s7's that were all over the place, so that makes me happy. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Ufo
|
If I have been a help, my BTC donation address -> 1GUEqAzbMvwkY7hbb6bauhY6AkVoCSXDkp
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:02:56 AM |
|
What is the benefit of making a S7+
I have the same question. How much could they really be saving on two controller boards. I think I would rather have the extra controller boards just in case one of them breaks you're not down 4.8th for a month trying to get a replacement. Will poolside hashrate be higher if you are running more through one controller with higher difficulty ?
|
For those about to block we salute you! AC->BTC
|
|
|
Biodom
Legendary
Offline
Activity: 3864
Merit: 4262
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:04:51 AM |
|
Check this out (from pcfli, who might have the inside track): https://bitcointalk.org/index.php?topic=934581.msg12769055#msg12769055New batch is apparently in 10days and will be deprecated to 3.5TH-probably in lieu of the competition that will have a ~3.3Th machine for a bulk price of what was posted here already (very low indeed if it is true). I sincerely hope they would seriously reduce the S7 "lite" price even if this would kill the aftermarket price of S7 "large". Or, maybe they already have a 14/16nm solution? I think its something like the batch 2 being the rejects from Batch 1 except even more unstable at higher freqs than the batch 2's... therefore they have to really drop the clockrate to get the 3.5TH/s and stabilityThose units that do not make the advertising claims of 4.8TH/s are money thrown out the window if they don't make them work somehow. So it would make sense to throw them through a rework process, if they still don't preform, then lower the clock rate and look for the stability sweet spot and sell them as a de-rated S7. The S7 B2's were de-rated to 575Mhz clock, maybe the S7 B5's are the real flunkers and are clocked for stability at 500Mhz clockrate. Before tossing the ones that don't meet spec into the hopper and take the loss, I would re-work them and look for a workaround to recover some cash from the QC fail units. very unlikely, in my opinion interestingly, if software provides option for 4.45TH miner, I wonder what is it?
|
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:07:51 AM |
|
Yea, those are nice.... my DataLogger switch cost be $0.89 /lb .... at a Goodwill outlet .... something like $3-$4 it cost... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) LOL nice I didn't know they sold those things by weight. It was at a Goodwill ~outlet~ / warehouse, not at one of their retail stores. The outlet is the last chance to get things before its recycled for materials. Once in a while you can find some real interesting stuff there. For instance , one visit I picked up a laboratory autoclave and a Baush & Lomb microscope for that same $.89 /lb ...
|
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:09:32 AM |
|
Anyone know what the s7 firmware updates have included? There are no release notes.. https://www.bitmaintech.com/support.htm?pid=00720151023101739550pOBiK5sO06A0Antminer S7 - Firmware FileName Description SD-S7-20151023-600M.tar.gz S7 Firmware - 600M, 4.86th/s miner MD5: 580FF296CF87029932B5B1A53FF7844C SD-S7-20151023-575M.tar.gz S7 Firmware - 575M, 4.66th/s miner MD5: D0F9579AF26B8276F9073A752BE029FC SD-S7-20151023-550M.tar.gz S7 Firmware - 550M, 4.45th/s miner MD5: 64E0BDFCEC572CA833C390ED372E7175 Also, I wonder why they are deleting posts? I had a post that I have on another tab that was simply deleted. Seems odd... BTW, cryptoGlance for managing miners rocks! I installed them on my farm, one was in a weird state afterwards, but recovered after a soft restart of the controller. edit: I have noticed a more stable variance after updating to the 600M firmware on their site. I had two s7's that were all over the place, so that makes me happy. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Ufo what was the firmware before you switched?
|
For those about to block we salute you! AC->BTC
|
|
|
UfoRia
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:10:32 AM |
|
what was the firmware before you switched?
The stock one, I have a watcher on that page and it pinged me the page changed. I then went to the bitmain support page and downloaded the new firmware. Ufo
|
If I have been a help, my BTC donation address -> 1GUEqAzbMvwkY7hbb6bauhY6AkVoCSXDkp
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:13:32 AM |
|
Check this out (from pcfli, who might have the inside track): https://bitcointalk.org/index.php?topic=934581.msg12769055#msg12769055New batch is apparently in 10days and will be deprecated to 3.5TH-probably in lieu of the competition that will have a ~3.3Th machine for a bulk price of what was posted here already (very low indeed if it is true). I sincerely hope they would seriously reduce the S7 "lite" price even if this would kill the aftermarket price of S7 "large". Or, maybe they already have a 14/16nm solution? I think its something like the batch 2 being the rejects from Batch 1 except even more unstable at higher freqs than the batch 2's... therefore they have to really drop the clockrate to get the 3.5TH/s and stabilityThose units that do not make the advertising claims of 4.8TH/s are money thrown out the window if they don't make them work somehow. So it would make sense to throw them through a rework process, if they still don't preform, then lower the clock rate and look for the stability sweet spot and sell them as a de-rated S7. The S7 B2's were de-rated to 575Mhz clock, maybe the S7 B5's are the real flunkers and are clocked for stability at 500Mhz clockrate. Before tossing the ones that don't meet spec into the hopper and take the loss, I would re-work them and look for a workaround to recover some cash from the QC fail units. very unlikely, in my opinion interestingly, if software provides option for 4.45TH miner, I wonder what is it? Maybe they are using two boards only because too many failed and they have more chassis than boards to fill them.
|
For those about to block we salute you! AC->BTC
|
|
|
Finksy
Legendary
Offline
Activity: 1022
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:16:43 AM |
|
Finksy, I've got 2 2880 PSUs powering 3 S7s. Originally I thought I would put one complete S7 on each PSU, then split the third one across the PSUs.
In the end I put one S7 one one PSU and 2 S7s on the other. I figured that two S7s on a single 2880 PSU only take up 80%, so that seemed reasonable. Also this configuration is simpler to keep track of in case I ever need to power cycle the PSUs from the PDUs (this is all deployed at a data center).
Of course one PSU is underburdened, but them's the breaks. I don't have enough physical space to add another S7.
Another potential drawback is that the 2 new S7s that are on a single PSU are both very strong performers. They are candidates for overclocking, but then they're eating into that 20% headroom.
Does the above configuration make sense to you, or are there tangible benefits to splitting the third S7 across the two PSUs?
I would split the 3rd S7 across the two PSU's, as you'll be moving the lower PSU into the efficiency sweet spot of 60-80% load, unless having to power cycle them remotely is something you are concerned with having to do (since you're dealing w/ hosting at a DC) just a weekend there, we will probably see new batches on Monday or even sunday pm. If bw will really produce something in winter time, BMT will be pressed to accelerate the 14/16nm rollout.
Only if the 14/16nm performance and pricing beats BMT's 28nm offering. If BMT was really wanting to chase 14/16nm tech they would have, but instead they took the wise road and get something to market with impressive efficiency before anyone else.
|
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:16:56 AM |
|
what was the firmware before you switched?
The stock one, I have a watcher on that page and it pinged me the page changed. I then went to the bitmain support page and downloaded the new firmware. Ufo I'll be testing these. All of mine are running good at 600 but one came clocked at 575 and it runs hot But steady 4.6
|
For those about to block we salute you! AC->BTC
|
|
|
UfoRia
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:20:20 AM |
|
I'll be testing these. All of mine are running good at 600 but one came clocked at 575 and it runs hot
The variance is much smaller from what I can see, although the sample size is an hour. Not sure what they changed since it's not documented, but the swings are not as large. I have nine s7's that I am using a reference, so I am hopeful they fixed some of the swings I was seeing that I was worried about earlier. Miner Type Antminer S7 Hardware Version 2.5.3.0 Kernel Version Linux 3.8.13 #22 SMP Tue Dec 2 15:26:11 CST 2014 File System Version Fri Oct 23 16:21:24 CST 2015 Cgminer Version 4.8.0 edit: I got my order very late in the b1 block, so my miners likely went through the qa\qc process once they discovered the issues Ufo
|
If I have been a help, my BTC donation address -> 1GUEqAzbMvwkY7hbb6bauhY6AkVoCSXDkp
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:25:24 AM |
|
I'll be testing these. All of mine are running good at 600 but one came clocked at 575 and it runs hot
The variance is much smaller from what I can see, although the sample size is an hour. Not sure what they changed since it's not documented, but the swings are not as large. I have nine s7's that I am using a reference, so I am hopeful they fixed some of the swings I was seeing that I was worried about earlier. Miner Type Antminer S7 Hardware Version 2.5.3.0 Kernel Version Linux 3.8.13 #22 SMP Tue Dec 2 15:26:11 CST 2014 File System Version Fri Oct 23 16:21:24 CST 2015 Cgminer Version 4.8.0 edit: I got my order very late in the b1 block, so my miners likely went through the qa\qc process once they discovered the issues Ufo I have 15 s7's running at nicehash getting 68th to 78th, would be great to stabilize that. S5's were pretty stable
|
For those about to block we salute you! AC->BTC
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:28:32 AM |
|
Batch 3 is up again on bitmaintech
|
For those about to block we salute you! AC->BTC
|
|
|
UfoRia
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:28:52 AM |
|
I have 15 s7's running at nicehash getting 68th to 78th, would be great to stabilize that. S5's were pretty stable
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi272.photobucket.com%2Falbums%2Fjj169%2Ft00le%2Fs7s.png&t=665&c=_F63uij-EOiSyg)
|
If I have been a help, my BTC donation address -> 1GUEqAzbMvwkY7hbb6bauhY6AkVoCSXDkp
|
|
|
wolfen
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 24, 2015, 02:36:10 AM |
|
I have 15 s7's running at nicehash getting 68th to 78th, would be great to stabilize that. S5's were pretty stable
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi272.photobucket.com%2Falbums%2Fjj169%2Ft00le%2Fs7s.png&t=665&c=_F63uij-EOiSyg) So the firmware version is the file system version/date? I forget. You're running the new 600 firmware?
|
For those about to block we salute you! AC->BTC
|
|
|
|