[ANN] Neutron Crypto Coin Project (NTRN) Version 4.1.2 available now.

[bitmaster1x]

Received this today:

Poloniex Exchange <poloneixexchange@gmail.com>

Definitely fake. Email addy is a dead give-away.

[Gleb Gamow]

Received this today:

Poloniex Exchange <poloneixexchange@gmail.com>
8:52 AM (14 hours ago)

to info
Hi,

I am Busoni admin of Polo Exchange,

On May 2nd we are de-listing coins from the exchange.

We have been reading through your thread and are wondering if you would like to be added to our exchange. We feel we could bring a lot of attention to your project from our customer base.

We currently offer:

Coin addition: 1 BTC
Holding of ICO: 2 BTC

Please let us know how you feel of our offer,

Regards
Tristan D' agosta

...

Im thinking this is a fraud attempt.

Anyone know this cat?

I received the exact same email, so I sent the cat 1 BTC.  Hey, I wonder is Chantha Owen Lueung is the lead cat behind this obvious scam.

[puremage111]

have 0 active connection

What should i do?

Thanks

[puremage111]

have 0 active connection

What should i do?

Thanks

look around

https://www.cryptopia.co.nz/CoinInfo/?coin=NTRN

How can i add?

I saw those nodes, i try enter in the debug console window

It shows me :
21:27:21

Method not found (code -32601)

[puremage111]

have 0 active connection

What should i do?

Thanks

look around

https://www.cryptopia.co.nz/CoinInfo/?coin=NTRN

How can i add?

I saw those nodes, i try enter in the debug console window

It shows me :
21:27:21

Method not found (code -32601)

in conf file (Neutron.conf)

Search in both installed folder and appdata folder, doesn't have the .conf there ;/

[puremage111]

have 0 active connection

What should i do?

Thanks

look around

https://www.cryptopia.co.nz/CoinInfo/?coin=NTRN

How can i add?

I saw those nodes, i try enter in the debug console window

It shows me :
21:27:21

Method not found (code -32601)

in conf file (Neutron.conf)

Search in both installed folder and appdata folder, doesn't have the .conf there ;/

close wallet/daemon
in NTRN's appdata folder where wallet.dat located create text file Neutron.conf,
(precisely Neutron.conf, not Neutron.txt or Neutron.conf.txt, ...)
with this content:

listen=1
addnode=188.77.220.250:32001
addnode=86.46.54.198:32001
addnode=74.118.192.18:32001
addnode=85.236.191.153:32001
addnode=62.109.23.145:32001
addnode=82.146.40.21:32001
addnode=81.177.26.193:32001
addnode=85.172.60.17:32001
addnode=85.175.216.200:32001

start wallet

Holy, thanks alot, will try that later, guess this should work. Appreciate your hardwork!

[kronos123]

Please I'm not very good with PC and configurations. Where can I find information or a useful guide to making a masternode. For me it is better to have a video guide.
Please post how to do more mastero on a PC? Where can I see how many masternode are now active and how much do you earn a day with an MN?
Thank you

[Stanks]

Hello folks,

Can someone tell me why the neutron-qt doesnt recognize the masternode.conf? My masternode.conf is there with the following information:
Alias IP:9999 Masternode Privkey Masternode output Masternode index
But when I type "masternode list-conf" in the console it gives me just an empty message like the masternode.conf isnt there or like its empty...

18:19:25

masternode list-conf


18:19:25

{
}

Thank you!

[Stanks]

Hello folks,

Can someone tell me why the neutron-qt doesnt recognize the masternode.conf? My masternode.conf is there with the following information:
Alias IP:9999 Masternode Privkey Masternode output Masternode index
But when I type "masternode list-conf" in the console it gives me just an empty message like the masternode.conf isnt there or like its empty...

https://bitcointalk.org/index.php?topic=1037272.msg11435503#msg11435503

This is local setting for 1 MN, I want to setup more then 1 and not on my local machine but on different plans and therefor "masternode=1" is not needed in the neutron.conf but masternode.conf is needed for multiple MNs and the QT seem to not see/read the masternode.conf in the roaming folder.
Also to start MNs from the masternode.conf you need to run "masternode start-many" for all at once or "masternode start-alias ALIAS"... works fine for all other coins but not for NTRN. When I type "masternode start-alias MN1" I get:

19:02:39

{
"alias" : "MN1",
"result" : "failed",
"errorMessage" : "could not find alias in config. Verify with list-conf."
}

Could not find means the QT doesnt see/read the masternode.conf but WHY? Its there and its not empty and yes its masternode.conf not masternode.conf.txt

[Stanks]

Could not find means the QT doesnt see/read the masternode.conf but WHY? Its there and its not empty and yes its masternode.conf not masternode.conf.txt

BECAUSE it's not there in ntrn, it uses only a portion of darkcoin mn system.
i wrote already before that ntrn mnodes is bullshit,
i could run em only as separate wallets, and operate thru rpc and custom scripts.
all that crap was made for hype only, profit-wise simple staking wallet is better

Ok I see. What a crap... There is much more to take out of NTRN but the devs need seriously start to develop it...
Look at all the other MNs where everything works well they all have at least 1MIO cap if we want to reach similar results some revision is definitely necessary.

Cheers!

[puremage111]

For coins that is deposited into the Mnode address

Let's say i wanted to stop my masternode

Is it withdrawable?

Thanks

[Stanks]

For coins that is deposited into the Mnode address

Let's say i wanted to stop my masternode

Is it withdrawable?

Thanks

Of course it is. You can stop your MN and sell your 25000 NTRN anytime.

But currently it only makes sense to run MNs if you only got one or if you operate multiple from different directories (Neutron1, Neutron2 etc..) but its not how a MN operates usually. For now Im just staking and will follow the development.

Cheers!

[puremage111]

For coins that is deposited into the Mnode address

Let's say i wanted to stop my masternode

Is it withdrawable?

Thanks

Of course it is. You can stop your MN and sell your 25000 NTRN anytime.

But currently it only makes sense to run MNs if you only got one or if you operate multiple from different directories (Neutron1, Neutron2 etc..) but its not how a MN operates usually. For now Im just staking and will follow the development.

Cheers!

1)Do we have slacks for this group?


2)Lets say i create a masternode, sent 25K collateral to the Mnode address, with X IP.
But after i reset my modem, my ip changed, what should i do now?
Thanks

[Stanks]

For coins that is deposited into the Mnode address

Let's say i wanted to stop my masternode

Is it withdrawable?

Thanks

Of course it is. You can stop your MN and sell your 25000 NTRN anytime.

But currently it only makes sense to run MNs if you only got one or if you operate multiple from different directories (Neutron1, Neutron2 etc..) but its not how a MN operates usually. For now Im just staking and will follow the development.

Cheers!

1)Do we have slacks for this group?


2)Lets say i create a masternode, sent 25K collateral to the Mnode address, with X IP.
But after i reset my modem, my ip changed, what should i do now?
Thanks

Change the IP in the .conf to the actual IP, restart your wallet and start the MN again.

No slack yet but the dev told me it would be a nice idea.

[puremage111]

Need some Mnode Guide

I followed the one on

https://www.cryptopia.co.nz/Forum/Thread/568?postId=3681

Problems i get
1) Could not vin allocate collateral address

Staking is =0 on both masternode and neutron.conf
Tried setup again a new masternode with new collateral address
Payment confirmed
Firewall is offed

Steps i perform
Before i start - I disabled the firewall
1) Create allias
2) Add IP:Port [ The IP i get it from "Whats my ip address" then the port i follow on the guide which shows :9999
3) Then i added this command "Staking=0" in  both masternode.conf and neutron.conf
4) Then i copy the config file and paste it into my masternode.conf file
5) I simply key in the username/password with random characters, port with 9999, then  IP:Port
6) Sent 25001 to the collateral address from the nuclues MN that i created
7) Wait for 10 confirmation, still having the "could not vin allocate collateral address"
I tried resend the 25001 from the same collateral address, but still it shows "could not vin allocate collateral address"



What is the error here?

thanks

[Stanks]

Need some Mnode Guide

I followed the one on

https://www.cryptopia.co.nz/Forum/Thread/568?postId=3681

Problems i get
1) Could not vin allocate collateral address

Staking is =0 on both masternode and neutron.conf
Tried setup again a new masternode with new collateral address
Payment confirmed
Firewall is offed

Steps i perform
Before i start - I disabled the firewall
1) Create allias
2) Add IP:Port [ The IP i get it from "Whats my ip address" then the port i follow on the guide which shows :9999
3) Then i added this command "Staking=0" in  both masternode.conf and neutron.conf
4) Then i copy the config file and paste it into my masternode.conf file
5) I simply key in the username/password with random characters, port with 9999, then  IP:Port
6) Sent 25001 to the collateral address from the nuclues MN that i created
7) Wait for 10 confirmation, still having the "could not vin allocate collateral address"
I tried resend the 25001 from the same collateral address, but still it shows "could not vin allocate collateral address"



What is the error here?

thanks

You dont need the masternode.conf since it doestn work for NTRN yet (I hope it will be changed with the next update). What you need is neutron.conf only and set up your MNs thru console its saver to know if you did everything right, the MN front client says often "successfully started" while in 90% of cases it doenst start anything.... but when the console tells you "masternode started successfully" then you can be sure it actually started.

Contact me on PIO slack and I will go thru it with you, its better to explain such things live.

Cheers!

[jchi18]

I just downloaded the wallet and noticed that there are 0 connections to the Neutron network.  How do I connect the windows wallet so that it can sync?

[audiotopix]

I just downloaded the wallet and noticed that there are 0 connections to the Neutron network.  How do I connect the windows wallet so that it can sync?

Create a .conf file in your Neutron folder that is located in %appdata% use the addnodes list that is found in the OP,

To create a .conf just open notepad, cut and paste the addnodes list into your notepad, then save as all file types, make sure you check the little box,,

name it neutron.conf,, drop your newly created .conf file in the neutron folder located in %appdata%,, once you've done that restart your wallet and give it a few minutes to connect and start to sync up.

[jchi18]

What little box do I check?

[puremage111]

Lets say i have 5 address in my receive wallet

I wanted to generate private key of each 5 of the address

What can i do?