dib0
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 03, 2016, 03:45:33 PM |
|
Update: I see the VCN is payed out (to a non existing address or a lucky someone). But the stats don't change. Can you take a look at that? I'd rather not post my wallet address publicly. Can I send it to you directly (looking in to that now)
Should be ok now. I think... since the wallet address versions are the same.... if you dump your priv key for that address in VRC wallet and import it in a VCN wallet... you'll find your coins Can't say I've tried it but that's my understanding. Thanks! It's working right now. I'll try the trick with the private key.
|
|
|
|
pginvest
|
|
February 03, 2016, 04:30:59 PM |
|
Used to mine on xpool, but today i've noticed a migration to zpool. What will happen to the balance on xpool? Lost or migrated to the same wallet? Thanks
|
Am I spamming? Report me!
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
February 03, 2016, 04:33:54 PM |
|
Used to mine on xpool, but today i've noticed a migration to zpool. What will happen to the balance on xpool? Lost or migrated to the same wallet? Thanks
As the remaining blocks are confirmed from xpool, the payouts will continue until none are left. All min payouts have been dropped to lower amounts to help payout miners that were't quite to the original min payouts. BTC=0.0001 LTC=0.001 BTCD=0.0001 DASH=0.0001 FIBRE=0.0001 BITS=1 VRC=0.01
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
pginvest
|
|
February 03, 2016, 04:35:54 PM |
|
Used to mine on xpool, but today i've noticed a migration to zpool. What will happen to the balance on xpool? Lost or migrated to the same wallet? Thanks
As the remaining blocks are confirmed from xpool, the payouts will continue until none are left. All min payouts have been dropped to lower amounts to help payout miners that were't quite to the original min payouts. BTC=0.0001 LTC=0.001 BTCD=0.0001 DASH=0.0001 FIBRE=0.0001 BITS=1 VRC=0.01 And even if its not near the minimum (BTC)?
|
Am I spamming? Report me!
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
February 03, 2016, 04:45:35 PM |
|
Used to mine on xpool, but today i've noticed a migration to zpool. What will happen to the balance on xpool? Lost or migrated to the same wallet? Thanks
As the remaining blocks are confirmed from xpool, the payouts will continue until none are left. All min payouts have been dropped to lower amounts to help payout miners that were't quite to the original min payouts. BTC=0.0001 LTC=0.001 BTCD=0.0001 DASH=0.0001 FIBRE=0.0001 BITS=1 VRC=0.01 And even if its not near the minimum (BTC)? If it doesn't reach the above minimums then it won't get processed.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
dudu2000
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 03, 2016, 04:54:04 PM |
|
Hi Does Zpool pays LTC? Asking because I'm mining for almost 3 days, there is no payment. My wallet is recognised as LTC wallet on site (LNRKM14ve4uXyzrfompz9J1e2VFWW1cVfz) but nothing happened last 3 days. Now, short story, long story . I have tried to add the parameter c=LTC on the miners config and, by mistake, I wrote BTC. After the miner was started, my balance dropped from 0.33 LTC to 0.03 LTC (see the picture). Even I corrected the line, the balance is gone. Any chanse to get back that amount? http://imgur.com/SnLrEW7Example of my cmd: setx gpu_max_alloc_percent 100 ccminer21.exe --devices=3 --algo=x11 -o stratum+tcp://mine.zpool.ca:3533 -u LNRKM14ve4uXyzrfompz9J1e2VFWW1cVfz -p "c=LTC" pause Thanks
|
|
|
|
pginvest
|
|
February 03, 2016, 04:56:25 PM |
|
Thanks [/quote]
As the remaining blocks are confirmed from xpool, the payouts will continue until none are left. All min payouts have been dropped to lower amounts to help payout miners that were't quite to the original min payouts.
BTC=0.0001 LTC=0.001 BTCD=0.0001 DASH=0.0001 FIBRE=0.0001 BITS=1 VRC=0.01 [/quote] And even if its not near the minimum (BTC)? [/quote]
If it doesn't reach the above minimums then it won't get processed. [/quote] But can it be transfered to zpool using the same btc address?
|
Am I spamming? Report me!
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
February 03, 2016, 05:09:50 PM |
|
Thanks
As the remaining blocks are confirmed from xpool, the payouts will continue until none are left. All min payouts have been dropped to lower amounts to help payout miners that were't quite to the original min payouts. BTC=0.0001 LTC=0.001 BTCD=0.0001 DASH=0.0001 FIBRE=0.0001 BITS=1 VRC=0.01 [/quote] And even if its not near the minimum (BTC)? [/quote] If it doesn't reach the above minimums then it won't get processed. [/quote] But can it be transfered to zpool using the same btc address? [/quote] No they won't be.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
February 03, 2016, 05:17:49 PM |
|
Hi Does Zpool pays LTC? Asking because I'm mining for almost 3 days, there is no payment. My wallet is recognised as LTC wallet on site (LNRKM14ve4uXyzrfompz9J1e2VFWW1cVfz) but nothing happened last 3 days. Now, short story, long story . I have tried to add the parameter c=LTC on the miners config and, by mistake, I wrote BTC. After the miner was started, my balance dropped from 0.33 LTC to 0.03 LTC (see the picture). Even I corrected the line, the balance is gone. Any chanse to get back that amount? Example of my cmd: setx gpu_max_alloc_percent 100 ccminer21.exe --devices=3 --algo=x11 -o stratum+tcp://mine.zpool.ca:3533 -u LNRKM14ve4uXyzrfompz9J1e2VFWW1cVfz -p "c=LTC" pause Thanks It does, but it's supposed to be paid out from mined LTC blocks... which we're not near enough miners to mine LTC, so for now, LTC needs to be topped up manually untill we gain enough scrypt miners to start mining LTC blocks. So payouts for LTC will be irregular but you should see it in the next day or so. We can't recover balances from the wrong currencies used/detected.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
dib0
Newbie
Offline
Activity: 4
Merit: 0
|
|
February 04, 2016, 07:27:29 AM |
|
Update: I see the VCN is payed out (to a non existing address or a lucky someone). But the stats don't change. Can you take a look at that? I'd rather not post my wallet address publicly. Can I send it to you directly (looking in to that now)
Should be ok now. I think... since the wallet address versions are the same.... if you dump your priv key for that address in VRC wallet and import it in a VCN wallet... you'll find your coins Can't say I've tried it but that's my understanding. Just checked the dashboard this morning. It switches to VRC, but the earnings are the VNC earnings. I think that after a while things get updated. How old is the data in the stats? 24 hours? I'll check after that period if it shows the right data. I think it does work now, since I reveice VRC payments (but that can also be my xpool payments, or are they already stopped)?
|
|
|
|
AngryDwarf
|
|
February 04, 2016, 07:49:45 AM |
|
SHA256 port been down for nearly two hours now. This port seems to suffer from frequent disconnects over the last few weeks.
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
February 04, 2016, 12:08:44 PM |
|
SHA256 port been down for nearly two hours now. This port seems to suffer from frequent disconnects over the last few weeks.
Shoot, I left the sha port in debug and it didn't restart. Still trying to track down the issue you mention. It seems one of the wallets is causing a problem, just not sure which one(s). I may start disabling some of the non mainstream, newer wallets to try and find which ones are being problematic. There's also a couple on the scrypt port causing the same problem. Working on adding different functionality for communicating with the wallets to overcome this issue.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
AngryDwarf
|
|
February 04, 2016, 12:49:50 PM |
|
SHA256 port been down for nearly two hours now. This port seems to suffer from frequent disconnects over the last few weeks.
Shoot, I left the sha port in debug and it didn't restart. Still trying to track down the issue you mention. It seems one of the wallets is causing a problem, just not sure which one(s). I may start disabling some of the non mainstream, newer wallets to try and find which ones are being problematic. There's also a couple on the scrypt port causing the same problem. Working on adding different functionality for communicating with the wallets to overcome this issue. Pleased to hear you are aware of the issue and I'm sure you will get to the bottom of it. Thank you for the ongoing support.
|
|
|
|
paputa
|
|
February 04, 2016, 10:55:24 PM |
|
now can i rent sha 256? however the "new code" on register page in rental page not work
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
|
February 04, 2016, 11:07:33 PM |
|
Ive been commenting on, and still seeing the same issue: using SHA256 on my wallet I am shown as ~1.5% of the pools hashrate; but on each coins mined; I am barely seeing above 1% share credit. This is from a single S3 @ ~420Gh avg.
~80-90% credit on shares is what it seems to be when all is said and done. Which kind of equals up to the problems I was having with rentals; renting several times for 24 hrs and not meeting the goals that were expected when calculating the profitability several times per day during that rental.. Being close to 25% of the pool hashrate; and only seeing shares close to 18-20% the entire time. I even did a large hashrate rental to be as close to 50% as possible of the pool average hashrate (renting 55Th); and only seeing 40-45% share credit.
This goes far past the 2% pool share and the NH rental fees.....
All tests were done independently; on different days, for a minimum of 24 hours to be sure its not a fluke of bad luck. Its been consistent.
Note; all rentals are from nicehash; not zpool =)
any thoughts? Anyone else seeing the same thing?
|
|
|
|
paputa
|
|
February 04, 2016, 11:49:23 PM |
|
Ive been commenting on, and still seeing the same issue: using SHA256 on my wallet I am shown as ~1.5% of the pools hashrate; but on each coins mined; I am barely seeing above 1% share credit. This is from a single S3 @ ~420Gh avg.
~80-90% credit on shares is what it seems to be when all is said and done. Which kind of equals up to the problems I was having with rentals; renting several times for 24 hrs and not meeting the goals that were expected when calculating the profitability several times per day during that rental.. Being close to 25% of the pool hashrate; and only seeing shares close to 18-20% the entire time. I even did a large hashrate rental to be as close to 50% as possible of the pool average hashrate (renting 55Th); and only seeing 40-45% share credit.
This goes far past the 2% pool share and the NH rental fees.....
All tests were done independently; on different days, for a minimum of 24 hours to be sure its not a fluke of bad luck. Its been consistent.
Note; all rentals are from nicehash; not zpool =)
any thoughts? Anyone else seeing the same thing?
i have rent from nicehash and i have only lost btc because the profitable isn't correct if i pay 0,10-0,12 btc for gh/s and i see the profitable at 0,15-0,18 btc for gh/s i will lost the btc, why?
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
|
February 05, 2016, 12:04:23 AM |
|
for all my rentals they have usually rented at 0.0044-0.0048 or so; spending ~26mBTC. Generating 19-21mBTC after the rental is up.... which is close to the amount the share reports are off by; and thats also with an extra S3 running that consistently generated 2.2mBTC/day.
The hashrate reporting is almost nominal; within a few percent; so I know those per-share hashrate calcs are good =)
|
|
|
|
paputa
|
|
February 05, 2016, 12:07:50 AM |
|
for all my rentals they have usually rented at 0.0044-0.0048 or so; spending ~26mBTC. Generating 19-21mBTC after the rental is up.... which is close to the amount the share reports are off by; and thats also with an extra S3 running that consistently generated 2.2mBTC/day.
The hashrate reporting is almost nominal; within a few percent; so I know those per-share hashrate calcs are good =)
sorry you pay 26 mBTC for earn 19-21?
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
|
February 05, 2016, 12:16:09 AM Last edit: February 05, 2016, 12:27:58 AM by JaredKaragen |
|
for all my rentals they have usually rented at 0.0044-0.0048 or so; spending ~26mBTC. Generating 19-21mBTC after the rental is up.... which is close to the amount the share reports are off by; and thats also with an extra S3 running that consistently generated 2.2mBTC/day.
The hashrate reporting is almost nominal; within a few percent; so I know those per-share hashrate calcs are good =)
sorry you pay 26 mBTC for earn 19-21? yes. Each time I calculated based on profitability reports from the pool through the day; the estimates should have been to earn 1-3mBTC after 24 hours. They obviously kept falling way short. Even on a days when rental was a lot cheaper than the previous day. I have a nagging suspicion it has to do with the major difference between pool hashrate % and share reward % that I can see on my zpool wallet page. I expected to loose out from the start; so I wasn't disappointed if I did loose coin; its not that much of a loss to help the pool try and see if there truly is an issue with the calculations somewhere. I just dont have any way else to explain away the difference between pool hashrate % (on left side where total share amount from each algo is displayed), and the share value of the coins on the right pane where it lists found blocks and credit for them. Example:
|
|
|
|
paputa
|
|
February 05, 2016, 12:26:41 AM |
|
for all my rentals they have usually rented at 0.0044-0.0048 or so; spending ~26mBTC. Generating 19-21mBTC after the rental is up.... which is close to the amount the share reports are off by; and thats also with an extra S3 running that consistently generated 2.2mBTC/day.
The hashrate reporting is almost nominal; within a few percent; so I know those per-share hashrate calcs are good =)
sorry you pay 26 mBTC for earn 19-21? yes. Each time I calculated based on profitability reports from the pool through the day; the estimates should have been to earn 1-3mBTC after 24 hours. They obviously kept falling way short. Even on a days when rental was a lot cheaper than the previous day. I have a nagging suspicion it has to do with the major difference between pool hashrate % and share reward % that I can see on my zpool wallet page. I expected to loose out from the start; so I wasn't disappointed if I did loose coin; its not that much of a loss to help the pool try and see if there truly is an issue with the calculations somewhere. I just dont have any way else to explain away the difference between pool hashrate % (on left side where total share amount from each algo is displayed), and the share value of the coins on the right pane where it lists found blocks and credit for them. Example: ah ok however the shares aren't the % of the new block
|
|
|
|
|