Deki1904
|
|
September 20, 2017, 10:42:21 PM |
|
Hi,
Have you guys ever think about to build a multi platform. Where you can easy chose the algorithm. And for amd also for Nvidia cards?
With a keeping update also for new incoming coins....
Because Ethereum mining is dying...... So maybe you should bring something alternative.
I would love it. Because I love ethos.
Cheers
|
|
|
|
JackJackson
Newbie
Offline
Activity: 3
Merit: 0
|
|
September 21, 2017, 01:09:38 AM |
|
i tried 1.2.5 with P106-6g on core and memclocks are better. on older configs i wrote 5500 mem clock for working on 4750 mem clock. now its working well it works what i write on config
Hi friend, show your config file for P106-6g with ethos 1.2.5 this is sort of my remote.conf ### Worker 48d485 // Asus H270Z mobo 6x Asus P106(v2) 4GB mem miner 48d485 ethminer cor 48d485 1250 1250 1250 1250 1250 1250 mem 48d485 4500 4500 4500 4500 4500 4500 fan 48d485 80 80 80 80 80 80 pwr 48d485 80 80 80 80 80 80 flg 48d485 --cl-local-work 256 --cl-global-work 8192 --farm-recheck 200 --cuda-parallel-hash 4 loc 48d485 P106v2_1
### Worker f45fb8 // Asrock TB250-BTC mobo 6x Asus P106 (v1) 8GB mem ### miner 48d485 ethminer cor f45fb8 1700 1700 1700 1700 1700 1700 mem f45fb8 5500 5500 5500 5500 5500 5500 fan f45fb8 80 80 80 80 80 80 pwr f45fb8 80 80 80 80 80 80 flg f45fb8 --cl-local-work 256 --cl-global-work 16387 --farm-recheck 200 --cuda-parallel-hash 4 loc f45fb8 P106v1_1 Worker 48d485 upgraded 1.2.5 4500 mem clock on config and works well on mem clock 4.5ghz (its fail on 4.75 i guess 4GB system memory not enough on this rig) Worker f45fb8 installed ethos 1.2.4 5500 mem clock on config but mem clock 4.75 ghz works. older versions i wrote 5500 mem clock on config but cards are running on 4750 mem clock realtime it fixed on 1.2.5 version Thanks a friend, these settings work fine!
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
September 21, 2017, 10:07:01 AM |
|
Hi guys, can I ask you for some help? Trying to configure my ethOS for ETC mining but I have some problem. This is my first time with ethOS. I'm mining ETC with Claymore 10 on Windows with this code based on info from my ETC pool: EthDcrMiner64.exe -epool 79.98.144.27:8008 -ewal MyETCWalletAddress -eworker rig1 -epsw x -esm 0 -allcoins 1 What should be the correct setup of local.conf and claymore.stub.conf files based on above code? Is this ok? local.conf file: globalminer claymore maxgputemp 65 globalcore 1150 globalmem 1200 globalfan 60 globalpowertune 5 stratumproxy enabled proxywallet 0x84cdd5f8e81164cc0f54ed4a502476c76d1e8b proxypool1 79.98.144.27:8008 flags --cl-global-work 8192 --farm-recheck 200 claymore.stub.conf: -epool pool1 -ewal wallet -eworker rig1 -epsw x -esm 0 -allcoins 1 Many thanks for any advise. you dont need to edit claymore.stub.conf only remote or local.conf is enough globalcore and globalmem values depends which gpus you have. i think its more comfortable to write them by each rig you can use loc parameter for eworker loc (rigcode) rigname Finally got my pool working with ethOS. Seems my setup has to be like below: local.conf file: maxgputemp 70 globalminer claymore autoreboot 2
#individual GPU overclocking (RX580) cor 49709f 1150 1150 1150 1150 1150 1150 1150 mem 49709f 2200 2200 2200 2200 2200 2200 2200 fan 49709f 60 60 60 60 60 60 60 pwr 49709f 4 4 4 4 4 4 4 vlt 49709f 900 900 900 900 900 900 900
claymore.stub.conf file: -epool 79.98.144.27:8008 -ewal 0x84cdd5f8e81164cc0f54ed4a502476c76d1e8b -eworker rig1 -epsw x -esm 0 -allcoins 1 -dbg -1 With this setup ethOS is working fine. Still not sure vlt parameter is working for RX580 GPU series.
|
|
|
|
Xexen4
|
|
September 21, 2017, 05:24:02 PM |
|
With this setup ethOS is working fine.
Still not sure vlt parameter is working for RX580 GPU series.
try with this vlt 49709f 1 1 1 1 1 if its work you can try 0.9 0.9
|
|
|
|
Futureblnr
|
|
September 21, 2017, 07:44:09 PM |
|
I have a question and can't find where to ask. Can I mine any altcoins just with my Mac?
|
|
|
|
kjs
|
|
September 22, 2017, 12:29:21 AM |
|
With this setup ethOS is working fine.
Still not sure vlt parameter is working for RX580 GPU series.
try with this vlt 49709f 1 1 1 1 1 if its work you can try 0.9 0.9 The voltage needs to be set in millivolts. So, to set 0.9 volts you would specify 900 instead. vlt 49709f 900 900 900 900 900 Most RX 470/480/570/580's should be able to run at 850 mv when mining ETH with the core clock set to 1150 mhz, hence set the config like this: cor 49709f 1150 1150 1150 1150 vlt 49709f 850 850 850 850 850
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
September 22, 2017, 06:51:51 AM |
|
Most RX 470/480/570/580's should be able to run at 850 mv when mining ETH with the core clock set to 1150 mhz, hence set the config like this: cor 49709f 1150 1150 1150 1150 vlt 49709f 850 850 850 850 850 My all RX580 GPUs have Hynix mem. I have stable 30.5MH/s but with vlt 900. Since 24 hours no freeze. With vlt 850 I got one freeze per 24H.
|
|
|
|
chem96
Full Member
Offline
Activity: 1330
Merit: 217
https://lifinity.io/
|
|
September 22, 2017, 10:58:05 AM |
|
Hi, Just few questions...
Q1: It’s possible to switch automatically between two conf? My Need: after 22:00 and until 06:00 I have 20% discount on electricity. I’ll use this time frame to power-up my rig. from globalpowertune 80 to globalpowertune 90.
Q2 : How to update my Nvidia drivers? It’s automatically updated with each new ethos release or should I do something manual?
Thank you in advance for any help
|
|
|
|
botarnold
Newbie
Offline
Activity: 53
Merit: 0
|
|
September 22, 2017, 12:25:14 PM |
|
The vlt function doesn't seem to work on RX580 cards. As the power draw from the wall did not change whether I tune 1100 to 900 and even 750. It just doesn't seem to applying my values.
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
September 22, 2017, 12:55:03 PM |
|
The vlt function doesn't seem to work on RX580 cards. As the power draw from the wall did not change whether I tune 1100 to 900 and even 750. It just doesn't seem to applying my values.
Yes, I can confirm the same for my RX580. Even I change vlt to 850 or 900, power drawn from the wall is the same. What is also strange for me, globalpowertune parameter seems to not work too. Even I set 5/6/7, dashboard shows ptune 4, also ethos-overclock shows 4.
|
|
|
|
nokati
|
|
September 22, 2017, 01:22:57 PM |
|
|
|
|
|
chem96
Full Member
Offline
Activity: 1330
Merit: 217
https://lifinity.io/
|
|
September 24, 2017, 07:36:23 AM |
|
Hi, Just few questions...
Q1: It’s possible to switch automatically between two conf? My Need: after 22:00 and until 06:00 I have 20% discount on electricity. I’ll use this time frame to power-up my rig. from globalpowertune 80 to globalpowertune 90.
Q2 : How to update my Nvidia drivers? It’s automatically updated with each new ethos release or should I do something manual?
Thank you in advance for any help
For my first question, I'll try to use Crontab to switch between two remote conf file. I'll post my result here if somebody is interested...
|
|
|
|
twofreckles
|
|
September 24, 2017, 08:39:06 AM |
|
How does this function work:
"-Added ability to set voltage for RX series GPUs."
I mean is this better than adding offset to vbios? Did someone checked if power consumption from the wall is lower/higher/same comparing to offset?
|
|
|
|
kjs
|
|
September 24, 2017, 09:28:46 AM |
|
How does this function work:
"-Added ability to set voltage for RX series GPUs."
I mean is this better than adding offset to vbios? Did someone checked if power consumption from the wall is lower/higher/same comparing to offset?
They have code to control the voltage regulator modules (there are several types and manufacturers) of the GPU's directly so they can set the voltage to the desired levels.
|
|
|
|
kjs
|
|
September 24, 2017, 09:30:37 AM |
|
Hi, Just few questions...
Q1: It’s possible to switch automatically between two conf? My Need: after 22:00 and until 06:00 I have 20% discount on electricity. I’ll use this time frame to power-up my rig. from globalpowertune 80 to globalpowertune 90.
Q2 : How to update my Nvidia drivers? It’s automatically updated with each new ethos release or should I do something manual?
Thank you in advance for any help
For my first question, I'll try to use Crontab to switch between two remote conf file. I'll post my result here if somebody is interested... That should work, just execute something like this from crontab within a script: minestop && <copy new config file to /home/ethos/local.conf && sudo ethos-overclock && minestart
|
|
|
|
twofreckles
|
|
September 24, 2017, 04:44:27 PM |
|
How does this function work:
"-Added ability to set voltage for RX series GPUs."
I mean is this better than adding offset to vbios? Did someone checked if power consumption from the wall is lower/higher/same comparing to offset?
They have code to control the voltage regulator modules (there are several types and manufacturers) of the GPU's directly so they can set the voltage to the desired levels. This doesnt answer my question. How is setting static voltage different to adding offset. Which solutions gives better results or maybe they can be mixed ...
|
|
|
|
chem96
Full Member
Offline
Activity: 1330
Merit: 217
https://lifinity.io/
|
|
September 24, 2017, 05:19:51 PM |
|
Hi, Just few questions...
Q1: It’s possible to switch automatically between two conf? My Need: after 22:00 and until 06:00 I have 20% discount on electricity. I’ll use this time frame to power-up my rig. from globalpowertune 80 to globalpowertune 90.
Q2 : How to update my Nvidia drivers? It’s automatically updated with each new ethos release or should I do something manual?
Thank you in advance for any help
For my first question, I'll try to use Crontab to switch between two remote conf file. I'll post my result here if somebody is interested... That should work, just execute something like this from crontab within a script: minestop && <copy new config file to /home/ethos/local.conf && sudo ethos-overclock && minestart @kjs: thank you for your suggestion and help. I'll try it.
|
|
|
|
redectro
Jr. Member
Offline
Activity: 51
Merit: 1
|
|
September 24, 2017, 05:24:44 PM |
|
Claymore works great with Awesome Miner as a monitor, Shows start hashing speed at max much faster than the ethos interface. I use both, Ethos rocks! So does Awesome Miner Monitor. Great stuff! Will keep updated.
|
|
|
|
chem96
Full Member
Offline
Activity: 1330
Merit: 217
https://lifinity.io/
|
|
September 24, 2017, 07:48:07 PM |
|
Hi, Just few questions...
Q1: It’s possible to switch automatically between two conf? My Need: after 22:00 and until 06:00 I have 20% discount on electricity. I’ll use this time frame to power-up my rig. from globalpowertune 80 to globalpowertune 90.
Q2 : How to update my Nvidia drivers? It’s automatically updated with each new ethos release or should I do something manual?
Thank you in advance for any help
For my first question, I'll try to use Crontab to switch between two remote conf file. I'll post my result here if somebody is interested... That should work, just execute something like this from crontab within a script: minestop && <copy new config file to /home/ethos/local.conf && sudo ethos-overclock && minestart @kjs: thank you for your suggestion and help. I'll try it. I created two directory “Day” ; “Night”. In each one I have put a file called “remote.conf” with the configmaker link I made. One with the parameter for the “day” and the second with the parameter for the “night” Then I wrote 4 entry in crontab (crontab -e) #Day config at 06:00 x 6 x x x cp /home/ethos/day/remote.conf home/ethos/remote.conf x 6 x x x sudo putconf && sudo ethos-overclock #Night config at 22:00 x 22 x x x cp /home/ethos/night/remote.conf home/ethos/remote.conf x 22 x x x sudo putconf && sudo ethos-overclock And…. Yeaaaa it works!!!!
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
September 25, 2017, 06:38:25 AM |
|
How does this function work:
"-Added ability to set voltage for RX series GPUs."
I mean is this better than adding offset to vbios? Did someone checked if power consumption from the wall is lower/higher/same comparing to offset?
They have code to control the voltage regulator modules (there are several types and manufacturers) of the GPU's directly so they can set the voltage to the desired levels. This definitely does not work for Sapphire Radeon Nitro+ RX580 8GB (11265-01-20G) with Hynix mem (A1726, A1727). My power drawn from the wall didn't change after I set vlt to 850, 875, 900. No change.
|
|
|
|
|