Bitcoin Forum
May 04, 2024, 07:24:45 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Warning: One or more bitcointalk.org users have reported that they strongly believe that the creator of this topic is a scammer. (Login to see the detailed trust ratings.) While the bitcointalk.org administration does not verify such claims, you should proceed with extreme caution.
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 [52]
  Print  
Author Topic: [ANN] Technobit HEX8A1 -240 GHs Coincraft A1 board- Finished production  (Read 72420 times)
gcube1305
Full Member
***
Offline Offline

Activity: 155
Merit: 100


View Profile
February 22, 2015, 12:33:11 PM
 #1021

Hi all,

I have a problem with an HEX8A1 board.

I have two HEX8A1 boards. I have change the fans since it was way too noisy, and i use a 220/920 setting. The two boards are linked to a TPlink router with openwrt ("OpenWrt Barrier Breaker r40295", i think it is a 0.3.0) through an USB hub. All (tplink and boards, hub is not externally powered) are powered with the same Corsair CX760.

This was working like a charm for the last 6 months. But since two days now, one of the board is not hashing anymore.

Everything looks fine, the board is seen by cgminer, when i plug/unplug it i can see the board disappearing/reappearing, but the hashrate is always 0. The second board is working and hashing. The led are the same on the two boards.

I have tried to plug only one board, i have tried 210/860, i have change the usb port, i have plug the faultly board directly to the TPlink, i have reset settings to 260/1000, but nothing worked.

I don't think it is a overheat problem, cause the fans are identicall on the two boards, and with those fans and settings the boards seems cooler than with the noisy sunon and 260/1000 settings (i can put my finger on the it for more than 10s Wink). Moreover, i have a very very low error rate, and i did not change anything on the configuration for the last 6 months (and the room is at 18°).

Any idea ?
How can i see if it is a overheat problem ?



Seem like hardware problem. Try to let the board cool down for few hours, check if there is any hardware burn mark. Then try again. Then please post cgminer api log.

I have unplug the board last night, and replug it this morning, without any result. The board is not hot at all. There is absolutely no burn mark on the board.

Here is the CGMiner API log (a few minutes after a restart of tplink) (for information, error rate is 0 because of tplink reboot; after many hours i have never seen error rate over 0.1%, most of the times it is between 0.01 and 0.08) :

Code:
[Firmware Version] => 20140328
cgminer: 4_1_0_afb9743
Reply was 'STATUS=S,When=1424607810,Code=70,Msg=CGMiner stats,Description=cgminer 4.2.1|STATS=0,ID=HEX80,Enabled=Y,Status=Alive,Elapsed=510,MHS 5s=262.5G,MHS av=238.2G,Hardware Errors=0,Hardware Errors%=0.0000,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Last Share Time=1424607807,Chip Count=8,Frequency=220,Core Voltage=920,PIC Voltage Readings=930,Chip1 Nonces=34,Chip1 Engines=30,Chip1 Dupes=0,Chip2 Nonces=25,Chip2 Engines=32,Chip2 Dupes=0,Chip3 Nonces=25,Chip3 Engines=32,Chip3 Dupes=0,Chip4 Nonces=27,Chip4 Engines=32,Chip4 Dupes=0,Chip5 Nonces=25,Chip5 Engines=32,Chip5 Dupes=0,Chip6 Nonces=33,Chip6 Engines=32,Chip6 Dupes=0,Chip7 Nonces=26,Chip7 Engines=32,Chip7 Dupes=0,Chip8 Nonces=26,Chip8 Engines=32,Chip8 Dupes=0|STATS=1,ID=HEX81,Enabled=Y,Status=Alive,Elapsed=510,MHS 5s=0.000,MHS av=0.000,Hardware Errors=0,Hardware Errors%=0.0000,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Last Share Time=0,Chip Count=8,Frequency=220,Core Voltage=920,PIC Voltage Readings=800,Chip1 Nonces=0,Chip1 Engines=0,Chip1 Dupes=0,Chip2 Nonces=0,Chip2 Engines=0,Chip2 Dupes=0,Chip3 Nonces=0,Chip3 Engines=0,Chip3 Dupes=0,Chip4 Nonces=0,Chip4 Engines=0,Chip4 Dupes=0,Chip5 Nonces=0,Chip5 Engines=0,Chip5 Dupes=0,Chip6 Nonces=0,Chip6 Engines=0,Chip6 Dupes=0,Chip7 Nonces=0,Chip7 Engines=0,Chip7 Dupes=0,Chip8 Nonces=0,Chip8 Engines=0,Chip8 Dupes=0|STATS=2,ID=POOL0,Elapsed=510,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=128.00000000,Min Diff=128.00000000,Max Diff=128.00000000,Min Diff Count=398,Max Diff Count=398,Times Sent=223,Bytes Sent=26248,Times Recv=246,Bytes Recv=30822,Net Bytes Sent=26248,Net Bytes Recv=30822|STATS=3,ID=POOL1,Elapsed=510,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=0,Bytes Sent=0,Times Recv=0,Bytes Recv=0,Net Bytes Sent=0,Net Bytes Recv=0|STATS=4,ID=POOL2,Elapsed=510,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=0,Bytes Sent=0,Times Recv=0,Bytes Recv=0,Net Bytes Sent=0,Net Bytes Recv=0|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1424607810
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.2.1
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => HEX80
   [Enabled] => Y
   [Status] => Alive
   [Elapsed] => 510
   [MHS 5s] => 262.5G
   [MHS av] => 238.2G
   [Hardware Errors] => 0
   [Hardware Errors%] => 0.0000
   [USB Read Errors] => 0
   [USB Write Errors] => 0
   [USB Reset Count] => 0
   [Last Share Time] => 1424607807
   [Chip Count] => 8
   [Frequency] => 220
   [Core Voltage] => 920
   [PIC Voltage Readings] => 930
   [Chip1 Nonces] => 34
   [Chip1 Engines] => 30
   [Chip1 Dupes] => 0
   [Chip2 Nonces] => 25
   [Chip2 Engines] => 32
   [Chip2 Dupes] => 0
   [Chip3 Nonces] => 25
   [Chip3 Engines] => 32
   [Chip3 Dupes] => 0
   [Chip4 Nonces] => 27
   [Chip4 Engines] => 32
   [Chip4 Dupes] => 0
   [Chip5 Nonces] => 25
   [Chip5 Engines] => 32
   [Chip5 Dupes] => 0
   [Chip6 Nonces] => 33
   [Chip6 Engines] => 32
   [Chip6 Dupes] => 0
   [Chip7 Nonces] => 26
   [Chip7 Engines] => 32
   [Chip7 Dupes] => 0
   [Chip8 Nonces] => 26
   [Chip8 Engines] => 32
   [Chip8 Dupes] => 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => HEX81
   [Enabled] => Y
   [Status] => Alive
   [Elapsed] => 510
   [MHS 5s] => 0.000
   [MHS av] => 0.000
   [Hardware Errors] => 0
   [Hardware Errors%] => 0.0000
   [USB Read Errors] => 0
   [USB Write Errors] => 0
   [USB Reset Count] => 0
   [Last Share Time] => 0
   [Chip Count] => 8
   [Frequency] => 220
   [Core Voltage] => 920
   [PIC Voltage Readings] => 800
   [Chip1 Nonces] => 0
   [Chip1 Engines] => 0
   [Chip1 Dupes] => 0
   [Chip2 Nonces] => 0
   [Chip2 Engines] => 0
   [Chip2 Dupes] => 0
   [Chip3 Nonces] => 0
   [Chip3 Engines] => 0
   [Chip3 Dupes] => 0
   [Chip4 Nonces] => 0
   [Chip4 Engines] => 0
   [Chip4 Dupes] => 0
   [Chip5 Nonces] => 0
   [Chip5 Engines] => 0
   [Chip5 Dupes] => 0
   [Chip6 Nonces] => 0
   [Chip6 Engines] => 0
   [Chip6 Dupes] => 0
   [Chip7 Nonces] => 0
   [Chip7 Engines] => 0
   [Chip7 Dupes] => 0
   [Chip8 Nonces] => 0
   [Chip8 Engines] => 0
   [Chip8 Dupes] => 0
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL0
   [Elapsed] => 510
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 128.00000000
   [Min Diff] => 128.00000000
   [Max Diff] => 128.00000000
   [Min Diff Count] => 398
   [Max Diff Count] => 398
   [Times Sent] => 223
   [Bytes Sent] => 26248
   [Times Recv] => 246
   [Bytes Recv] => 30822
   [Net Bytes Sent] => 26248
   [Net Bytes Recv] => 30822
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL1
   [Elapsed] => 510
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 0
   [Bytes Sent] => 0
   [Times Recv] => 0
   [Bytes Recv] => 0
   [Net Bytes Sent] => 0
   [Net Bytes Recv] => 0
)
[STATS4] =>
(
   [STATS] => 4
   [ID] => POOL2
   [Elapsed] => 510
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 0
   [Bytes Sent] => 0
   [Times Recv] => 0
   [Bytes Recv] => 0
   [Net Bytes Sent] => 0
   [Net Bytes Recv] => 0
)
[/code]


What is strange to me is the PICVoltage that is always 800 for the faulty board (i can see this with putty and cgminer output too ...). This let me think of a power problem, this is why i have tried with only the faulty board, without any success.
1714850685
Hero Member
*
Offline Offline

Posts: 1714850685

View Profile Personal Message (Offline)

Ignore
1714850685
Reply with quote  #2

1714850685
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1714850685
Hero Member
*
Offline Offline

Posts: 1714850685

View Profile Personal Message (Offline)

Ignore
1714850685
Reply with quote  #2

1714850685
Report to moderator
1714850685
Hero Member
*
Offline Offline

Posts: 1714850685

View Profile Personal Message (Offline)

Ignore
1714850685
Reply with quote  #2

1714850685
Report to moderator
1714850685
Hero Member
*
Offline Offline

Posts: 1714850685

View Profile Personal Message (Offline)

Ignore
1714850685
Reply with quote  #2

1714850685
Report to moderator
loshia
Legendary
*
Offline Offline

Activity: 1610
Merit: 1000


View Profile
February 22, 2015, 03:27:11 PM
Last edit: February 22, 2015, 03:52:01 PM by loshia
 #1022

The voltage is read through usb when nonce comes
As long as board is not hashing nonces get recived va usb.it will stay constant...that is the answer.

Please help the Led Boy aka Bicknellski to make us a nice Christmas led tree and pay WASP membership fee here:
https://bitcointalk.org/index.php?topic=643999.msg7191563#msg7191563
And remember Bicknellski is not collecting money from community;D
Zich
Legendary
*
Offline Offline

Activity: 1190
Merit: 1000


View Profile WWW
February 22, 2015, 11:27:33 PM
 #1023

...........................

I have unplug the board last night, and replug it this morning, without any result. The board is not hot at all. There is absolutely no burn mark on the board.

Here is the CGMiner API log (a few minutes after a restart of tplink) (for information, error rate is 0 because of tplink reboot; after many hours i have never seen error rate over 0.1%, most of the times it is between 0.01 and 0.08) :

..............

Try change the frequency to 230 or 240 & the voltage to 1000. If the board still not hashing, then that board is ruined.
gcube1305
Full Member
***
Offline Offline

Activity: 155
Merit: 100


View Profile
February 22, 2015, 11:43:19 PM
 #1024

...........................

I have unplug the board last night, and replug it this morning, without any result. The board is not hot at all. There is absolutely no burn mark on the board.

Here is the CGMiner API log (a few minutes after a restart of tplink) (for information, error rate is 0 because of tplink reboot; after many hours i have never seen error rate over 0.1%, most of the times it is between 0.01 and 0.08) :

..............

Try change the frequency to 230 or 240 & the voltage to 1000. If the board still not hashing, then that board is ruined.

Still not hashing at 230/1000 and 240/1000...

Is it possible that only one A1 chip is dead ? In this case, maybe i can still use it with the good chip mask.
gcube1305
Full Member
***
Offline Offline

Activity: 155
Merit: 100


View Profile
February 22, 2015, 11:45:22 PM
 #1025

...........................

I have unplug the board last night, and replug it this morning, without any result. The board is not hot at all. There is absolutely no burn mark on the board.

Here is the CGMiner API log (a few minutes after a restart of tplink) (for information, error rate is 0 because of tplink reboot; after many hours i have never seen error rate over 0.1%, most of the times it is between 0.01 and 0.08) :

..............

Try change the frequency to 230 or 240 & the voltage to 1000. If the board still not hashing, then that board is ruined.

I have just realized that this board has been hashing for one year exactly (first hash on feb 21, 2014, last hash on feb 21, 2015)... strange coincidence...
Zich
Legendary
*
Offline Offline

Activity: 1190
Merit: 1000


View Profile WWW
February 22, 2015, 11:49:55 PM
 #1026

...........................

I have unplug the board last night, and replug it this morning, without any result. The board is not hot at all. There is absolutely no burn mark on the board.

Here is the CGMiner API log (a few minutes after a restart of tplink) (for information, error rate is 0 because of tplink reboot; after many hours i have never seen error rate over 0.1%, most of the times it is between 0.01 and 0.08) :

..............

Try change the frequency to 230 or 240 & the voltage to 1000. If the board still not hashing, then that board is ruined.

Still not hashing at 230/1000 and 240/1000...

Is it possible that only one A1 chip is dead ? In this case, maybe i can still use it with the good chip mask.

From your first cgminer api log, all chip is not hashing. So chips mask not gonna work.
gcube1305
Full Member
***
Offline Offline

Activity: 155
Merit: 100


View Profile
February 22, 2015, 11:59:30 PM
 #1027

...........................

I have unplug the board last night, and replug it this morning, without any result. The board is not hot at all. There is absolutely no burn mark on the board.

Here is the CGMiner API log (a few minutes after a restart of tplink) (for information, error rate is 0 because of tplink reboot; after many hours i have never seen error rate over 0.1%, most of the times it is between 0.01 and 0.08) :

..............

Try change the frequency to 230 or 240 & the voltage to 1000. If the board still not hashing, then that board is ruined.

Still not hashing at 230/1000 and 240/1000...

Is it possible that only one A1 chip is dead ? In this case, maybe i can still use it with the good chip mask.

From your first cgminer api log, all chip is not hashing. So chips mask not gonna work.

You're right...
Maybe it is just a little transistor or resistor, i will try to identify it, but i have'nt seen any burn mark on the board.

Is marto74 offering a kind of warranty on this ? Cheesy

Zich
Legendary
*
Offline Offline

Activity: 1190
Merit: 1000


View Profile WWW
February 23, 2015, 12:07:07 AM
 #1028

...........

You're right...
Maybe it is just a little transistor or resistor, i will try to identify it, but i have'nt seen any burn mark on the board.

Is marto74 offering a kind of warranty on this ? Cheesy



There is warranty, but i am not sure how long the warranty period  Cheesy
PMB
Member
**
Offline Offline

Activity: 109
Merit: 10


View Profile
December 11, 2015, 12:18:42 AM
 #1029


You're right...
Maybe it is just a little transistor or resistor, i will try to identify it, but i have'nt seen any burn mark on the board.

Is marto74 offering a kind of warranty on this ? Cheesy




Hi,

I have a similar problem, the board doesn't hash at all it is recognized in cgminer but it does not POWER UP. The fans do not work at all... Is there a fuse of some kind that I can replace? marto74 is awol so no use asking him for help...

I don't see any burn marks on my board also...

regards,

P.
Mitak
Full Member
***
Offline Offline

Activity: 126
Merit: 100


View Profile
December 17, 2015, 10:08:56 PM
 #1030

Try removing the fuse
the diode type component soldered on the PCI-e connector.
Just cut it out, if this is not helping , then you have to trow/RMa the board
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 [52]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!