█▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC

[Megaquake]

Seems that the Ant s3 is the best miner for this pool hands down, an s5 has issues with staying connected even with running one blade on my s5 they still have issues

The s3s keeps going strong while the others fall over, I dont know what the difference is but the s3 even finds more blocks per hash then the s5s.

[orionpaxx12]

Can i ask for a little help, i am mining at 1.7mh/s on the neoscrypt port at 1300w, how do i go about calculating to find out if this is going to be profitable, thanks in advance

[Megaquake]

Can i ask for a little help, i am mining at 1.7mh/s on the neoscrypt port at 1300w, how do i go about calculating to find out if this is going to be profitable, thanks in advance

at profitability of 4.92019 mbtc per mh a day divide that by 1k then multiply by your hashrate 0.00492019x1.7= profit

@ 1300w what are you mining with I hope thats just your PSU rating, no profit unless your electricity charge is nearly free.

[Megaquake]

'We have 2 coin wallets*SHA256 that require upgrading Terra and Joule, hope we don't loose BTC.

https://bitcointalk.org/index.php?topic=1364146.msg16148565#msg16148565

[orionpaxx12]

Can i ask for a little help, i am mining at 1.7mh/s on the neoscrypt port at 1300w, how do i go about calculating to find out if this is going to be profitable, thanks in advance

at profitability of 4.92019 mbtc per mh a day divide that by 1k then multiply by your hashrate 0.00492019x1.7= profit

@ 1300w what are you mining with I hope thats just your PSU rating, no profit unless your electricity charge is nearly free.

thanks i will do that, i have a CORSAIR RMx Series RM1000X 1000W 80 PLUS GOLD  and an old 700w psu its almost worthless i am running 3 r9 390x's/ 1 r9 280x toxic and 1 r7 370

my kilowatt per hour is .10$ cent so no its not to profitable i actually have a better psu coming, getting rid of the old 700w its going to be 80 PLUS GOLD so i hope that helps and i am switching to gtx 1070's

[berron]

Pool is ignoring my diff settings again, at least in libry and lira2v2. All was working perfectly till yesterday evening (GMT). Any change has been done in the pool??? I don't know if could be related with my scrypt, but it worked perfectly till yerterday...

@echo off
SETLOCAL EnableExtensions
PATH=C:\Minado
SET ADDY=DLwEK1kS3KKsNuFNQ6xtPhabNzkeKqaoVY
SET ID=960,
SET A=ccminer18-tpruvot.exe
SET B=ccminer181-tpruvot.exe
SET C=ccminer176-tpruvot-nanashi.exe
SET D=ccminer1.5.79-sp.exe
SET E=ccminer1.5.80-sp.exe
SET F=ccminer1.5.78-djm34-neoscrypt.exe
SET POOL1=stratum+tcp://
SET POOL2=.mine.zpool.ca
SET COUNTER=0
COLOR 0A
SET A16=skein
SET A18=lbry
SET A05=lyra2v2
SET A06=neoscrypt
SET A14=x17
SET A20=x11evo
SET A19=myr-gr
SET A15=nist5
SET A07=decred
SET A12=blake2s
SET A09=c11
:start
SET /A COUNTER=%COUNTER%+1
SET PASS=%ID%c=XVG,skein=173,x11evo=4.66,lyra2v2=14.1,x17=3.14,neoscrypt=0.387,myr-gr=25.8,blake2s=0.685,nist5=16.7,c11=5.00,lbry=90.8,decred=1.02,stats
ECHO Starting miner processes....
start "%A16%" /wait /min %E% -r 0 -i 20.5 -a %A16% -o %POOL1%%A16%%POOL2%:4933 -u %ADDY% -p %PASS%,d=0.5 -c ccminer180.conf
start "%A18%" /wait /min %B% -r 0 -a %A18% -o %POOL1%%A18%%POOL2%:3334 -u %ADDY% -p %PASS%,d=26 -c ccminer180.conf
start "%A05%" /wait /min %A% -r 0 -i 19.5 -a %A05% -o %POOL1%%A05%%POOL2%:4533 -u %ADDY% -p %PASS%,d=16 -c ccminer180.conf
start "%A06%" /wait /min %A% -r 0 -a %A06% -o %POOL1%%A06%%POOL2%:4233 -u %ADDY% -p %PASS%,d=48 -c ccminer180.conf
start "%A14%" /wait /min %C% -r 0 -i 19.5 -a %A14% -o %POOL1%%A14%%POOL2%:3737 -u %ADDY% -p %PASS%,d=0.008 -c ccminer180.conf
start "%A20%" /wait /min %A% -r 0 -i 20 -a %A20% -o %POOL1%%A20%%POOL2%:3553 -u %ADDY% -p %PASS%,d=0.012 -c ccminer180.conf
start "%A19%" /wait /min %A% -r 0 -i 19 -a %A19% -o %POOL1%%A19%%POOL2%:5433 -u %ADDY% -p %PASS%,d=0.1 -c ccminer180.conf
start "%A15%" /wait /min %A% -r 0 -a %A15% -o %POOL1%%A15%%POOL2%:3833 -u %ADDY% -p %PASS%,d=0.08 -c ccminer180.conf
start "%A07%" /wait /min %B% -r 0 -a %A07% -i 25 -o %POOL1%%A07%%POOL2%:5744 -u %ADDY% -p %PASS%,d=2 -c ccminer180.conf
start "%A12%" /wait /min %C% -r 0 -i 25 -a %A12% -o %POOL1%%A12%%POOL2%:5766 -u %ADDY% -p %PASS%,d=2 -c ccminer180.conf
start "%A09%" /wait /min %E% -r 0 -i 19 -a %A09% -o %POOL1%%A09%%POOL2%:3573 -u %ADDY% -p %PASS%,d=0.016 -c ccminer180.conf
CLS
ECHO -------------------------------------------------------------------------------
ECHO Total number of rounds:  %COUNTER%
GOTO start

JK's nVidia zPool Miner Batch V1.06
Berron modified
,x13=13.8
,qubit=25.4
,quark=31.7
,blakecoin=5.80
,x15=12.0
,x14=13.7
,sib=4.47

Feel free to copy it if you want, credits for JK, I have only adapted a bit to my computer to avoid some minor problems. Values are from a Gigabyte GTX960 with no overclocking.

[Megaquake]

Pool is ignoring my diff settings again, at least in libry and lira2v2. All was working perfectly till yesterday evening (GMT). Any change has been done in the pool??? I don't know if could be related with my scrypt, but it worked perfectly till yerterday...

Your difficulty for lbry should be around 150-180 for the gtx960

[Megaquake]

Can i ask for a little help, i am mining at 1.7mh/s on the neoscrypt port at 1300w, how do i go about calculating to find out if this is going to be profitable, thanks in advance

at profitability of 4.92019 mbtc per mh a day divide that by 1k then multiply by your hashrate 0.00492019x1.7= profit

@ 1300w what are you mining with I hope thats just your PSU rating, no profit unless your electricity charge is nearly free.

thanks i will do that, i have a CORSAIR RMx Series RM1000X 1000W 80 PLUS GOLD  and an old 700w psu its almost worthless i am running 3 r9 390x's/ 1 r9 280x toxic and 1 r7 370

my kilowatt per hour is .10$ cent so no its not to profitable i actually have a better psu coming, getting rid of the old 700w its going to be 80 PLUS GOLD so i hope that helps and i am switching to gtx 1070's

Yes the 1070s are a good choice for both performance and energy savings.

[berron]

Pool is ignoring my diff settings again, at least in libry and lira2v2. All was working perfectly till yesterday evening (GMT). Any change has been done in the pool??? I don't know if could be related with my scrypt, but it worked perfectly till yerterday...

Your difficulty for lbry should be around 150-180 for the gtx960

Sorry, but I think that's not the problem. As you say, my diff was a bit low for lbry, I was getting around 10-12 shares per minute, but with almost no reject. But since yesterday stratum is ignoring my diff totally, it put lbry diff at 1 and, well, you can imagine, tens or shares per minute with a big rejection percentaje. Nevertheless, I'm going to prove my scrypt with 150 diff to see what happens.

Thanks in advance.

[Megaquake]

Pool is ignoring my diff settings again, at least in libry and lira2v2. All was working perfectly till yesterday evening (GMT). Any change has been done in the pool??? I don't know if could be related with my scrypt, but it worked perfectly till yerterday...

Your difficulty for lbry should be around 150-180 for the gtx960

Sorry, but I think that's not the problem. As you say, my diff was a bit low for lbry, I was getting around 10-12 shares per minute, but with almost no reject. But since yesterday stratum is ignoring my diff totally, it put lbry diff at 1 and, well, you can imagine, tens or shares per minute with a big rejection percentaje. Nevertheless, I'm going to prove my scrypt with 150 diff to see what happens.

Thanks in advance.

I agree that's not the issue but your diff is way to low

[berron]

I  know that this info is in this thread, but I'm not able to find it. What's the recommended number of shares per minute?
Thanks

[Megaquake]

I  know that this info is in this thread, but I'm not able to find it. What's the recommended number of shares per minute?
Thanks

A diff of 50 for every 100mhs should return around 16 shares a minute for lbry, I have seen it drop lower than that at times though not sure why.

[ComputerGenie]

I  know that this info is in this thread, but I'm not able to find it. What's the recommended number of shares per minute?
Thanks

....

So my suggestion is to aim for a share return rate no higher than the highest difficulty that keeps you at 1% variance if you are setting a "minimum difficulty" or perhaps the value that keeps you under 1.2% for a fixed difficulty. This can be worked out easily if you know your hashrate without even testing it.

So our target is a diff that returns 20-25 shares per minute.
Every 71.6MH/s returns one share per minute - therefore every GH/s returns about 14 shares per minute.

A share return rate of 20 needs a diff of 1 per 1.432GH/s if setting a fixed difficulty.
A share return rate of 25 needs a diff of 1 per 1.79GH/s if setting a minimum difficulty.

...

TL:DR
Set your diff to your worker's hashrate in GH / 1.4

[Megaquake]

I  know that this info is in this thread, but I'm not able to find it. What's the recommended number of shares per minute?
Thanks

....

So my suggestion is to aim for a share return rate no higher than the highest difficulty that keeps you at 1% variance if you are setting a "minimum difficulty" or perhaps the value that keeps you under 1.2% for a fixed difficulty. This can be worked out easily if you know your hashrate without even testing it.

So our target is a diff that returns 20-25 shares per minute.
Every 71.6MH/s returns one share per minute - therefore every GH/s returns about 14 shares per minute.

A share return rate of 20 needs a diff of 1 per 1.432GH/s if setting a fixed difficulty.
A share return rate of 25 needs a diff of 1 per 1.79GH/s if setting a minimum difficulty.

...

TL:DR
Set your diff to your worker's hashrate in GH / 1.4

Do not use this method to calculate your difficulty for lbry.

[JaredKaragen]

Pool is ignoring my diff settings again, at least in libry and lira2v2. All was working perfectly till yesterday evening (GMT). Any change has been done in the pool??? I don't know if could be related with my scrypt, but it worked perfectly till yerterday...

JK's nVidia zPool Miner Batch V1.06
Berron modified
,x13=13.8
,qubit=25.4
,quark=31.7
,blakecoin=5.80
,x15=12.0
,x14=13.7
,sib=4.47

Feel free to copy it if you want, credits for JK, I have only adapted a bit to my computer to avoid some minor problems. Values are from a Gigabyte GTX960 with no overclocking.

Interesting =)  Glad it seems to have a good effect.

I am curious as to what you are using ccminer.conf to contain?

Presently I am having no issues with manual diff settings.  If its a diff the stratum will not accept (fraction, etc): It defaults to var/auto diff.  LBRY seemed to connect and mine fine, and I have had a solid connection to X11evo with appropriate hashrates.

Did you by chance happen to normalize ALL of the values? (including the ones I left commented)  If so ill make a post/link on my batch post.

Also I suggest looking at V0.1.0 through the link in my sig.  Closer to what you are doing, and the new format if interested =)

[orionpaxx12]

Can i ask for a little help, i am mining at 1.7mh/s on the neoscrypt port at 1300w, how do i go about calculating to find out if this is going to be profitable, thanks in advance

at profitability of 4.92019 mbtc per mh a day divide that by 1k then multiply by your hashrate 0.00492019x1.7= profit

@ 1300w what are you mining with I hope thats just your PSU rating, no profit unless your electricity charge is nearly free.

thanks i will do that, i have a CORSAIR RMx Series RM1000X 1000W 80 PLUS GOLD  and an old 700w psu its almost worthless i am running 3 r9 390x's/ 1 r9 280x toxic and 1 r7 370

my kilowatt per hour is .10$ cent so no its not to profitable i actually have a better psu coming, getting rid of the old 700w its going to be 80 PLUS GOLD so i hope that helps and i am switching to gtx 1070's

Yes the 1070s are a good choice for both performance and energy savings.

yeah i have be doing some research i am ordering my 1070's soon

[berron]

I  know that this info is in this thread, but I'm not able to find it. What's the recommended number of shares per minute?
Thanks

....

So my suggestion is to aim for a share return rate no higher than the highest difficulty that keeps you at 1% variance if you are setting a "minimum difficulty" or perhaps the value that keeps you under 1.2% for a fixed difficulty. This can be worked out easily if you know your hashrate without even testing it.

So our target is a diff that returns 20-25 shares per minute.
Every 71.6MH/s returns one share per minute - therefore every GH/s returns about 14 shares per minute.

A share return rate of 20 needs a diff of 1 per 1.432GH/s if setting a fixed difficulty.
A share return rate of 25 needs a diff of 1 per 1.79GH/s if setting a minimum difficulty.

...

TL:DR
Set your diff to your worker's hashrate in GH / 1.4

Do not use this method to calculate your difficulty for lbry.

Thanks Megaquake, ComputerGenie for your answer.

Interesting =)  Glad it seems to have a good effect.

I am curious as to what you are using ccminer.conf to contain?

Presently I am having no issues with manual diff settings.  If its a diff the stratum will not accept (fraction, etc): It defaults to var/auto diff.  LBRY seemed to connect and mine fine, and I have had a solid connection to X11evo with appropriate hashrates.

Did you by chance happen to normalize ALL of the values? (including the ones I left commented)  If so ill make a post/link on my batch post.

Also I suggest looking at V0.1.0 through the link in my sig.  Closer to what you are doing, and the new format if interested =)

Values are normalized for all the algos used in the scrypt. The ones left out, x13 to sib, are not normalized, where calculated some time before with scrypt algo value as normalizing algo and with a aggresive setting of Afterburner. When I did the second normalization to adapt to no Afterburner (not good in the 30ºC Spanish summer) adn with the new stratum addresses I don't recalculate them. I will do in the next weeks,feel free to ask for them if you are interested.

It'a a very simple conf file to change some standart settings to values I fell more confortable with and give a little more priority to cpu.

{
        "no-color" : true,
   "timeout" : 30,
   "statsavg" : 60,
   "cpu-priority" : 3
}

On the other hand, problem with diff continues I will take a more close look to this when I have a bit more time.

[crackfoo]

Port redirects for SHA256/X11/SCRYPT are no longer active. Make sure you've updated your miners to be using the proper hosts.

Cheers

[H4gb4rd]

My miners can not connect to your pool since hours.
They use the correct ports and no changes were made.
What is up?
Pity, I have to use another pool unitil you have fixed the problem...

[JaredKaragen]

My miners can not connect to your pool since hours.
They use the correct ports and no changes were made.
What is up?
Pity, I have to use another pool unitil you have fixed the problem...

Read main site:
Sha256.mine.zpool.ca..... Etc