[ANN] Neutron Crypto Coin Project (NTRN) Version 4.1.2 available now.

[cedlemercier]

I started staking with 25.000 Neutrons.
I get about 20 Neutrons a day.
How much does a masternode get? Is it better to run a masternode?

With masternode, it's better i have 70-80 neutrons per days.

[polylogic]

I started staking with 25.000 Neutrons.
I get about 20 Neutrons a day.
How much does a masternode get? Is it better to run a masternode?

let me know if you have no problem starting the node.


i tried to load the blockchain from cryptochainer.com but the wallet just ignorged it and still loads the chain normal.
with one exeption: blk0001.dat seems to be bigger than usual xD

[cedlemercier]

I started staking with 25.000 Neutrons.
I get about 20 Neutrons a day.
How much does a masternode get? Is it better to run a masternode?

let me know if you have no problem starting the node.


i tried to load the blockchain from cryptochainer.com but the wallet just ignorged it and still loads the chain normal.
with one exeption: blk0001.dat seems to be bigger than usual xD

Yes, neutron wallet is long to start and is instable on my WINDOWS.
But rewards come every days.
Return of investissement is very good
I hope à update wallet soon, i think wallet need update

[Paltus]

thanks for trying to help.
this is really frustrating. i tried all that and im sure i do everything right.
i mean, what can you do wrong, send 25k to masternode-tab generated address
maybe its because of windows 8.

you need staking=0 in neutron.conf to disable staking
it wont get disabled in masternode.conf only.
i figures that out when i was trying to run without neutron.conf

i renamed the folder and started from scatch (with old blockchain)
i noticed the configuration like advanced coin control was still activated.
maybe it gets saved in windows registry?
where does the masternode "config" with txid and idx, the vin gets saved?

now i try the same wallet in a different pc.
guess i should try reinstalling the vps

I have similar problem. Masternode worked. Then I updated to wallet 1.1.1, created Nucleus node, started it (Adrenaline node at ... started), but no more income.
Collateral address is ok, masternode key is ok, staking=0 in masternode.conf, but no rewards anymore.
What am I doing wrong ?

[polylogic]

thanks for trying to help.
this is really frustrating. i tried all that and im sure i do everything right.
i mean, what can you do wrong, send 25k to masternode-tab generated address
maybe its because of windows 8.

you need staking=0 in neutron.conf to disable staking
it wont get disabled in masternode.conf only.
i figures that out when i was trying to run without neutron.conf

i renamed the folder and started from scatch (with old blockchain)
i noticed the configuration like advanced coin control was still activated.
maybe it gets saved in windows registry?
where does the masternode "config" with txid and idx, the vin gets saved?

now i try the same wallet in a different pc.
guess i should try reinstalling the vps

I have similar problem. Masternode worked. Then I updated to wallet 1.1.1, created Nucleus node, started it (Adrenaline node at ... started), but no more income.
Collateral address is ok, masternode key is ok, staking=0 in masternode.conf, but no rewards anymore.
What am I doing wrong ?

at least your node is starting. my wont start. like there is no money in the bank. but it is  

i think you have to wait a little more. how long did you wait? give it 24-48h or even 72h.
if you didnt get paid by then then something is messed up.

do you guys wait the 10 confirmations of the 0.01 Fee and then start?
i think my vin is incorrect. the error message pops up like it already knew it was wrong.
i removed the config (be carefull, all nodes get deleted), tried a couple more times on the same pc. no vin allocation.
i try a 3rd computer.

i saw that xcxt masternodes uses the same config system (is it from pivx?) but they dont use the masternode.conf, everything gets set in "coinname".conf
i already spend 0.5 NTRN on fees to send from x to Y and back again, i make you guys rich :p

actualy the situation is kinda messed up und very unpleasant for newcomers or people that may want to join the train before it gets too fast.
nobody want to buy the coin if the tec is not working

on a sidenote: with maxconnections limited and staking only the wallet doesnt freeze.

[TheKingInYellow]

I had a headache setting up the MN as well and was told it will be much more streamlined in the next wallet release. I stake my coins pending then.

[polylogic]

I had a headache setting up the MN as well and was told it will be much more streamlined in the next wallet release. I stake my coins pending then.

yeah but staking is only 1/3 of the reward.
so instead of $6 we only get $2,
it still pays the server but masternode should work.
i dont see why it doesnt.

i am tempted to grab a node from here

but i kinda doub that it does work!???

on my very first try i tried to setup the node with coldwallet.
it doesnt work as you have to use the qt wallet to setup the node and allocate the VIN

i wonder how they can use their server with my coldwallet only by using the tx.
why would they sell it if it doesnt work?

its even cheaper than my current vps so it should be a win/win..
ill email them...

but it should work like other masternodes, so i may try it again with the linux vps.
neutron.conf with

Code:

<alias><ip:port><masternodekey><txid><idx>

one last blink of hope, do i have to send exatly 25000.000000 so the VIN get allocated correctly?
i always send more so i can cover the fee of the next try.
i should try one tx with exactly 25k


OMG IT STARTED°!!^^

exatcly 25k tx and unlocked for staking did the trick.


Nodeshare.in was very clear in their tutorial, thanks for that.
unlock for staking i got from you and
still i would like the linux server and write a tutorial for it

now that i see it the original tutorial first says 25001 and in second 25000
i feel stupid, wasted 3 days for this lol   dont judge me 

[greenhope]

I started fresh with new wallet and address and staking.
I received 20.xxx coins and all confirmed but the actual numbers are around 7.
Is it normal?

[pwpwpw]

There is a bug in the client, when you're getting a masternode reward, it shows the input of the stake so it can be from 10 coins to 100k coins, the reward itself is about 14 and the same for staking, actual reward is 7~ish. When you restart the client after getting the rewards, you will see the real value. It's just a visual bug.

[greenhope]

Thanks.

We need a better wallet so bad.
It is hogging 470M+ ram and constant freezing for scanning masternodes, which staking wallets doesn't need.

[polylogic]

There is a bug in the client, when you're getting a masternode reward, it shows the input of the stake so it can be from 10 coins to 100k coins, the reward itself is about 14 and the same for staking, actual reward is 7~ish. When you restart the client after getting the rewards, you will see the real value. It's just a visual bug.

yeah i was just wondering about that
+113 NTRN received, only 13 in my wallet, masternode offline
and i couldnt select the collateral in coin inputs, got me worried for a minute xD
restarting takes 5 minutes. i hope i wont have to do this everytime.


also i think the wallet needs to stay unlocked for staking for masternode to work, can somebody confirm?

[BTC-BTC-BTC]

There is a bug in the client, when you're getting a masternode reward, it shows the input of the stake so it can be from 10 coins to 100k coins, the reward itself is about 14 and the same for staking, actual reward is 7~ish. When you restart the client after getting the rewards, you will see the real value. It's just a visual bug.

yeah i was just wondering about that
+113 NTRN received, only 13 in my wallet, masternode offline
and i couldnt select the collateral in coin inputs, got me worried for a minute xD
restarting takes 5 minutes. i hope i wont have to do this everytime.


also i think the wallet needs to stay unlocked for staking for masternode to work, can somebody confirm?

You need to unlock or unlock to stake to start your masternode. You should get a massage like masternode successful started.

[polylogic]

There is a bug in the client, when you're getting a masternode reward, it shows the input of the stake so it can be from 10 coins to 100k coins, the reward itself is about 14 and the same for staking, actual reward is 7~ish. When you restart the client after getting the rewards, you will see the real value. It's just a visual bug.

yeah i was just wondering about that
+113 NTRN received, only 13 in my wallet, masternode offline
and i couldnt select the collateral in coin inputs, got me worried for a minute xD
restarting takes 5 minutes. i hope i wont have to do this everytime.


also i think the wallet needs to stay unlocked for staking for masternode to work, can somebody confirm?

You need to unlock or unlock to stake to start your masternode. You should get a massage like masternode successful started.

yes but also you cannot lock your wallet after you start your server ? i feel like the server stopped because i locked the wallet.
this brings me to the next problem:

- ntrn.masternodes.pro reports the server as Offline after a couple of hours
- my masternode tab in wallet doesnt say status
- all masternode tab shows the server as active with time. (still increasing)

which one is right. ill go with all masternode tab for now.
but i really need to get linux node started asap

[TimC]

I started fresh with new wallet and address and staking.
I received 20.xxx coins and all confirmed but the actual numbers are around 7.
Is it normal?

i wanted to ask the same question ... i dont get it why thats works that way ....

What you are seeing is a display flaw/errror since it is showing you all of the coins in that transaction. The amount you stake is a fixed amount

PoS Reward: 30 NTRN shared - Client / Nucleus Node (halving every 1m blocks)

So right now the reward is 15 NTRN shared - Client / Nucleus Node so the staking computer get 7 NTRN and the master node get 7 NTRN

[polylogic]

how to disable logfile in config?
on my winvps the log has reached 5gb in one day.
too much  

looks like one of these does the trick:

debug=0
log=0

also i havent been paid for 36h .. something is off...

[frostminer]

how to disable logfile in config?
on my winvps the log has reached 5gb in one day.
too much  

looks like one of these does the trick:

debug=0
log=0

also i havent been paid for 36h .. something is off...

I was just about to post the same.
debug.log is swamping the machine with 5-7 gb  daily.

[NetTime]

go in debug.log
delete everything
save and exit
make debug.log read only
restart wallet

[frostminer]

how to disable logfile in config?
on my winvps the log has reached 5gb in one day.
too much  

looks like one of these does the trick:

debug=0
log=0

also i havent been paid for 36h .. something is off...

I was just about to post the same.
debug.log is swamping the machine with 5-7 gb  daily.

Hmm... also

masternode list-conf should list something?



masternode list-conf

{
}


Even tho the GUI says "started".
Also i suspect there is a reason for generating 5gb of log.

[greenhope]

Mine is running but goes offline in an hour.
It is running right now, confirmed on the wallet and masternodes.pro.
But the active time is 00:00, it doesn't change.
I got paid for masternode reward few times, but I still don't know how.
I did started from time to time from Necleus tab.

It is showing from the console.

masternode list-conf

{
}

masternode status

masternode <start|start-alias|start-many|stop|stop-alias|stop-many|list|list-conf|count|debug|current|winners|genkey|enforce|outputs> [passphrase]
(code -1)


masternode debug

No problems were found

[cedlemercier]

Neutron as good ROI, but wallet is instable on my windows, soon update ?