Panadacoin
|
|
March 24, 2016, 06:08:34 PM |
|
Same error. Do you know what I'm doing wrong?
Exactly, same error again and again on any name used. After struggling with this and some looking in the code, I had to start the name with digit, so it is accepted. But I am getting tired of this coin honestly. Too much undocumented stuff, and this question with parsing error was asked about 3 times in prev thread too, with no answer. Ffs exactly the opposite of what's stated in the op. Thank you for your help drays. But I am still not sure this is correct... By the way names stating with "n", "t" and "f" should be accepted too, you can try it. This is crazy. I would appreciate a comment from the developer. where did you get private key? nvm I got it
|
|
|
|
OrsonJ
|
|
March 24, 2016, 06:12:43 PM |
|
Same error. Do you know what I'm doing wrong?
Exactly, same error again and again on any name used. After struggling with this and some looking in the code, I had to start the name with digit, so it is accepted. But I am getting tired of this coin honestly. Too much undocumented stuff, and this question with parsing error was asked about 3 times in prev thread too, with no answer. Ffs exactly the opposite of what's stated in the op. Thank you for your help drays. But I am still not sure this is correct... By the way names stating with "n", "t" and "f" should be accepted too, you can try it. This is crazy. I would appreciate a comment from the developer. Likewise. By the way I know this is a dumb question but do you know what the command is to get your balance?
|
|
|
|
Mysterion
Newbie
Offline
Activity: 48
Merit: 0
|
|
March 24, 2016, 06:13:15 PM |
|
Same error. Do you know what I'm doing wrong?
Exactly, same error again and again on any name used. After struggling with this and some looking in the code, I had to start the name with digit, so it is accepted. But I am getting tired of this coin honestly. Too much undocumented stuff, and this question with parsing error was asked about 3 times in prev thread too, with no answer. Ffs exactly the opposite of what's stated in the op. Thank you for your help drays. But I am still not sure this is correct... By the way names stating with "n", "t" and "f" should be accepted too, you can try it. This is crazy. I would appreciate a comment from the developer. where did you get private key? nvm I got it Where did you find it?
|
|
|
|
thereverseflash (OP)
Member
Offline
Activity: 70
Merit: 10
I'll be able to change everything!
|
|
March 24, 2016, 06:18:19 PM |
|
If you are having errors on the CLI then I recommend editing datadir/config.ini
The default generated on should provide a template.
Names starting with n, t, and f are being flagged by the JSON parser "null", "true", and "false".
If you don't use quotes then those names will fail.
|
Are you fast enough?
|
|
|
OrsonJ
|
|
March 24, 2016, 06:23:01 PM |
|
Is there a flag to mine with multiple cores?
|
|
|
|
thereverseflash (OP)
Member
Offline
Activity: 70
Merit: 10
I'll be able to change everything!
|
|
March 24, 2016, 06:25:38 PM |
|
Command Line Walletstart steemd with --rpc-endpoint cd programs/cli_wallet ./cli_wallet new >>> set_password "PASSWORD" locked >>> unlock "PASSWORD" unlocked >>> import_key ${WIFKEY} unlocked>>> get_account youraccountname {...}
Is there a flag to mine with multiple cores?
--mining-threads=N
|
Are you fast enough?
|
|
|
kahir
Legendary
Offline
Activity: 1050
Merit: 1000
|
|
March 24, 2016, 06:30:06 PM |
|
reverseflash
can we expect windows binary wallet soon ?
|
|
|
|
thereverseflash (OP)
Member
Offline
Activity: 70
Merit: 10
I'll be able to change everything!
|
|
March 24, 2016, 06:43:04 PM |
|
reverseflash
can we expect windows binary wallet soon ?
Do not plan on producing binaries for any platform at this point in time.
|
Are you fast enough?
|
|
|
Panadacoin
|
|
March 24, 2016, 06:45:19 PM |
|
If you are having errors on the CLI then I recommend editing datadir/config.ini
The default generated on should provide a template.
Names starting with n, t, and f are being flagged by the JSON parser "null", "true", and "false".
If you don't use quotes then those names will fail.
All of this is backwards steemd will not run with any names that are started with a letter other than n, t, or f. Otherwise, it is needed to be started with a number. Why is it working the opposite of what you say?
|
|
|
|
thereverseflash (OP)
Member
Offline
Activity: 70
Merit: 10
I'll be able to change everything!
|
|
March 24, 2016, 06:51:57 PM |
|
If you are having errors on the CLI then I recommend editing datadir/config.ini
The default generated on should provide a template.
Names starting with n, t, and f are being flagged by the JSON parser "null", "true", and "false".
If you don't use quotes then those names will fail.
All of this is backwards steemd will not run with any names that are started with a letter other than n, t, or f. Otherwise, it is needed to be started with a number. Why is it working the opposite of what you say? The blockchain indicates that people are able to have names starting with all letters. If you are not using the config.ini file then perhaps you may need '"name"' on your console. It might be a shell issue. In any event, I recommend using config.ini to save your setting and make it more secure.
|
Are you fast enough?
|
|
|
OrsonJ
|
|
March 24, 2016, 06:55:29 PM Last edit: March 24, 2016, 07:10:21 PM by OrsonJ |
|
Finally hashing. One final question if you don't mind, how do I find my balance? I've tried several of the commands. list_my_accounts for instance doesn't show anything useful and get_account youraccountname gives me !accounts.empty(): Unknown account. Thanks.
|
|
|
|
STEEMD
Member
Offline
Activity: 83
Merit: 10
|
|
March 24, 2016, 07:09:40 PM |
|
Finally hashing. One final question if you don't mind, how do I find my balance? I've tried several of the commands. list_my_accounts for instance doesn't show anything useful. Thanks. list_my_accounts will show ur account/s details including the balance only if you have imported your key via import_key command EDIT: if you see balance 0 it means you still got no blocks
|
|
|
|
OrsonJ
|
|
March 24, 2016, 07:14:32 PM |
|
Finally hashing. One final question if you don't mind, how do I find my balance? I've tried several of the commands. list_my_accounts for instance doesn't show anything useful. Thanks. list_my_accounts will show ur account/s details including the balance only if you have imported your key via import_key command EDIT: if you see balance 0 it means you still got no blocks I tried that using the priv key i'm using for mining but the response was: websocket_api.cpp:77 on_message ] message: {"id":17,"result":[[]} [] I used the priv key by using the command get_private_key on the "active" public key listed after creating the account. Was that wrong?
|
|
|
|
STEEMD
Member
Offline
Activity: 83
Merit: 10
|
|
March 24, 2016, 07:19:35 PM |
|
Finally hashing. One final question if you don't mind, how do I find my balance? I've tried several of the commands. list_my_accounts for instance doesn't show anything useful. Thanks. list_my_accounts will show ur account/s details including the balance only if you have imported your key via import_key command EDIT: if you see balance 0 it means you still got no blocks I tried that using the priv key i'm using for mining but the response was: websocket_api.cpp:77 on_message ] message: {"id":17,"result":[[]} [] I used the priv key by using the command get_private_key on the "active" public key listed after creating the account. Was that wrong? use the commad : suggest_brain_key it will print out a key and a memo passpharse
|
|
|
|
drays
Legendary
Offline
Activity: 2576
Merit: 1073
|
|
March 24, 2016, 07:29:45 PM |
|
steemd does not eat any considerable amount of cpu time on my vps. Does it mean it is not hashing at all?
|
... this space is not for rent ...
|
|
|
Eclipse Crypto
Member
Offline
Activity: 98
Merit: 10
|
|
March 24, 2016, 07:35:00 PM |
|
If you are having errors on the CLI then I recommend editing datadir/config.ini
The default generated on should provide a template.
Names starting with n, t, and f are being flagged by the JSON parser "null", "true", and "false".
If you don't use quotes then those names will fail.
All of this is backwards steemd will not run with any names that are started with a letter other than n, t, or f. Otherwise, it is needed to be started with a number. Why is it working the opposite of what you say? You are doing it wrong. Don't use a number. The dev's instructions are wrong. Use this: The json parser is looking for quotes, so you have to single-quote them in the shell. Make sure you single quote the miner array too, but don't single quote the seed node. --miner='["yourname","5........."]' --seed-node="52.38.66.234:2001"
|
|
|
|
thereverseflash (OP)
Member
Offline
Activity: 70
Merit: 10
I'll be able to change everything!
|
|
March 24, 2016, 08:04:13 PM |
|
steemd does not eat any considerable amount of cpu time on my vps. Does it mean it is not hashing at all?
Try adjusting --mining-threads=N make sure you specify a witness and a miner.
|
Are you fast enough?
|
|
|
thereverseflash (OP)
Member
Offline
Activity: 70
Merit: 10
I'll be able to change everything!
|
|
March 24, 2016, 08:11:25 PM |
|
Those who are mining, please share why you are spending time mining this.
|
Are you fast enough?
|
|
|
NextGenCrypto
|
|
March 24, 2016, 08:12:55 PM |
|
Those who are mining, please share why you are spending time mining this. Personally, I love mining perceived shitcoins.
|
|
|
|
Panadacoin
|
|
March 24, 2016, 08:22:39 PM |
|
Anyone find anything yet(not dev)? I have 10,000 hps and still nothing, or I think nothing cause list_my_accounts 3575798ms th_a websocket_api.cpp:77 on_message ] message: {"id":14,"result":[[],[],[]]}
shows that, and am guessing it means empty.
|
|
|
|
|