[MOJO] MOJOv3 has been taken over by new devs

[EBK1000]

POLL results:

Question:   Is it worth paying 3 BTC to get Mojocoin on Bittrex immediately after launch?
Yes: 20 (66.7%)
No, wait for it to happen: 10 (33.3%)

I guess that speaks for itself.

I was in the no's personally, always figure its better for the coin to get there on its on merits however it is good exposure

The wallets running on my NUC as i can leave that running 24/7 should help the network a bit 

I tend to agree that it's better to be added due to general demand. I guess that most of the yes votes are looking to make a quick profit when it's listed. We will have to see towards the end of the ICO and see what exchanges we can get on and make a final decision. If it benefits us then it is worth it, if that means that we can expand our reach and work towards real life use.

[davide72]

Hi dev sorry this is my wallet! i will now make to open the post on bitcoingarden!
MPAAt6fsJGpEYUQN3QGm72NZFHNfEuJ4NR


http://bitcoingarden.tk/forum/index.php?topic=6667.new#new

this is the link i just opened  it now!

[quasimodo]

Coins received, my wallet is open 24/7. Thanks

[diks]

Coins received, my wallet is open 24/7. Thanks

i sent my mojo to coinwallet.co
POS works fine!

[EBK1000]

Still haven't received my coin. PM sent to dev again. Hope he can check and resend soon.

It's been sent, no need to panic, I said in the next day or so.

[EBK1000]

JUST FOR INFORMATION

This initial round of MOJO distribution that started yesterday is ONLY for participants in the initial NxtMOJO project from 2015. I will 'swap' or 'replace' 1:1 old NxtMOJO with new Mojocoin. I have PMd everyone on the initial list and I have tried to update the spreadsheet as best I can.

If you had old NxtMOJO and you have not been paid in new Mojocoin, please CHECK the spreadsheet:

https://docs.google.com/spreadsheets/d/192i34aIRyfapGDkfUYm5Tev6XxvM_mGniVWktLaPpS0/edit?usp=sharing

All the payments are marked up. If you are on the sheet and has not been paid, PM me with your Mojocoin address and I will deal with it.

The only other payments made are for bounties. The ICO payments will commence at the moment the ICO ends.

We have decided to do this to strengthen the network and sort out any issues (if there are any before the general launch).

ED: There are still a number of people who have not responded to the PM about the swap for whatever reason. I will do another two rounds of PMs for anyone that hasn't provided a new Mojocoin address and set the deadline of 31/03/2016 to provide a new Mojocoin address. The remaining unclaimed coins will then be distributed evenly between all ICO participants. At the moment there are around 500,000 unclaimed Mojocoins.

[EBK1000]

Coinfest UK 2016 update

We have had 100 scratch cards made for the event on 8th and 9th April 2016 in Manchester. We will fill various amounts of Mojocoins onto the cards for a giveaway. This means 100 new Mojocoin users come first week of April. This bodes well for our ICO participants as this is likely to have a positive impact on demand. Have a look at the scratch cards we had made:



I would therefore suggest that you get onto Bittrex and try to build a bit of pressure to get us listed ahead of Coinfest UK 2016.

[escapeX]

Hi dev.Why my wallet is out of sync?I have downloaded all blocks but it's still out of sync..

[OKtoshi]

ROKOS v5 Flavors Released!

Support thread: ROKOS Flavors

Visit the New ROKOS website at: http://rokos.space

ROKOS v5 "Flavors" Released. Full OS with Cryptocurrency Clients, full nodes and much more. Faster, Easier, Stronger.

Just Burn and Click to Start your own Cryptocurrency Full Node or Client

Cryptocurrency and the Internet of Things
Flavors: Raspbian based OS with integrated Cryptocurrencies Clients, Nodes ready for use.

We've seen new services selling "stake miners" for different currencies, we support the new technology and uses for cryptocurrencies in the Raspberry Pi environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with BTC, OK and more cryptocurrencies, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin + 11 Cryptocurrencies Clients and nodes as well to provide the users with the best and easier Out of the Box experience.

v5 "Flavors" Released

The First OS image release that merges the full power of Raspberry Pi 2, Banana Pi PRO & IoT Devices with Bitcoin and Cryptocurrencies:
- ROKOS v5 "Flavors" comes with integrated Cryptocurrencies Clients / nodes .

Distribution aimed for everyone, from new Pi users to Pi Developers, Ease of use Out of the Box.
Download & Burn, Ready for use.

March 07 2016

ROKOS v5 "flavors" for Raspberry Pi 2 - Download (2.2Gb)
March 07 2016
MD5 Checksum:
SHA-1 Checksum:
SHA-256 Checksum:
SHA-512 Checksum:


ROKOS History releases link.

*Official Download Links - Do Not Download from other sources, posts, links to ensure the security of your downloads*

Specs:

v5 "flavors" Release (Pi2) March 07 2016
- Full burnable OS Compatible with the Raspberry Pi systems.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Iceweasel browser.
- Autolog.
- Debian.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Updated Out of the box Firewall ready for use (gui) (start in terminal: gufw)
- Includes Qt and complete set of Dev tools (For developers)
- Includes Qt 3.2.1 Native / Qt 5.5.1 for Cross compile !
- Works with other cryptocurrencies.
- 1024mb swap mod.
- Updated Cryptocurrencies Included:
Bitcoin, OKCash, Blackcoin, Gamecredits, Digitalcoin, Diamondcoin,
Energycoin, Europecoin, Soil, Metalcoin, Transfercoin, Mojocoin. (Readme.txt)
- Custom Login and Wallpapers.
- Cryptocurrencies nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Direct access to the Clients Via: Task bar and Menu > Internet.
- ZIP file - Compression: 2.2Gb image to download, 6.1GB uncompressed to burn.


Requirements:
ROKOS v5 "flavors":
- Raspberry Pi 2 (Pi2 full power use by debian jessie base)

- Min 8gb SD card and an External device (usb / hdd / ssd). To sync the Cryptocurrencies chains on the external device instead of the SD card.


Future Versions:
- Security updates.
- Chain Updates.
- More Cryptocurrencies will be integrated for an Out of the Box experience and adoption.
- Designs Updates.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.

ROKOS v5 "flavors" Screen Shots

"ROKOS" Initial Setup

1.- Download and Burn the ROKOS Image to a micro SD Card like you would with any other Pi Distro.
March 01 2016
ROKOS v5 "flavors" - DOWNLOAD

Steps for first boot

*Raspberry Pi 2:
User: pi / Password: raspberry , follow normal setup.

a) Type: sudo raspi-config
b) Set your Time Zone, change your pi user password and Expand the file system, restart.
After restart the system you can type:  "startx"   to start the user desktop.
c) System ready for use.

Welcome to the ROKOS Desktop

Final steps / BTC and OK Clients

a) Go to Menu > Internet and Click on your favorite Cryptocurrency Wallet

This will open the Cryptocurrency wallet and start sync.

*For some Cryptocurrencies the initial sync might take some days, wallets are fully usable after being fully Synchronized.

b) Always remember to make constant backups of your wallets and save them in USB or external media.

Use your wallets in ROKOS to plug HW and mine, Send/Receive, Stake, Share,
become a full node and support your favorite Cryptocurrency network, develop new applications,
etc, the limit is only in your imagination.


Important Security Notice:
*) Remember to create a backup for your Wallets, you can use the wallets to create them and save in different folders on a USB device.
You should ALWAYS have a backup of your wallet, Raspberry Pi Hardware, Raspbian and ROKOS Software are under development hence not responsible for missuses, electrical or compatibility issues that might cause a loss of information. It is as secure as one's ability to take care for it, same as a computer, so always have a backup of your wallets on an external device.

*) Some people tend to recommend getting a 128Gb MicroSD HC (High speed) , at the same time it does work, I do not recommend this solution, as microSD cards tend to get corrupted by the number of overwrites, to ensure the best functionality and security you should use an external HDD/USB storage device to store the chains.

You can start testing and developing new integration with ROKOS and your favorite cryptocurrencies for your IoT projects.

***********************

ROKOS is Released for Free to support Bitcoin OK and the crypto environment adoption
If you find this work valuable or if it helped your project and You would like to support feel free to share your donations at

BTC  15VrDkat5vD4FfycRk3E4e7EgqftzK6tm8
OK  PWZg5F7NurKDNGdckRpQgmShEQhEHmF5W5
GMC  GcVNPqcDdqZLbEh65eyo4ADPEKBsU4tyLi
BLK  B8kBAXZbkXDKJ9Zu7dcarUCp8SfnyoKWVe
DMD  dLSokViLNuMD1q6kssWMtv9vvgau4Yo5GV
DGC  DQfpBXe11e7YnWmyNpeg6wkESiWN1ENEPp
ENRG  e7t3em8YTwFRXeSQtXumhDBqQzzphoiQnu
ERC  EKz7czViBqwSu8Ne2omxaznMnkAY4FqkJB
METAL  MNgjwErYStsEfyKiSoUfyoX877kZcSpmZG
MOJO  MSztn2BwFjhgm9e5nEBwDzAr1r4UcxYLRY
TX  Tk38sE6rLz63JtbErecGgqJxdB5RKMdnbz
SOIL  0x3df2e34602fd5711b2f32daebeff96df0a4df113

Contact: OKtoshi at devteam@okcash.co

***********************

"Empower yourself and build your own Bitcoin and Cryptocurrencies Fullnode Guide"

ROKOS Guide from zero! Full steps for New Users
by SwedishBitMiner

---Prepare the MicroSD/MicroSDHC card---

(I did this on a Windows computer, and I dont know what tool to use for Mac to install the iso file Image burner, for this guide you will have to figure out that yourself, if you use Mac)

1. Download and install SD Formatter 4.0 (This is the tool to format the SD card) from:
Windows: https://www.sdcard.org/downloads/formatter_4/eula_windows/SDFormatterv4.zip
Mac: https://www.sdcard.org/downloads/formatter_4/eula_mac/SDFormatter_4.00B.pkg
(or find it yourself at: https://sdcard.org/downloads)

2. Insert the MicroSD/MicroSDHC card into your PC/Mac. (You will probably need an MicroSD to SD adapter for this).

3. Start SD Formatter 4.0 and click the [Option] button. In there you change from "FORMAT TYPE: QUICK" to "FORMAT TYPE: (FULL)Erase", just leave the "FORMAT SIZE ADJUSTMENT" in OFF and click the [OK] button so start the format. When the card is completely formatted click the [Exit] button to close SD Formatter.

4. Download and install Win32 Disk Imager (This is the iso file Image burner) from:
Windows: http://sourceforge.net/projects/win32diskimager/files/latest/download

5. Download ROKOS Core (rokos5.img.zip) and unzip the ISO file (This is the awesome ROKOS Core "Operating System" that we are going to install on the SD card) from:
Download: http://bit.ly/rokos5flavors
(or find it yourself at: http://rokos.space

6. Start Win32 Disk Imager, press the "little blue folder" and select the "rokos5.img" file that you did extract. Make sure your SD card is selected in the list to the right and press the [Write] button. It will tell you that it can corrupt the SD card, just press [Yes] to continue the installation, when the installation to the SD card is done press the [Exit] button to close Win32 Disk Imager.

7. Now "Safely remove" your SD card from the computer.

8. Put the MicroSD/MicroSDHC card in your Raspberry Pi 2, and make sure you got an USB Keyboard, Monitor (via HDMI), and and Internet cable connected to the Raspberry Pi 2 before you connect the power cable to your Raspberry Pi 2.

---Installing ROKOS ---
(The first boot of ROKOS )

1. Type:

Code:

sudo raspi-config

(and press enter)

2. Select:

Code:

1. Expand Filesystem

(and press enter) press enter again on the <Ok> button.

3. Select:

Code:

2. Change user password

(and press enter) press enter again on the <Ok> button. Type a new password (you will not see the letters) and press enter, type your new password again, and press enter. Then press the <Ok> button.

4. Select:

Code:

5. Internationalization Options

(and press enter) Then select:

Code:

I2. Change Timezone

(Choose your timezone)

5. Press the "TAB" button on your keyboard two times to get to the <Finish> button, and press enter. Then choose <Yes> to restart your system.

6. Type:

Code:

startx

(and press enter) your system will now start up and you are DONE!

ENJOY THIS AWESOME OPERATING SYSTEM!

[nagatraju]

Staking is not working, I am online from last three days, but staking says "expected time to reward xx seconds" - but no reward yet.

Can you fix this bug?

[EBK1000]

Staking is not working, I am online from last three days, but staking says "expected time to reward xx seconds" - but no reward yet.

Can you fix this bug?

Which wallet are you using? And what does it say when you hover over the "arrow up" icon in terms of your weight and the network weight?

Check the block explorer: https://chainz.cryptoid.info/mojo/# and https://chainz.cryptoid.info/mojo/#!extraction

All the block now are 'proof of stake' blocks and I know that numerous others wallets are staking so I think it may just be that as you have 5000 MOJO it will take a long time as 5000 MOJO is a small proportion of the total. I know that my wallet stakes and others do and also Coinwallet.co is staking so I don't think there is a bug, just low stake weight for you. This may pick up as the distribution continues and the MOJOs get spread out.

[badykvik]

Staking is not working, I am online from last three days, but staking says "expected time to reward xx seconds" - but no reward yet.

Can you fix this bug?

I received one stake already and one is on the way. It seems ok for me.

[EBK1000]

Hi,dev,i still can't get my coin.I have invest 0.5BTC here is my adress
M9KXmVEcpKUh3BNpF9d16aWwCCmxpwfx69
I'm on the distribution list

The distribution will start the moment the ICO ends on 31/03/2016. This is a 'weighted ICO' so that means that the final balance is not known until the end of the ICO. I will then publish a final distribution list and you should get your coins shortly after that. This is clear from the OP and the website. If you follow the ICO you will see that the values will change slightly as more people get on board.

[TheTribesman]

Wallet up and running

[CryptoHobo]

Staking is not working, I am online from last three days, but staking says "expected time to reward xx seconds" - but no reward yet.

Can you fix this bug?

I received one stake already and one is on the way. It seems ok for me.

same, 3 blocks so far:

https://chainz.cryptoid.info/mojo/address.dws?MUu5WKDFk77AyRkGEUK9Cjw2qiAwL6SCaS.htm

[EBK1000]

Staking is not working, I am online from last three days, but staking says "expected time to reward xx seconds" - but no reward yet.

Can you fix this bug?

I received one stake already and one is on the way. It seems ok for me.

same, 3 blocks so far:

https://chainz.cryptoid.info/mojo/address.dws?MUu5WKDFk77AyRkGEUK9Cjw2qiAwL6SCaS.htm

I don't think there is anything the matter with the staking, it's just that the block times are a bit funny until more coins are spread out. I also think that you may have to wait a bit if you only have 5000 MOJO. It will level out and get regular.

[bhokor]

Staking is not working, I am online from last three days, but staking says "expected time to reward xx seconds" - but no reward yet.

Can you fix this bug?

I received one stake already and one is on the way. It seems ok for me.

same, 3 blocks so far:

https://chainz.cryptoid.info/mojo/address.dws?MUu5WKDFk77AyRkGEUK9Cjw2qiAwL6SCaS.htm

I don't think there is anything the matter with the staking, it's just that the block times are a bit funny until more coins are spread out. I also think that you may have to wait a bit if you only have 5000 MOJO. It will level out and get regular.

Agree with that, actually if someone with few coins wants to stake in my opinion the best option is coinwallet.co they are staking very often, and when you get enought coins the you can jump to do or solo staking, the other option is simply to wait.

[EBK1000]

Staking is not working, I am online from last three days, but staking says "expected time to reward xx seconds" - but no reward yet.

Can you fix this bug?

I received one stake already and one is on the way. It seems ok for me.

same, 3 blocks so far:

https://chainz.cryptoid.info/mojo/address.dws?MUu5WKDFk77AyRkGEUK9Cjw2qiAwL6SCaS.htm

I don't think there is anything the matter with the staking, it's just that the block times are a bit funny until more coins are spread out. I also think that you may have to wait a bit if you only have 5000 MOJO. It will level out and get regular.

Agree with that, actually if someone with few coins wants to stake in my opinion the best option is coinwallet.co they are staking very often, and when you get enoug coins the you can jump to do or solo staking, the other option is simply to wait.

I agree, I think Coinwallet.co is a good option, I sent a few MOJOs there and it's staking fine...

[svetoch]

I do not understand one thing. coins Stake is, in the POS display shows don't have mature coins

[davide72]

i have another question , if i do use online wallet to stake..do i get rewarded if i do close my web wallet?
thanks!