ethOS - Ethereum Mining Platform

[duniek]

is this possible use it on rotated screen (portrait mode)


also is it possible to zoom for full screen for only on cards hashing wihtout text mode etc

[marimach77]

Support amd mining driver please
http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx

ethOS team, any news regarding above?

[mr.pacy.mf]

hi I have problem with optiminer on ethos for mnx coin all rx cards working good but 280x 380 and 390x wont start with setings for rx cards ...can someone help me

globalminer optiminer-zcash

optiminer-zcash=proxywallet <wallet>.<worker>
optiminer-zcash=proxypool1 eu.minexpool.nl:3333
optiminer-zcash=poolpass1 x
optiminer-zcash=flags -a equihash96_5 --pci-mode 0 -i 192


this setings work ok with rx
problem in config or drivers for r9 series ?

[Kirilp]

Ethos retains international powerhouse law firm K&L Gates as counsel

Today we’re excited and honoured to announce Ethos has retained K&L Gates – a leading international law firm positioned at strategic intersections in the global economy – to provide essential legal services and guidance as Ethos embarks on its mission to unlock the New Economy on a global scale.K&L Gates is widely acclaimed as among the best and most trusted law firms on the planet, with deep global expertise and networks across many verticals including Securities, Banking and Capital Markets law. They are uniquely positioned to support Ethos in executing its vision with precision of delivering a healthier financial ecosystem for global consumers across every continent through an innovative investment platform that forever unifies the old and new economies with unique applications of blockchain, cryptocurrency and human-centred design technologies.
https://www.ethos.io/2017/12/11/ethos-kl/

[chem96]

Ethos retains international powerhouse law firm K&L Gates as counsel

Today we’re excited and honoured to announce Ethos has retained K&L Gates – a leading international law firm positioned at strategic intersections in the global economy – to provide essential legal services and guidance as Ethos embarks on its mission to unlock the New Economy on a global scale.K&L Gates is widely acclaimed as among the best and most trusted law firms on the planet, with deep global expertise and networks across many verticals including Securities, Banking and Capital Markets law. They are uniquely positioned to support Ethos in executing its vision with precision of delivering a healthier financial ecosystem for global consumers across every continent through an innovative investment platform that forever unifies the old and new economies with unique applications of blockchain, cryptocurrency and human-centred design technologies.
https://www.ethos.io/2017/12/11/ethos-kl/

I think this as nothing to do with ethOS. just a little bit confusing. the logo is approximatively the same

[bitmine0]

Also if I may, (if this thread isn't the place to ask for ethOS technical advice please let me know, but I am dying to ask for some help from the concentration on smartest people on the subject) - would anyone be willing to help me with the overclocking of two dissimilar AMD cards ( 1 4gb ellesmere rx 570 113-2e366fu-o53 elpida (edw4032babg) and 1 8gb ellesmere rx 480 113-d0090101-100 samsung (k4g80325fb) and I I'm only getting about 23.5 Mh/s. Other vitals posted in screenshot. https://ibb.co/dW8Oeb

I've attempted overclocking the cards independently and can't seem to single them out for their specific instructions (I've tried matching by BIOS, ect)

Could someone AMD familiar post me an example config to attempt. I feel like I'm not using these cards effectively.

Thank you so much if you're able to help.

I too am struggling with this. I've been googling for my gpu bios and then copying what other ethosdistro folks have done. For example, i'm running 7 -- rx 570 (113-57045EHB1-W90 Elpida)

I found this...

Code:

# FROM: http://lhmach.ethosdistro.com/?bios=yes 
# rig: loc: lhm200 -- 7a2a69 

#cor 113-57045EHB1-W90 1080 
#mem 113-57045EHB1-W90 1970 
#pwr 113-57045EHB1-W90 2 
#vlt 113-57045EHB1-W90 940 

I tried this out and I do get about 22.50 MH/s per card. Unfortunately, two of my seven cards are unstable at this setting and after about five minutes it starts going all over the place. I've checked and double checked power, risers, etc.... So I decided to tweak the per card settings. Now I'm using (lots of little experiments in here...)

Code:

cor myrig0  1080  1080  1080  1080  1110  1080  1110 
mem myrig0  1980  1980  1980  1980  1850  1980  1850 
pwr myrig0  2     2     2     2     2     2     2 
vlt myrig0  940   940   940   940   1050  940   1050 
fan myrig0  40    40    40    40    40    40    40 

which is a little more stable. I get about ~22.5 on five cards and ~21.0 on two cards. Every now and then the cards shoot to 511 degrees and everything locks up (I think that is unrelated to overclocking and might be due to keeping the cards/board/PSU way too cold.) Nevertheless, this still isn't 29MH/s or even 25MH/s per card which I'm sort of expecting.

Not sure if this helps...

[chem96]

Also if I may, (if this thread isn't the place to ask for ethOS technical advice please let me know, but I am dying to ask for some help from the concentration on smartest people on the subject) - would anyone be willing to help me with the overclocking of two dissimilar AMD cards ( 1 4gb ellesmere rx 570 113-2e366fu-o53 elpida (edw4032babg) and 1 8gb ellesmere rx 480 113-d0090101-100 samsung (k4g80325fb) and I I'm only getting about 23.5 Mh/s. Other vitals posted in screenshot. https://ibb.co/dW8Oeb

I've attempted overclocking the cards independently and can't seem to single them out for their specific instructions (I've tried matching by BIOS, ect)

Could someone AMD familiar post me an example config to attempt. I feel like I'm not using these cards effectively.

Thank you so much if you're able to help.

I too am struggling with this. I've been googling for my gpu bios and then copying what other ethosdistro folks have done. For example, i'm running 7 -- rx 570 (113-57045EHB1-W90 Elpida)

I found this...

Code:

# FROM: http://lhmach.ethosdistro.com/?bios=yes 
# rig: loc: lhm200 -- 7a2a69 

#cor 113-57045EHB1-W90 1080 
#mem 113-57045EHB1-W90 1970 
#pwr 113-57045EHB1-W90 2 
#vlt 113-57045EHB1-W90 940 

I tried this out and I do get about 22.50 MH/s per card. Unfortunately, two of my seven cards are unstable at this setting and after about five minutes it starts going all over the place. I've checked and double checked power, risers, etc.... So I decided to tweak the per card settings. Now I'm using (lots of little experiments in here...)

Code:

cor myrig0  1080  1080  1080  1080  1110  1080  1110 
mem myrig0  1980  1980  1980  1980  1850  1980  1850 
pwr myrig0  2     2     2     2     2     2     2 
vlt myrig0  940   940   940   940   1050  940   1050 
fan myrig0  40    40    40    40    40    40    40 

which is a little more stable. I get about ~22.5 on five cards and ~21.0 on two cards. Every now and then the cards shoot to 511 degrees and everything locks up (I think that is unrelated to overclocking and might be due to keeping the cards/board/PSU way too cold.) Nevertheless, this still isn't 29MH/s or even 25MH/s per card which I'm sort of expecting.

Not sure if this helps...

You should flash your cards-Bios to reach better MH/s --> 29MH/s easy with RX570
go to anorak.tech to find the right BIOS.

It's very easy with ethos to flash the Bios

• minestop && disallow
• Get the adaptor numbers for the cards with sudo atiflash -i
• Save your current bios for backup sudo atiflash -s <adaptor number> backupbios.rom
• Flash the new bios onto the card  sudo atiflash -f -p <adaptor number> /path/to/newbios
• Repeat. Do each card one by one, reboot, and check.

[pstryer]

Hello All - (Total noob here be gentle) I have been Dual Mining ETH/SIA for about a month with 17 Nvidia 1070 GPUs and it has been working great, till the SIA fork and now it takes me 9 days to pay out 1000 sia where I was getting 1000 every 1.5 days. I know there is a bug in the new fork but don't want to wait for the fix. I'm very new at all this mining stuff (2 months) so I need some help on what is possible and how to configure it.

A few questions:
1. What coins can i dual mine together with Claymore?
2. Does any of the other mining software in Ethos dual mine?
3. Can I mine ETH and ZCASH and if so how do I configure that? - I see a lot of Windows miners doing this from google searches but never Ethos.
4. Can I mine ETH and DCR and if so how do I configure that?
5. Can I mine ETH and XMR and if so how do I configure that?
6. None dual mined can I mine DASH with ETHOS and GPUs, if so how do I configure that and what mining software do I use?
7. Also none dual mined can I mine litecoin with ETHOS and GPUS if so how do I configure that and what mining software do I use?

As you can see I have many questions and Google and the EthOS knowledge base do not seem to be my friend when learning about Ethos and how to configure it. Everything I find on line never answers the questions I have or how to configure things. And the knowledge base is very vague with most subjects.

Thank You in advance for any help I get from this forum.

Cheers
Paul

[kriskarthik]

If I need set core clock as +100 and mem clock as 500 then

Globalcore 100
Globalmem 500

Is this correct or should I add the numbers to my GTX1070 clock limit and give the total?

Below I found in manifacture’s site
Graphics Clock   1506MHz
Boost Clock   1683MHz
Memory Clock    8000MHz

Can someone please help me understand ?

[Xexen4]

If I need set core clock as +100 and mem clock as 500 then

Globalcore 100
Globalmem 500

Is this correct or should I add the numbers to my GTX1070 clock limit and give the total?

Below I found in manifacture’s site
Graphics Clock   1506MHz
Boost Clock   1683MHz
Memory Clock    8000MHz

Can someone please help me understand ?

globalcore globalmem params uses for all rigs on config file. if all of your cards are same, its usefull.
otherelse if you want to +100 use +100 on config file.

cor RIGUNIQID +150 +150 +150 +150 +150 +150 (for 6gpu write 6 times)
mem RIGUNIQID +500 +500 +500 +500 +500 +500

[kriskarthik]

If I need set core clock as +100 and mem clock as 500 then

Globalcore 100
Globalmem 500

Is this correct or should I add the numbers to my GTX1070 clock limit and give the total?

Below I found in manifacture’s site
Graphics Clock   1506MHz
Boost Clock   1683MHz
Memory Clock    8000MHz

Can someone please help me understand ?

globalcore globalmem params uses for all rigs on config file. if all of your cards are same, its usefull.
otherelse if you want to +100 use +100 on config file.

cor RIGUNIQID +150 +150 +150 +150 +150 +150 (for 6gpu write 6 times)
mem RIGUNIQID +500 +500 +500 +500 +500 +500

Wow so we can use the + and the incremental value. Thanks for the clarification. I was struggling with that set up as I just moved from win10 to ethOS. Just another quick question, all of my GPUs are same, so can I use the incremental value like +100 in global core, global mem to apply it to all GPU/rigs ?

[cover2sink]

https://i.imgur.com/gn4YmsO.jpg

5x RX570's, 1x RX580 8gb

Are my hash rates about right?

[deadsix]

If I need set core clock as +100 and mem clock as 500 then

Globalcore 100
Globalmem 500

Is this correct or should I add the numbers to my GTX1070 clock limit and give the total?

Below I found in manifacture’s site
Graphics Clock   1506MHz
Boost Clock   1683MHz
Memory Clock    8000MHz

Can someone please help me understand ?

globalcore globalmem params uses for all rigs on config file. if all of your cards are same, its usefull.
otherelse if you want to +100 use +100 on config file.

cor RIGUNIQID +150 +150 +150 +150 +150 +150 (for 6gpu write 6 times)
mem RIGUNIQID +500 +500 +500 +500 +500 +500

Wow so we can use the + and the incremental value. Thanks for the clarification. I was struggling with that set up as I just moved from win10 to ethOS. Just another quick question, all of my GPUs are same, so can I use the incremental value like +100 in global core, global mem to apply it to all GPU/rigs ?

Voltage and clock sensitivity varies from GPU to GPU (even if all of them are the same make/model) so while a liberal increment/offset value applied to all cards   would work, you will have to tune them individually to extract the maximum out of them.

[maxmeme]

Depending on the coin you mine, you may need to change the settings accordingly. E.g neoscrypt and equihash,  also the memory clock must be compatible with your card.

[kriskarthik]

Yes, I’m mining Zcash and I have the overclock setting that I was using in Windows before I jump into the ethos operating system. In Windows AfterBurner it’s pretty straight forward to give the delta. Now I understood the ethos side as well with the help of you guys. Thanks for that.

[813bits]

I have been using ethOS for sometime now and love the stats panel to manage all of my miners, however there is one variable I do not know how to read.  What is the "L - 5 minute load average (sysload)" value?  It seems like 90% of my miners are running a sysload between 0.2-0.5, but some are running at 1.4-1.6 and even one at 2.4.  If I look at the historical graph for one of the miners running at 1.4, I see that it was running for a long period at 0.2 and then jumped to 1.4 for several days.  How do I interpret this value and are the any actions I should take?

Thanks.

[Coltcaine]

https://i.imgur.com/gn4YmsO.jpg

5x RX570's, 1x RX580 8gb

Are my hash rates about right?

those are nice hash rates how did you get them bios mod or config settings? what cards?

[Xexen4]

i guess 570's has samsung memory chips. i have msi 570 armor and hashrate is 27.6 (hynix)

[Matias]

Hi!

I'm using ethOs with ethminer and card is GTX 970 4G. Ethminer shows hashrate 10.3-10.3-10.3-15.7-10.3.-10.3-10.3-15.7 Mh/s. Why every fourth is bigger? Could I do something so that I would get 15.7 Mh/s all the time?

[thierryouellet]

Hi!

Is anyone using KlausT version of ccminer under EthOS? The hashrate is far superior under Windows. I have 1210 compared to 900 for Neoscrypt.

Please advise.

Thanks!