¤¤¤¤ gekkorun.de - Gekkoscience Fun-Run - compare your share ¤¤¤¤

[andymanone]

Hey Hey i setup a 2Pac as well today , think i did it right here's my info!

Username - CjMapope
Country-Code - CAN
BTC Worker - 1PCcDHj3K5kLrBWtLwqCmK7WxwnzKwwZbh.Cj1
frequency - 190

Thx!

Hi CjMapope, thx 4 joining .
You´re added too.

Cheers,
andY

[andymanone]

@vh:
You´re added now.

Have fun .

Cheers,
andY

I see it.   Sweet, 41/42 and heading up soon.   Thanks for keeping the run updated.

You´re welcome .

andY

[Mikestang]

Great work on the new site, Andy.  I have a suggestion/question.  Could it be possible to create a new column for the G1/A1/G4/A2 etc. label and then make the site sortable by column?  This would facilitate comparing the same miners.

Also, it might be useful to define what the difference between G1 and G2 and G4 is, for example.

Keep on running!

[andymanone]

Great work on the new site, Andy.  I have a suggestion/question.  Could it be possible to create a new column for the G1/A1/G4/A2 etc. label and then make the site sortable by column?  This would facilitate comparing the same miners.

Also, it might be useful to define what the difference between G1 and G2 and G4 is, for example.

Keep on running!

Hi Mike, thanks for your feedback and your suggestions!

The problem is, thats not my code (the software code is from the community member "minibit", but he is very busy and off now and left this project ).

Unfortunately I´ve very limited skills in php and mysql programming, so I´m only able (in a autodidactically way) to administrate the site and the users,
but to renew or reprogramming the site is a formidable challenge for me....

@ the G1, G2  etc naming:
Its easy to explain :
If a user is sending more than one racer to the challange, it will be named  "Miner+1"

See below:

1. Gekkoscience Compac:  G1, G2, G3, G4, Gx
2. Antrouter R1:  A1, A2, A3, A4, Ax
3. Gekkoscience 2PAC:  G2P1, G2P2, G2P3, G2P4, G2Px
4. Sidehack BF Miner:  SBF1, SBF2, SBF3, SBF4, SBFx

Maybe i´ll try to learn more about php / mysql soon, so I can make more improvements on the gekkorun.de site.

Cheers,
andY

 

[Morguk]

Anyone got an easy minera fix for this so I can separate my compacs into different workers?

[earlmo]

Ahhh!  User vh and their 2Pac is catching up to me for the most shares submitted!  It's only a matter of time now.

Fortunately for me it will take 6.25 years to catch me at the current rates, but still I'm keeping my eye on you.

.earl

[vincku]

Still here actually.
I 've changed my receiving address.

Username  Vincku
Country-Code FR
BTC Worker: 1DjLhRM4fgWmaZFU5U4e8js2g35pyGxBKz

[valkir]

Hey Hey

Im in!

Username: Valkir
Country-Code: CAN
BTC Worker: 1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir1
Frequency : 150

Working to add 2 compac to the race. I need to make my hub work. If anyone have some advice. I can see the stick in device manager but when I start cgminer, he does see them.

[earlmo]

Im in!

Username: Valkir

Working to add 2 compac to the race. I need to make my hub work. If anyone have some advice. I can see the stick in device manager but when I start cgminer, he does see them.

I'm assuming that cgminer does not see them?  Anyway, try cgminer.exe --usb-dump 0 and see what cgminer reports.

.earl

[valkir]

Im in!

Username: Valkir

Working to add 2 compac to the race. I need to make my hub work. If anyone have some advice. I can see the stick in device manager but when I start cgminer, he does see them.

I'm assuming that cgminer does not see them?  Anyway, try cgminer.exe --usb-dump 0 and see what cgminer reports.

.earl

Did try it, I got 18 devices saw but 0 know device. Maybe I need more power on that hub. Strange.

[andymanone]

Still here actually.
I 've changed my receiving address.

Username  Vincku
Country-Code FR
BTC Worker: 1DjLhRM4fgWmaZFU5U4e8js2g35pyGxBKz

Hi Vincku.
Thx for the feedback.
Okay, I´ll update it asap.

Cheers,
andY

[andymanone]

Hey Hey

Im in!

Username: Valkir
Country-Code: CAN
BTC Worker: 1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir1
Frequency : 150

Working to add 2 compac to the race. I need to make my hub work. If anyone have some advice. I can see the stick in device manager but when I start cgminer, he does see them.

Hi Valkir,
thanks for joining the race .

If you want to add 2 compacs, so I guess it would be:

BTC Worker1: 1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir1
BTC Worker2: 1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir2

Cheers,
andY

[andymanone]

New block - new luck for everyone !

Cheers,
andY

[andymanone]

Still here actually.
I 've changed my receiving address.

Username  Vincku
Country-Code FR
BTC Worker: 1DjLhRM4fgWmaZFU5U4e8js2g35pyGxBKz

Hi Vincku.
Thx for the feedback.
Okay, I´ll update it asap.

Cheers,
andY

The Gekkorun DB is updated - you´re in now again.

Cheers,
andY

[andymanone]

Hey Hey

Im in!

Username: Valkir
Country-Code: CAN
BTC Worker: 1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir1
Frequency : 150

Working to add 2 compac to the race. I need to make my hub work. If anyone have some advice. I can see the stick in device manager but when I start cgminer, he does see them.

Hi Valkir,
I just didn´t found an active worker with the address: 1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir1

So for the first time I´ve added you w/o a worker (with: 1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e )
I see there a hashrate of ~ 10GH/s, so I guess, your both Gekkos working with the same address (w/o separated workers).
So please, if its possible, separate your Gekkos in two workers (e.g. this) soon:

1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir1
1JYtUxJNMnpg2PU9wpq4bo36WtueNQaD1e.Valkir2

...and leave me a feedback after all, so I can update the database too.

Cheers and have fun !
andY

[vh]

Oh yeah.   New block.

That looks like me at the top  .

Gotta enjoy the spotlight while I can.

[andymanone]

@zOU:

btw.: Whats about your zOU G2 ?

It´s temporary off, or gone forever?

Cheers,
andY

[zOU]

I think it's dead.....

the LED is always on and very bright white.
no amount of unplug/replug did anything to it.
i;ve change the voltage a bit too not to avail....

[andymanone]

I think it's dead.....

the LED is always on and very bright white.
no amount of unplug/replug did anything to it.
i;ve change the voltage a bit too not to avail....

Ohh, that sounds not really good
Will you replace it soon or should I remove it from the Database?

Cheers,
andY

[zOU]

i will try some fixing this week